This Code (Part 10/Section 1) covers requirements of landscape planning, design and development with the view to promoting quality of outdoor built and natural environments and the protection of land and its resources.
For the purpose of this Section, the following definitions shall apply.
2.1 Avenue — A wide road or pathway lined with trees on either side.
2.2 Buffer — The use of landscape elements to reduce or curtail view, sound or dust with plants or earth berms, wall etc.
2.3 Canopy/Tree canopy — The average horizontal spread of the tree, taken from dripline to dripline.
2.4 Climber — A woody or herbaceous plant which either clings to a wall, trellis or other structures or can be supported or trained as it grows.
NOTE — It is sometimes also called creeper or vine.
2.5 Columnar — A slender, upright plant form.
2.6 Contour — The form of the land, existing or proposed; a part of the topography, indicated by map lines at intervals, to understand the landform clearly. The contour line is imaginary and indicates continuous elevation above mean sea level or an assumed datum line.
2.7 Contour Interval — The difference in elevation or the vertical distance measured between consecutive contour lines.
2.8 Drainage — Drainage is the natural or artificial removal of surface and subsurface water from an area through use of vegetated/open channel, pipes, drain boards, chambers, etc.
2.9 Egress — A way out, or exit.
2.10 Elevation — A contour line or notation of relative altitude with respect to a benchmark, useful in plotting existing or proposed feature.
2.11 Erosion — Wearing away of soils, rocks, sediments, etc, by gradual action of natural processes (such as water, wind and glacier).
2.12 Exotic — A plant that is not native to the area in which it is planted.
2.13 Fence — A barrier of plant or construction material used to define the boundary of an area and to restrict visual and/or physical access.
2.14 Foliage — The collective leaves of a plant or plants.
2.15 Geogrid — A deformed or non-deformed netlike polymeric material used with foundation, soil, rock, earth, or any other geotechnical engineering-related material as an integral part of the human made project structure or system.
2.16 Geo-Textile — Any permeable textile or fabric (natural or synthetic) used to retain or protect soil and filter and drain water as an integral part of project, structure or system such as terrace garden, etc.
2.17 Girth of Tree — Girth is a measurement of the circumference of the trunk of a tree, measured perpendicular to the axis of the trunk. It is measured at breast height (1.4 m above ground level).
2.18 Grade — The slope or lay of the land as indicated by a related series of elevations.
2.18.1 Natural Grade — Grade consisting of contours of unmodified natural landform.
2.18.2 Finished Grade — Grade accomplished after landscape features are installed and completed as shown on plan as proposed contours or spot levels.
2.19 Gradient — The degree of slope of a pipe invert or road or land surface. The gradient is a measure of the slope height as related to the length. The slope is expressed in terms of percentage or ratio.
2.20 Grading — The cutting and/or filling of earth to establish finished contours.
NOTE — Grading facilitates good drainage and shapes land to suit the intent.
2.21 Grasses — Plants that characteristically have joint stems, sheaths and narrow blades (leaves).
2.22 Grass Paver — Grass paver is a permeable structural grid cellular system (concrete, HDPE or any other polymer) for containing and stabilizing gravel or turf.
2.23 Green Roof — A roof surface of a building that is partially or completely covered with a growing medium and vegetation. Green roofs can be deep (intensive) or shallow (extensive).
NOTE — Intensive green roofs are elevated greens which can sustain shrubs, trees, walkways and benches with their complex structural support, irrigation, drainage and root protection layers. Extensive green roofs are shallow, relatively light and are solely used for their environmental benefits. They support native ground cover that requires little maintenance.
2.24 Green Walls — A supporting structure completely or partially covered with vegetation which is grown with soil or growing medium. It can be either free standing or part of a structure. They include climbing plants such as vines that grow directly on the wall, or walls that comprise of modular panels, containers and an integrated irrigation system.
2.25 Ground Cover — The planting material that forms a carpet of low height.
2.26 Hard Landscape — Civil work component of landscape development such as pavements, walkways, roads, retaining walls, sculptures, street amenities, fountains and other elements of the built environment.
2.27 Hardy Plant — Plants that can withstand harsh temperature variations, harsh wind, pollution, dust, extreme soil conditions, and can tolerate either drought or flooding.
