This Part 2 of the National Electrical Code of India is primarily intended to cover the requirements relating to stand-by generating stations and captive substations. Standby generating sets are generally the standby power supply source and play an important role in preserving property and lives in emergencies. Captive sub stations are intended for serving an individual occupancy. The general provisions relating to such installations are common and are detailed elaborately in this part of the code.
Generating stations covered by this Part 2 are the stand-by or emergency supply and captive substations normally housed in or around the building in question. This Code does not include the switching stations and other large generating plants that come solely under the preview of the relevant electric supply authorities even though to some extent the requirements stipulated herein could also be applicable to them.
Specific requirements if any, for generating and switching substations for individual buildings that might vary depending on the nature of the occupancy or the size of the building are enumerated in the respective sections of the Code.
387
In the formulation of this Code, note has been taken of the requirements stipulated in installation Codes of individual equipment as well as the fire-safety Codes for generating stations and substations. It is generally not feasible to draw very strict guidelines for the design and layout for such installations owing to the complexity of the needs of building installations and hence only the essential safety considerations are listed out for compliance. It is essential to take recourse to the assistance of local authorities for further details.
Specific requirements pertaining to stand-by generating stations and captive substations for multistoried buildings are covered in Part 3/Section 22 of this Code.
Electrical Installation of Stand-by Generating Stations
This section of National Electrical Code of India (Part 2/Sec 1) is intended to cover requirements relating to the Installation of Generating Set(s) primarily used as a standby source of electrical supply. To ensure optimum performance, installation of generating sets also require specialised engineering knowledge and experience in relation with prime mover. The electrical supply from standby generating sets is of prime importance for the life safety and emergency services in all types of buildings having different utilities and especially in multi-storeyed buildings. It is also used in IT centres, industries with continuous process to minimise economic losses, avoid equipment damage due to supply interruptions. Installation of generating sets requires compliances of norms of Central Pollution Control Board related to Environmental aspects and CEA Regulations related to Safety.