The first version of this Part was formulated as Part 4, in the National Building Code of India 1970 (NBC 1970) and was revised in 1983. Subsequently the first revision of this Part was modified in 1997 through Amendment No. 3 to 1983 version of NBC. The modified version of this Part included a few tables for the fire resistance ratings of various building components, such as walls, columns, beams and floors. The requirements for wet riser, down-comer, automatic sprinkler installation, high velocity (10 m/s to 15 m/s) water spray or foam generating system, etc, for buildings were modified. Annex giving guidelines for selection of fire detectors had been deleted and relevant Indian Standards on fire alarm system and smoke detectors had been referred. Also, an annex for determination of fire loads and flue load density for arriving at the classification of occupancy hazard and calorific values of some common materials was included. Annex for broad classification of industrial and non-industrial occupancies into low, moderate and high hazard had also been included.
The NBC was then revised in 2005. In this revision, the significant modifications incorporated were: The text was divided into the following broad clauses: (a) Fire prevention – Covering aspects of fire prevention pertaining to design and construction of buildings on passive fire protection measures, also describing the various types of building materials and their fire rating; (b) Life safety – Covering life safety provisions in the event of fire and similar emergencies, also addressing construction and occupancy features that are necessary to minimize danger to life from fire, smoke, fumes or panic; (c) Fire protection – Covering the significant appurtenances and their related components and guidelines for selecting the correct type of equipment and installation meant for fire protection of the building, depending upon the classification and type of the building. Also, the classification of building based on occupancy was elaborated, wherein, starred hotels were covered as a new Subdivision A-6 under occupancy Group A Residential; heritage structures and archaeological monuments were covered under Subdivision D-3 occupancy Group D Assembly buildings; mixed assembly occupancies were covered as a new Subdivision D-6; underground elevated railways were covered as a new Subdivision D-7 under occupancy Group D Assembly buildings; and TV stations were covered under Subdivision E-5 of occupancy Group E Business buildings. Further, for the external stairs for exit requirements, the width and treads were increased to 1 250 mm and 250 mm, respectively; under the requirements for institutional buildings the clear width of all required exits which serve as egress from hospital or infirmary section was increased from 1.5 m to 2 m. Also, provision of patient-lift was included; and due cognizance of halon phase out programme was taken, while specifying provisions in this Part with respect to fire protection using fire extinguishers/systems. Based on various comments received from time-to-time, an Amendment No. 2 relating to Part 4 of the 2005 version of NBC, was issued.
In the 2016 revision of NBC, the following changes were made:
General:
The scope of application of provisions of this Part of NBC for different occupancies was clarified.
- Definitions of various new terms were included and definitions of some of the existing terms were updated based on latest developments and use.
Fire Prevention:
-
Based on the experience in the use of the provisions of NBC in relation to various occupancies and subdivision classification under various building occupancy types, the same were reviewed and updated. Also, mixed occupancy and minor occupancy were further clarified.
-
Table 1 on fire resistance ratings of structural and non-structural elements was updated.
-
The provisions relating to fire separating walls, fire separating floors and fire partitions were detailed.
-
Provisions of fire safety requirements of services shafts were rationalized and updated.
-
A separate comprehensive clause on electrical power supply distribution for fire and life safety systems was included.
-
Detailed clauses on air conditioning systems towards safety and smoke control integration were provided.
-
Glass facade requirements were detailed towards fire protection and smoke exhaust aspects.
-
A separate comprehensive clause on Fire Command Centre (FCC) was introduced covering various requirements.