It is important for users of the WBP Method, as well as the owners of the proposed buildings, to understand the intent and limitations of the WBP
Method. It is intended to provide a fair method of comparison between the estimated annual energy consumption of the Proposed Design and the Standard Design for purposes of compliance with the Code. The WBP Method is not intended to provide the most accurate prediction of actual energy consumption for the building as it is actually built. Although the designer is expected to model the future use of the building as closely as possible, there are many reasons why the actual building performance may differ from the design energy consumption. These include:
• Variations in Operation and Occupancy: The actual schedules of operation and occupancy may differ from those assumed in the WBP analysis.
Variations in Control and Maintenance: The building’s energy systems may be controlled differently than assumed; the equipment may not be set up or maintained properly.
• Variations in Weather: The simulation runs use weather data that may not match the actual weather conditions; further, there is variability in weather conditions from year-to-year.
Energy Uses not Included: The WBP method under certain conditions, may not require all building energy uses to be included in calculating the design energy consumption. Sometimes, there is additional energy-using equipment that is added to a building after it is built.
Precision of the Simulation Program: Even the most sophisticated simulation programs approximate the actual energy flows and consumption in a building; further, the energy analyst will usually make simplifying assumptions. Both can be sources of error in the predictions of energy consumption.
Calculating Energy Consumption of Proposed Design and Standard Design
Energy Simulation Model
The simulation model for calculating the Proposed Design and the Standard Design shall be developed in accordance with the requirements in Error! Reference source not found.. The Standard Design is based on the mandatory and prescriptive requirements of the ECBC compliant building. The Standard Design will be the same for all compliance levels (ECBC, ECBC+, Super ECBC).