Capacitors are added to the electrical network which compensate for the reactive power demand of the inductive load and thus reduce the burden on the supply.
Capacitors store power like batteries. The fundamental difference between the two is that a capacitor can discharge energy rapidly in a few seconds while a battery might take some time few minutes. Thus, it provides instant supply of energy in no time.
The reactive power is provided by the capacitor or bank of capacitors installed parallel to the load. Capacitors contained in most power factor correction equipment draw current that leads the voltage, thus producing a leading power factor. Typically the corrected power factor will be 0.92 to 0.95.
Synchronous condenser
They are 3 phase synchronous motors with no load attached to its shaft. The synchronous motor has the characteristics of operating under any power factor leading, lagging or unity depending upon the excitation. For inductive
loads, the synchronous condenser is connected towards load side and is overexcited. This makes it behave like a capacitor. It draws the lagging current from the supply or supplies the reactive power
Benefits of improved power factor
Reduction of power consumption due to improved energy efficiency.
Reduction of electricity bills
Extra kVA available from the existing supply
Reduction of I2R losses in transformers and distribution equipment
Reduction of voltage drop in long cables.
Extended equipment life Reduced electrical burden on cables and electrical components.