2.28 Heat Island Effect — A phenomenon in which air and surface temperature of an area are higher than nearby areas due to the replacement of natural land cover with pavement, building, and other infrastructure.
2.29 Hedge — Shrubs or trees (usually of the same species) planted closely together in a linear configuration. A hedge may be pruned to shape or allowed to grow to assume its natural shape.
2.30 Herb — A plant with a non-woody or fleshy structure. Certain herbs are highly useful for cooking or of high medicinal value.
2.31 Ingress — A way in, or entrance.
2.32 Invert — The lowest inside point of a pipe, culvert, or channel.
2.33 Irrigation — The artificial application of water, to assist in growing and maintenance of plants.
2.34 Kerb — A concrete or stone or similar hard edging along a pathway, or along a road, often constructed with a channel to guide the flow of stormwater.
2.35 Microclimate — A local atmospheric zone where the climate (temperature, humidity, wind, etc) differs from the surrounding areas. The term may refer to areas as small as a few square metres or as large as many square kilometres.
2.36 Mound — A small hill or bank of earth, developed as a characteristic feature in landscape.
2.37 Mulching — A practice of using a protective covering, usually of organic matter such as leaves, straw, placed around plants to retain moisture, improve soil conditions and prevent the growth of weeds.
2.38 Permeable Paving — Paving surfaces that reduce runoff by allowing rainwater to soak through the surface into the underlying sub-base where the water is stored temporarily before allowing it to seep into the ground or flow to the drains.
2.39 Plants — The living beings consisting of trees, shrubs, herbs, grasses, ferns, mosses, etc, typically growing in a permanent site, absorbing water and inorganic substances through their roots, and synthesizing nutrients in their leaves through the process of photosynthesis.
2.39.1 Endemic Plant — The plant which is found only in one geographic location on earth.
2.39.2 Invasive Plant — The species of plant which is not native to a specific location (an introduced species) and has a tendency to spread to a degree believed to cause damage to the environment.
2.39.3 Native Plant — A plant indigenous to a particular locale.
2.39.4 Naturalised Plant — A plant that is established as a part of the flora of a locale other than its place of origin.
2.40 Screen — A vegetative or constructed hedge or fence used to block wind, undesirable views, noise, glare and the like, as part of in landscape design; also known as ‘screen planting’ and ‘buffer plantation’ (see also 2.2).
2.41 Sediment — The product of erosion processes; the solid material, both mineral and organic, that is in suspension, is being transported or has been moved from its site of origin by air, water, gravity or ice.
2.42 Shelterbelt — Shelterbelt is usually made up of one or more rows of trees or shrubs planted in such a manner so as to provide shelter from wind, and protect soil.
2.43 Shrub — A woody plant of low to medium height, deciduous or evergreen, generally having many stems.
2.44 Soft Landscape — The natural elements in landscape design, such as plant materials and the soil itself.
2.45 Spot Elevation — In surveying and contour layout, an existing or proposed elevation of a specific point noted as a dot on the plan.
2.46 Street/Outdoor Furniture — Items of furnishing in outdoor landscape such as benches, trash receptacle signage, play equipment.
NATIONAL BUILDING CODE OF INDIA 2016
2.47 Swale — A linear wide and shallow depression used to temporarily store, route or filter runoff. A swale may be grassed or lined.
2.48 Topsoil — The uppermost layer of the soil.
2.49 Transplanting — Technique of moving a plant from the place where it is growing and replanting at another location.
2.50 Tree — A woody plant, generally taller than 2.00 m, with a well-distinguished trunk or trunks below the leaf crown.
2.50.1 Deciduous Tree — Tree that sheds all its leaves during a part of the year.
2.50.2 Evergreen Tree — Tree that remains green for most part of the year and sheds leave slowly throughout the year.
2.51 Tree Drip Line — The branch spread of a tree defined by the outermost circumference of a tree canopy where water drips onto the ground.
2.52 Tree Grate — A grille, installed at the base of a tree otherwise surrounded by pavement that allows the free passage of air, water, and nutrients to the tree root, but does not interfere with the foot traffic.
