Nagpur district is endowed with several mineral resources which can enable investments in mineral based industries within the region.
2 The production has been worked out based on average yield of 10 kg/hectares which has been derived from various sources of information like District Statistical Abstract of various years, District Industrial Potential Survey and Research documents available on internet
3 This section draws from the District industrial Potential Survey Report of 2009-10 prepared by the Micro, Small and Medium Enterprise Development Institute, Nagpur
5-6
Maharashtra is the second largest producer of manganese ore after Orissa. The principal mineral-bearing belts in Maharashtra are Vidarbha area in the east and Konkan area in the west. Important mineral occurrences in the Nagpur district are china clay, chromite, coal, dolomite, fireclay, kyanite, limestone, manganese ore, quartz & silica sand, quartzite, copper, gold, granite, lead-zinc and tungsten, marble, ochre.Based on the analysis of the data available from Indian Bureau of Mines, coal deposits in Maharashtra are as:
| Place | Total Deposits (in million tonnes) | Percentage |
|---|---|---|
| India | 264,535.06 | 100.0% |
| Maharashtra | 10,154.74 | 3.8% |
| Wardha Valley | 6,003.49 | 59.1% |
| Kamptee | 2,860.81 | 28.2% |
| Umred | 308.41 | 3.0% |
| Nand Bander | 952.03 | 9.4% |
| Bokhara | 30.00 | 0.3% |
Source: State review, indian mineral year book, 2009, Indian Bureau of Mines
As is evident, there is abundant coal reserves in tehsils covered in NMA. The abundant availability of coal in the region has acted as a catalyst for power sector investments in the region. Coal is a key input in power production and the easy availability has meant that Vidarbha region now has power sector commitments which will potentially result in the region becoming a power surplus hub over the next few years are as:
| Place | Total Deposits (in million tonnes) | Percentage |
|---|---|---|
| Maharashtra | 239.00 | 100% |
| Vidarbha | 181.00 | 76% |
| Sindhudurg | 36.66 | 15% |
| Gadchiroli | 138.00 | 58% |
| Chandrapur | 0.40 | 0% |
| Satara | 6.23 | 3% |
Source: State review, Indian mineral year book, 2009, Indian Bureau of Mines
Typically, to produce 1 metric tonnes of steel, iron ore requirement is 2.25 metric tonnes. Given that the region has a deposit of roughly 180 million tonnes of iron ore, the potential steel generation can be to the tune of 80 million tonnes. One million tonnes per annum steel plant employs an average of 6,500 persons. Thus, the potential employment generation due to iron ore deposits is quite substantial.
| Place | Total Deposits (in million tonnes) | Percentage |
|---|---|---|
| India | 175,345 | 100% |
| Maharashtra | 1,737 | 1.0% |
| Vidarbha | 1,737 |
Source: State review, Indian mineral year book, 2009, Indian Bureau of Mines
5-7
Limestone is typically used for cement manufacturing. According to the estimates of the Vidarbha Industries Association4, of the total reserves of limestone in Nagpur only 40 percent to 50 percent have been utilized so far. The limestone found in Nagpur/Vidarbha is cement grade and hence presents potential for development of cement producing industries. Already, several cement plants are functioning in the region.