This section of the code (Part 1/Sec 1) describes the scope of the National Electrical Code of India.
The National Electrical Code of India takes into account the stipulations in several Indian Standards dealing with the various aspects related to electrical installation practices. Several product standards also exist, and compliance with relevant Indian Standards is desirable. It is therefore recommended that individual Parts/Sections of the Code should be read in conjunction with the relevant Indian Standards. List of such Indian Standards is given at relevant Part/Section of the Code.
At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards.
Electricity has become an integral and inevitable part of everyone’s life. The progress and technological advancement of modern society depends on electricity. However it is important to remember that, if electrical installations are not handled according to relevant guidelines, it could be harmful. Therefore, electrical installations require adequate planning right from concept stage to layout and designing, selection of proper equipment, their installation and their maintenance. Fundamental aspects of installation practice are common for most of the types of electrical installations. Part 1 of the National Electrical Code of India covers these aspects under its various Sections.
There are several Indian Standards existing on different aspects of electrical installation practice. An attempt has been made through this Code to refer to the present good practices and guidelines. A reference has also been made to product standards in order to inform the user of the Code about the availability and desirability to use them.
Aspects concerning specific occupancies are covered in other Parts and Sections of this Code. The fundamental principles of installation practice covered under Part 1 of this Code generally apply, unless modified or supplemented by subsequent Parts. This Part 1 would also be a useful reference for occupancies not explicitly covered by the scope of subsequent Parts of the Code.
Scope of the National Electrical Code of India
Each Part/Section of the National Electrical Code of India covers the requirements related to electrical installations in specific occupancies. The fundamental and general principles governing electrical installation practice together with common aspects applicable to all types of installations has been brought out in a separate Part in order to serve as a reference document.
Effort has been made to make this part self-contained, so that users of the Code can derive utmost advantage in using it for application in the field even for occupancies not explicitly covered by the scope of subsequent Parts of the Code. Efforts have also been made to ensure that all the relevant details required for the understanding of the Code are available to the extent possible within Part 1 and effort has been made to keep the references of individual standards to the minimum.
The details enumerated in this Part are generally applicable to all types of occupancies and are to be read as modified or supplemented with the information provided in the relevant Parts of the Code.
a) Standard good practices for selection of various items of electrical equipment forming part of electrical installation;
b) Recommendations concerning safety and quality of the wiring in electrical installations of buildings or industrial structures, promoting compatibility between such recommendations and those concerning the equipment installed;
c) General safety procedures and practices in electrical work; and
d) Additional precautions to be taken for use of electrical equipment for special environmental conditions like explosive and active atmosphere.
3.2 The Code applies to electrical installations, such as those in:
a) Standby/emergency generating plants and building substations;
b) Domestic dwellings;
c) Office buildings, shopping and commercial centres and institutions;
d) Recreation and other public premises;
e) Medical locations;
f) Hotels;
g) Swimming pools;
h) Rooms containing sauna heaters;
j) Multi-storied buildings;
k) Supplies for electrical vehicles;
SP 30 : 2023
m) Sports buildings;
n) Industrial and non-industrial premises;
p) Temporary and permanent outdoor installations;
q) Agricultural premises;
r) Installations in hazardous areas; and
s) Solar photovoltaic installations.
NOTES
1 Any type of installation not covered by the above shall be classified in the group which most nearly resemble its existing or proposed use.
2 Where change in the occupancy places it under the scope of a different Section of the Code, the same installation shall be made to comply with the requirements of the Code for the new occupancy.
3 While numbering above items, ‘i’ and ‘o’ are avoided to avoid confusion with numerals ‘1’ and ‘0’.
3.3 The Code applies to circuits other than the internal wiring of apparatus.
3.4 The Code does not apply to traction, motor vehicles and installations in rolling-stock, on board-ships, aircraft or installations in underground mines.
3.5 The Code covers only electrical aspects of lightning protection of buildings.
3.6 The Code is also not intended to apply to:
a) Systems of distribution of energy to public; and
b) Power generation and transmission for such systems.
3.7 The Code also does not cover guidelines on the payment for electrical work done in installations.
4 Central Electricity Authority Regulations under regulation 12 (2) of Central electricity authority (Measures relating to safety and electric supply) Regulations, 2010 recommends the National Electrical code of India as a code to be followed.
NOTE — In the event of any inconsistency, the provisions of the regulations shall prevail.