Solar PV power generating systems are classified as follows.
3.1 Standalone PV System — Standalone PV System is an independent power producing system that is not connected to electric power utility. PV array d.c. input is converted to a.c. by standalone inverter. Charge controller for battery backup may be separate or built-in with inverter. Electrical loads may be d.c. and/or a.c.
3.2 Utility Connected PV System — Utility/grid connected PV system is a power producing system that is connected with electric power utility. PV array d.c. input is converted to a.c. by grid-tied inverter. MPP tracker is built-in with inverter. Battery backup may or may not be provided. Utility connected PV system supplies captive load and feeds excess power to utility by default, may be configured to supply captive load only using reverse power control. The reverse power control is also required when system output is connected to DG set in the event LT distribution grid is not available.
Refer Fig. 1 for grid connected distributed rooftop PV power plant blocks.
Refer Fig. 2 for grid connected central PV power plant blocks.
3.3 Hybrid PV System — Hybrid PV System is an independent power producing system (from solar PV and/or wind and/or other RE power sources) that is connected with electric power utility and/or DG. Hybrid PCE converts PV array d.c. input to a.c. and has built-in charge controller for battery pack. PV array, battery pack, utility grid and DG are input sources to hybrid PCE and a.c. electrical loads are supplied by hybrid PCE output.
3.4 Building Integrated Photo Voltaic (BIPV) System — BIPV System is a power producing system integrated with building that may or may not be connected with electric power utility. BIPV system may be Standalone, Utility Connected or Hybrid PV system.
Any of these systems may be with or without electrical energy storage such as batteries.
NOTE — The term ‘utility’ is also referred to as the ‘grid’.