Outdoor installations of the permanent nature require special treatment as compared to temporary installations of short durations (less than 6 months) primarily owing to the continuous exposure of the former installation and equipment forming part of it, to heavy conditions of service at site. The design and selection of equipment and components must take into consideration the expected loading, operating characteristics, and cycle duty, as well as the special and arduous environmental, operational, transportation and storage conditions.
This Part and Section of the Code attempts to cover the general requirements applicable to equipment and auxiliaries for a variety of permanent outdoor site installations which are enumerated in 4. It is intended to provide necessary guidelines for such installations in this Section for the purposes of the practicing engineers and the relevant authorities.
The general characteristics of permanent outdoor installations are enumerated in 5. The object of this Section is to set out the guiding principles to ensure the safety of persons, livestock, property, and the proper functioning.
In the preparation of this Section, considerable assistance has been derived from IEC 60621: 1987 ‘Electrical installations for outdoor sites under heavy conditions including open-cast mines and quarries’, issued by the International Electrotechnical Commission.
1 SCOPE
1.1 This section of this Code (Part 5/Sec 3) covers requirements for permanent outdoor installations, for operations of equipment and machinery therein used for the purposes, such as:
a) Winning, stacking and primary processing;
b) Secondary processing;
c) Transport conveying;
d) Associated pumping and water supply systems;
e) Haulage trucks;
f) Power generating and distribution systems;
g) Control, signal supervisory and communication system; and
h) Ancillaries.
1.2 This Section does not cover temporary and provisional places of work of durations less than 6 months for which reference shall be made to Part 5/Sec 2 of this Code.
NOTE — However, this Section shall be applicable to building sites and earth-moving sites as far as the equipment used therein are like those used in surface mining application.
2 REFERENCES
IS No. Title
1255 : 1983 Code of practice for installation and maintenance of power cables up to and including 33 kV (second revision)
10028 (Part 2) : 1981 Code of practice for selection, installation, and maintenance of transformers: Part 2 Installation
IS/IEC 60309-1 : 2002 Plugs, socket-outlets and couplers for Industrial purposes: Part 1 General requirements (first revision)
IS/IEC 60309-2 : 2002 Plugs, socket-outlets and couplers for Industrial purposes: Part 2 Dimensional interchangeability requirements for pin and contact-tube accessories (first revision)
IS/IEC 60947-1 : 2007 Low voltage switchgear and control gear: Part 1 General rules (first revision)
SP 30 : 2023
3 TERMINOLOGY
For the purpose of this Section, the definitions given in Part 1 along with the following shall apply:
3.1 Operations (Electrical) — The process of performing work through the controlled application of electrical power. This process includes:
a) Operating — Which means, switching, adjusting, controlling and supervision, and
b) Servicing — which means maintenance, alterations, removal of faults and testing.
3.2 Operating Area — An area accessible to operating personnel in the normal performance of their duties.
3.3 Electrical Operating Area — An area accessible only by the opening of a door or the removal of a barrier. The area shall be clearly and visibly marked by appropriate signs.
3.4 Closed Electrical Operating Area — An area accessible only through the use of a tool or key the area shall be clearly and visibly marked by appropriate signs.
3.5 Working Level (Bench) — That part of an open-cut mine or quarry on which machinery and/or rolling stock are in operation. The working level and/or working area may change location with the progress of operations.
3.6 Winning and Stacking Machinery — Winning and stacking machines are used in the process of uncovering or detaching materials from the earth’s surface or stacking such material. These machines are designed to be able to change location according to operational requirements. They include the following:
a) Excavators, namely: bucket-wheel excavators, bucket-chain excavators, draglines, shovels and other excavators, reclaimers, ditch bunker loaders, etc.;
b) Spreaders and stackers;
c) Mobile conveyor bridges;
d) Mobile conveyors, including tripper carriages;
e) Loading stations, including hoppers and surge bins;
f) Floating dredgers; and
g) Mobile electric drills.
3.7 Transport Conveying System — A movable or stationary mechanical item of plant designed for the conveying of materials continuously from one location to another.
They include the following:
a) Belt conveyors,
b) Chain conveyors,
c) Bucket conveyors,
d) Paddle or scraper conveyors,
e) Screw conveyors, and
f) Hydraulic conveyors systems.
3.8 Primary Processing Machinery — Any machinery necessary to prepare material won from the earth prior to its transport to the final processing or utilization areas.
3.9 Secondary Processing Machinery — Any machinery necessary to process at a point remote from the open cut or quarry, material won from the earth.
3.10 Fixed Apparatus — An apparatus or assembly of apparatus which is permanently installed in a determined place and which is not normally moved during or between periods of use.
3.11 Portable Apparatus — An apparatus or assembly of apparatus intended to be normally held in the hand during use and which can be carried by a person.
4 TYPES OF PERMANENT OUTDOOR INSTALLATIONS
The types of permanent outdoor installations covered by this Section are given in 4.1. The general characteristics and service conditions enumerated in 5.1 cannot be made uniformly applicable to all such installations. Depending on the site conditions and the nature of the operation involved, a judicious estimate must be made of the environmental factors that influence the performance of the installation.
4.1 The following are the types of permanent outdoor installations covered by this Section:
a) Open-cut or open-cast mine — An open-air site for the extraction of materials or minerals, such as coal, bauxite, iron-ore, etc.
NOTE — Underground mines are excluded from the scope of this Section. However, surface installations of underground mines are covered by this Section, to the extent that the operations therein are identical with those described in 1.1.
SP 30 : 2023
b) Quarry — An open-air site for the extraction of materials such as limestone, gravel, clay, etc.
c) Dockyards — Includes loading and unloading areas, container terminal, railway yards, repair docks, passenger berths, jetty is, etc.
d) Airport aprons — A defined area on a land aerodrome, intended to accommodate aircraft for the purposes of loading and unloading passengers, mail or cargo, refuelling parking, or maintenance.
e) Railway marshalling yards — A yard with facilities for receiving classifying and dispatching railway rolling stock.
5 GENERAL CHARACTERISTICS OF PERMANENT OUTDOOR INSTALLATIONS
The design and the selection of components shall be based on expected loading, operating characteristics and cyclic duty taking into consideration the protection required in special and arduous environmental, operational, transportation and storage conditions.
5.1 Some of these conditions, are listed below which may differ from their normal values:
a) Altitude;
b) Low and/or high ambient temperature;
c) Supply voltage variations;
d) Supply frequency variations;
e) Insecure power supply and transients;
f) High or low humidity;
g) Environment (dust, wind pressure, marine atmosphere, etc.);
h) Flammable and/or explosive material/or atmosphere;
j) Vermin, including rodents or other small animals;
k) Localities prone to natural calamities; and
m) Ecological impact.
6 RULES FOR EQUIPMENT AND AUXILIARIES