3.1.1 Arc — Luminous discharge of electricity across an insulating medium, usually, accompanied by the partial volatilization of the electrodes.
NOTE — A complete sinusoidal current half cycle is not considered to be an arcing half cycle.
3.1.2 Capacitor — Two terminal devices characterized, essentially, by its capacitance.
3.1.3 Conductor — Conductive part intendent to carry electric current.
3.1.4 Connection of Circuits
3.1.4.1 Series — Connections of two terminal networks so that they form a single path for current.
NOTE — An example of a series connection is series resonant circuit.
NOTE — All two terminal networks in a series connection carry the same current.
3.1.4.2 Parallel — Connections of two terminal networks so that they are connected to a common terminal pair. NOTES
1 An example of a parallel connection is parallel resonant circuit.
2 Same voltage is applied to all two terminal networks in a parallel connection.
3.1.5 Series Parallel — Series parallel connection (related to cells or batteries): Arrangement of cells or batteries wherein in series connected cells or batteries are connected in parallel.
3.1.6 Dielectric — A material medium in which an electric field can exist in a stationary state.
3.1.7 Earth Fault— Occurrence of an accidental conductive path between a live conductor and the earth or exposed conductive part of a protective conductor.
NOTES
1 The conductive path can pass through a faulty insulation, through structures (for example, poles scaffoldings, cranes, ladders) or through vegetation (for example, Tree, bushes) and can have a significant impedance.
2 Earth fault with negligible fault impedance in solidly earthed neutral system or in a low impedance earthed neutral system are also named line - to - earth short – circuits.
3.1.8 Earth Leakage Current — Current which flows to earth or to extraneous conductive parts in a circuit which is electrically sound.
3.1.9 Electric Circuit (or Circuit) — An assembly of electrical equipment supplied from the same origin and protected against over current by the same protective devices. Certain types of circuits are categorized as follows:
NOTE — Electric circuit is also defined as circuit consisting of electric circuit elements only.
a) Category 1 Circuit — Circuit (other than a fire alarm or emergency lighting circuit) operating at low voltage and supplied directly from a mains supply system.
b) Category 2 Circuit — With the exception of fire alarm and emergency lighting circuits, any circuit for telecommunication (for example, radio, telephone, sound distribution, intruder alarm, bell, call and data transmission circuits) which is supplied from a safety source.
c) Category 3 Circuit — A fire alarm circuit or an emergency lighting circuit.
3.1.10 Electric Current — Scalar quantity equal to the flux of the electric current density J through a given directed surface
S:I=∫SJ·endA
where e dA is the vector surface element
NOTES
1 The electric current through a surface is equal to the limit of the quotient of the electric charge transferred through that surface during a time interval by the duration of this interval when this duration tends to zero.
2 For charge carriers confined to a surface, the electric current is defined through a curve of this surface (see the note to term “lineic electric current”).
3.1.11 Electrode — Conductive part in electric contact with a medium of lower conductivity and intended to perform one or more of the functions of emitting charge carriers to or receiving charge carriers from that medium or to establish an electric field in that medium.
3.1.12 Functional Extra-low Voltage (FELV) — extra-low voltage system in which not all of the protective measures required for SELV or PELV have been applied.
3.1.13 Flashover — Electrical breakdown between conductors in air, a gas or a liquid or in vacuum, at-least partly, along the surface of a solid insulation.
3.1.14 Insulation Fault — in the insulation of an equipment, wire or cable which can result either in an abnormal electric current through this insulation or in a disruptive discharge.
3.1.15 Overload — Operating conditions in an electrically undamaged circuit which causes an overcurrent.
3.1.16 PELV (Protective Extra-low Voltage) — extra-low voltage system which is not electrically separated from earth, but which otherwise satisfies all the requirements for SELV.
3.1.17 SELV (Separated Extra Low-Voltage) — An extra low-voltage system which is electrically separated from earth and from other system in such a way that a single fault cannot give rise to the risk of electric shock.
7
3.1.18 Short-circuit — Accidental or intentional conductive path between two or more conductive parts forcing the electric potential differences between these conductive parts to be equal to or close to zero.
3.1.19 Spark — Small luminous electric arc of short duration.
3.1.20 Voltage, Potential Difference — The line of integral from one point to another of an electric field, taken along a given path.
3.1.21 Voltage Classifications — Nomenclature of commonly used short names of voltages
3.1.23.1 ELV (extra low voltage) — A system with a nominal voltage Un ≤ 50 V a.c. or ≤ 120 V d.c.;
3.1.23.2 LV (low voltage) — A system with a nominal voltage Un ≤ 1 000 V a.c. and ≤ 1 500 V d.c.
3.1.23.3 MV (medium voltage) — A system with a nominal rms voltage is 1 kW < U n ≤ 33 kW
3.1.23.4 HV (high voltage) — A system with a nominal rms voltage is 3 3 < U n ≤ 1 5 0 k V .
3.1.23.5 EHV (extra high voltage) — A system with a nominal rms voltage is > 150 kV. NOTES
1 The above nomenclatures are adopted from IS 17036 and IS 732 for the purpose of this code.