These include any building or structure, in which products or materials of all kinds and properties are fabricated, assembled, manufactured, or processed, for example, assembly plants, industrial laboratories, dry cleaning plants, power plants, generating units, pumping stations, fumigation chambers, laundries, buildings or structures in gas plants, refineries, dairies and saw-mills, etc.
Buildings under Group G are further subdivided as follows:
a) Subdivision G-I Buildings used for low hazard industries;
b) Subdivision G-II Buildings used for moderate hazard industries; and
c) Subdivision G-III Buildings used for high hazard industries.
The hazard of occupancy, for the purpose of this NBCS, should be the relative danger of the start and spread of fire, the danger of smoke or gases generated, the danger of explosion or other occurrences potentially endangering the lives and safety of the occupants of the buildings.
Hazard of occupancy should be determined by the Authority on the basis of the fire loads of the contents, and the processes or operations conducted in the building, provided, however, that where the combustibility of the material, the flame spread rating of the interior finish or other features of the building or structure are such as to involve a hazard greater than the occupancy hazard, the greater degree of hazard should govern the classification.
For determination of fire loads for arriving at the classification of occupancy hazard, guidance on calorific values of some common materials is given at Annex A.
A broad classification of industrial occupancies based on ‘fire hazard only’ into low, moderate, and high hazard
classes is given at Annex B, for guidance. Any occupancy not covered in Annex B, should be classified in the most appropriate class depending on the degree of hazard.
NOTE — This Annex B is only based on ‘fire hazard’. Other classification of industries based on chemical hazard, pollution, etc, are not addressed in this NBCS.
Where different degrees of hazard of occupancy exist in different parts of a building, the most hazardous of those should govern the classification for the purpose of this NBCS, except in cases where hazardous areas are segregated or protected as specified in this NBCS.
a) Subdivision G-I — This subdivision includes any building in which the contents are of such comparative low combustibility and the industrial processes or operations conducted therein are of such a nature that there is hardly any possibility for any self-propagating fire to occur and the only consequent danger to life and property may arise from panic, fumes or smoke, or fire from some external source;
b) Subdivision G-II — This subdivision includes any building in which the contents or industrial processes or operations conducted therein are liable to give rise to a fire which will burn with moderate rapidity or result in other hazardous situation and may give off a considerable volume of smoke, but from which neither toxic fumes nor explosions are to be feared in the event of fire; and
c) Subdivision G-III — This subdivision includes any building in which the contents or industrial processes or operations conducted therein are liable to give rise to a fire which will burn with extreme rapidity or result in other hazardous situation or from which poisonous fumes or explosions are to be feared in the event of a fire.