8.1 Sound System
Sound system is used for public announcement/address, entertainment, alerts, crowd, visitors, vehicle management. It is an important tool in emergency situation/disaster management. It comprises one or more basic components
SP 30 : 2023
from following:
a) Speaker (indoor/outdoor),
b) Amplifier,
c) Mixer,
d) Microphone,
e) Microphone cables, or
f) Speaker cables.
8.2 Conference System (Audio)
Usually installed in meeting halls, it comprises a set of microphones, speakers, controller unit and optional amplifier for external speakers. Microphones/delegate units are installed on meeting table. They have individual on/off control which a person using it is supposed to operate. There is also chairman unit with master control which can disable delegate units speakers, may be integral part or installed separately. Different components of system are interconnected by copper cables of high purity to minimize drop. Microphones are generally looped. For convenience and redundancy microphones may be grouped to form number of loops and connected to controller. For audience, additional separate speakers may be connected through amplifier.
8.3 Audio-Video or Audio-Visual (AV) System
Installation of audio visual system may be done for entertainment, public announcement, board meetings, presentations, video conference/web meeting. Basic components used are speakers, microphones, DVD players, video camera, electronic video screen or video projector and wall/screen. Display units may be single or multiple located at different locations. It may have recording facility.
8.4 Design and Layouts
Design and layouts of system shall be pre-planned with the help of experts. Acoustical requirements if any shall be checked and met with. If the number of the equipment is large, they shall be mounted on racks of suitable dimensions of metal or wood, in such a manner that the controls are within easy reach. The patch cords shall be neatly arranged. For outdoor installations, the line-matching transformers shall be mounted in weather-proof junction boxes. In large open grounds such as an outdoor stadium, care shall be taken to ensure that the sound heard from different loudspeakers do not have any noticeable time lag.
NOTE — Many times requirement of system is not envisaged/considered at initial stage. Under circumstances anticipatory provision for cabling between possible/planned locations of equipment and provision of power outlets shall be made. This helps avoid breakages especially in case of concealed wiring
8.5 Electrical Aspects
8.5.1 Cabling Material
Special types of copper cables shielded, braided, tinned, flat, twisted, coaxial, recommended by system designer, suitable for particular task and application with high purity shall be used.
8.5.2 Installation
Cables shall be enclosed in separate and independent conduits/trunking for each system or shall be installed 200 mm away from power cables/or as specified by system provider. Crossings shall be done in right angle. Terminations shall be proper and rigid as per recommended method prescribed by equipment manufacturer. The positioning of equipment shall be such that the lengths of the interconnecting cables is kept to the minimum to avoid drops losses in transmission.
8.5.3 Electric Supply
Electric supply shall be provided at amplifier/control equipment rack of audio system, through power outlet with efficient earth terminal. Supply shall be stable without voltage fluctuations, UPS/battery based supply may be used considering sensitive electronic equipment. This battery based supply is also necessary where any interruption is not desirable. Use of SPD may be made to prevent equipment damage from possible voltage surge. For video system separate power supply outlets close to display units electronic screen/video projector will be necessary.
8.6 For guidance on selection of equipment of public address system and their installation and maintenance, reference shall be made to IS 1881 and IS 1882.