Energy Conservation Building Code 2017 Compliance Forms
| Project Info | Project Address: | Date |
| For Building Department Use | ||
| Project Built-up Area (m2): | ||
| Project Above-grade area (m2): | ||
| Project Conditioned Area (m2): | ||
| Applicant Name and Address: | ||
| Project Climatic Zone: |
| Compliance Option | □ Space by Space method | □ Whole Building Method |
|---|
Maximum Allowed Lighting Power (Interior, Section 6.3.2 or 6.3.3)
| Location (floor/room no.) | Occupancy Description | Allowed Watts per m² ** | Area in m² | Allowed x Area |
| ** Document all exceptions Total Allowed Watts | ||||
Proposed Lighting Power (Interior)
| Location (floor/room no.) | Fixture Description | Number of Fixtures | Watts/Fixture | Watts Proposed |
| Total Proposed Watts may not exceed Total Allowed Watts for Interior Total Proposed Watts | ||||
Maximum Allowed Lighting Wattage (Exterior, Section 6.3.5)
| Location | Description | Allowed Watts per m² or per lm | Area in m² (or lm for perimeter) | Allowed Watts x m² (or x lm) |
| Total Allowed Watts | ||||
Proposed Lighting Wattage (Exterior)
| Location | Fixture Description | Number of Fixtures | Watts/Fixture | Watts Proposed |
| Total Proposed Watts may not exceed Total Allowed Watts for Exterior Total Proposed Watts | ||||
Lighting & Controls Checklist
Energy Conservation Building Code 2017 Compliance Forms
| Project Address | Date | ||||||
| The following information is necessary to check a building permit application for compliance with the lighting requirements in the Energy Conservation Building Code 2017. | |||||||
| Applicability | Code Section | Component | Information Required | ||||
| Yes | No | N/A | Location on Plans | Building Department Notes | |||
| Lighting and Controls | |||||||
| Mandatory Provisions (Section 6.2) | |||||||
| 6.2.1 | Lighting Controls | ||||||
| 6.2.1.1 | Automatic shutoff | Indicate automatic shutoff locations or occupancy sensors | |||||
| 6.2.1.2 | Space control | Provide schedule with type, indicate locations | |||||
| 6.2.1.3 | Daylit Zones | Provide manual or automatic control device schedule with type and features, indicate locations | |||||
| 6.2.1.4 | Centralized Controls_ECBC+ and SuperECBC Buildings | Provide centralized control system schedule with type and features, indicate locations | |||||
| 6.2.1.5 | Ext. lighting control | Indicate photosensor or astronomical time switch | |||||
| 6.2.1.6 | Additional control | Provide schedule with type, indicate locations | |||||
| 6.2.3 | Exit signs | Indicate wattage per face of Exit signs | |||||
| Prescriptive Interior Lighting Power Compliance Option (Section 6.3) | |||||||
| 6.3 | LPD compliance | Indicate whether project is complying with the Building Area Method (6.3.2) or the Space Function Method (6.3.3) | |||||
| 6.3.2 | Building area method | Provide lighting schedule with wattage of lamp and ballast and number of fixtures. Document all exceptions. | |||||
| 6.3.2 | Space function method | Provide lighting schedule with wattage of lamp and ballast and number of fixtures. Document all exceptions. | |||||
| 6.3.3 | Luminaire wattage | ||||||
Lighting & Controls Checklist
Energy Conservation Building Code 2017 Compliance Forms
| Project Address | Date | ||||||
| The following information is necessary to check a building permit application for compliance with the lighting requirements in the Energy Conservation Building Code 2017. | |||||||
| Applicability | Code Section | Component | Information Required | Location on Plans | Building Department Notes | ||
| s e Y | o N | A/N | |||||
| Lighting and Controls | |||||||
| Mandatory Provisions (Section 6.2) | |||||||
| 6.2.1 | Lighting Controls | ||||||
| 6.2.1.1 | Automatic shutoff | Indicate automatic shutoff locations or occupancy sensors | |||||
| 6.2.1.2 | Space control | Provide schedule with type, indicate locations | |||||
| 6.2.1.3 | Daylit Zones | Provide manual or automatic control device schedule with type and features, indicate locations | |||||
| 6.2.1.4 | CentralizedControls_ECBC+ and SuperECBC Buildings | Provide centralized control system schedule with type and features, indicate locations | |||||
| 6.2.1.5 | Ext. lighting control | Indicate photosensor or astronomical time switch | |||||
| 6.2.1.6 | Additional control | Provide schedule with type, indicate locations | |||||
| 6.2.3 | Exit signs | Indicate wattage per face of Exit signs | |||||
| Prescriptive Interior Lighting Power Compliance Option (Section 6.3) | |||||||
| 6.3 | LPD compliance | Indicate whether project is complying with the Building Area Method (6.3.2) or the Space Function Method (6.3.3) | |||||
| 6.3.2 | Building area method | Provide lighting schedule with wattage of lamp and ballast and number of fixtures. Document all exceptions. | |||||
| 6.3.2 | Space function method | Provide lighting schedule with wattage of lamp and ballast and number of fixtures. Document all exceptions. | |||||
| 6.3.3 | Luminaire wattage | ||||||
| Analysis | Software |
|---|---|
| Whole Building Performance Method | AECOsim Design Builder DOE2EnergyPlus eQUEST HAP IDA-ICE IES-VE OpenStudio SimergyTrace700TRNSYS Visual DOE |
| Daylighting | AGI32 (Licaso) Daysim Design Builder DIVA Groundhog IES-VE OpenStudio Radiance-Rhino-Grasshopper with Daylighting Plugins Sefaira Sensor Placement + Optimization Tool (SPOT) |
14. APPENDIX E: BEE APPROVED LIST OF SOFTWARE TO SHOW COMPLIANCE5
Table 14-1 Bureau of Energy Efficiency Approved Software for Demonstrating Compliance with ECBC
5This is not an all-inclusive list. The current list of approved software is available at BEE website (https://www.beeindia.gov.in/).
15. REFERENCES
Grondzik, Walter T., Alison G. Kwok, Benjamin Stein, and John S. Reynolds. 2010. Mechanical and Electrical Equipment for Buildings. 11 edition. Wiley.
90.1 User’s Manual: ANSI/ASHRAE/IESNA Standard 90.1-2007. 2008. American Society of Heating, Refrigerating & Air-Conditioning Engineers, Incorporated
“Building Science Corporation | Consulting & Architecture.”. https://buildingscience.com/.
