In a series circuit, the elements are connected one after another, i.e. in series (Figure 7.11). Which means the voltage and resistances add up. In a series arrangement, the current is the same in all parts of the circuit because electrons are moving in a single loop. Whereas, voltage could be different across resistances.

Figure 7.11 Series circuit arrangement
For the circuit shown in Figure 7.11, total resistance will be R1+ R2 and total voltage will be V1+V2. The wire itself also offers some resistance, but that is usually very small compared to the resistance by the load. Hence it is not included in calculations.
All components in a series circuit should function for the circuit to be complete. Series circuit find limited application in buildings, because failure of any one load (such as burned out lamp) will break the circuit resulting in a power shut down to the remaining loads.