2.53 Tree/Plant Guard — The protection around a tree or plant to help prevent damage.
2.54 Xeriscape — A landscape that requires little or no irrigation or other maintenance.
BUREAU OF INDIAN STANDARDS
look Supply Bureau Under the License from BIS for LARSEN AND TOUBRO CONSTRUCTION - MANAPAKKAM, CHENNAI ON 17-03-2017 09:00:59 (123.63.24.35) valid up
This Code (Part 10/Section 1) covers provisions relating to landscape planning, design and development with the aim of improving quality of outdoor built environment and protection of the land and its resources.
This Part of the Code was first published in 1970 and subsequently revised in 1983 and 2005. This Part earlier covered provisions relating to only signs and outdoor display structures. With growing urban development and environmental degradation, it had become imperative to determine landscape design parameters, and also provide rules, regulations, controls and procedures for the protection, preservation and modification of surrounding environment. In the last revision of 2005, this Part was, therefore, sub-divided into two sections as follows, by including a new section relating to landscaping:
Section 1 Landscape planning and design
Signs and outdoor display structures
The components of landscape design and external development were earlier covered in the Code in its various Parts/Sections but a comprehensive treatment was given in this new Section in the last revision only. A brief clause on street furniture was also introduced in this Section in the last revision.
In this revision, the Section is now called, Section 1 Landscape planning, design and development, and accordingly various provisions have been detailed to cover relevant aspects relating to overall landscape planning, design and development. In this revision, the following modifications have been incorporated:
a) Certain terminologies have been included/modified in view of the inclusion of above mentioned provisions and technological advancements in this field.
b) A new clause relating to landscape site planning requirements has been included.
c) A new clause covering in detailed guidelines relating to general development of landscapes has been included.
d) A new clause relating to roof landscape has been added.
e) Provisions relating to earth slopes and their grading have been shifted and now covered under the clause on statutory approvals.
f) New provisions related to materials and finishes plan have been included as part of the landscape development documents required for statutory approvals.
g) Provisions relating to paved surfaces in external areas have been shifted and now included under general development of landscapes for logical sequencing.
h) Lists of various plant species for different applications have been updated under various clauses.
The work of landscape planning, design and development is to be carried out by professionals in accordance with their qualification and competence given in Part 2 ‘Administration’ of the Code keeping in view the provisions of this Section.
The qualification and competence for carrying out the landscape planning, design and development work shall be as given in Part 2 ‘Administration’ of the Code.
For any development project for which a permit or licence or statutory approval is required, an application shall be made to the Authority on the prescribed form containing such particulars as the Authority may require. The form shall be signed by the owner and shall include the information given in 3.3. For various aspects of obtaining the permit, etc, reference shall be made to Part 2 ‘Administration’ of the Code.
The site plan to be submitted with the application for permit shall be drawn to a scale of not less than 1 in 200
for a site up to one hectare and not less than 1 in 500 for site up to 10 hectare and not less than 1 in 1 000 for site more than 10 hectare. The following information shall be provided in addition to requirements for site plan as stated in Part 2 ‘Administration’ of the Code:
a) Existing and proposed topographic contours at intervals not exceeding 500 mm and/or spot elevations as pertinent and bench mark of site with reference to the city datum relative to the mean sea level.
b) Limits of the 100 year flood plain and water surface elevation, where applicable.
c) Location of existing major physical features, such as railway track, drainage ways.
d) Location of service utilities adjacent to the project with relevant top and invert levels clearly indicated.
e) Point of egress and ingress including locations and width of road.
f) Fully dimensioned loading spaces and manoeuvring areas.
g) Parking including, location, parking spaces, size and number, and typical parking space details for both persons with disabilities and for standard spaces.
h) Circulation for vehicles, bicycle and pedestrian, including for persons with disabilities clearly identified.
j) Detail for parking areas including type of lighting, material for paving, and security rooms, rest rooms; and type of directional signage, etc.
k) Drainage system, proposed finished ground elevations and finished grades.
m) Location of proposed fire hydrant points.
n) Location of fire lanes.
p) Proposed lighting layout.
q) Landscape irrigation points and source of irrigation water.
r) Vegetation for screening by type, material, height, location, and spacing or fences, walls.
s) Location of proposed street furniture, landscape structure.
t) Refuse container location, size, and access.
u) Landscape paving materials with location.
w) Location, type, size, and height of existing and proposed signage.
y) List of existing trees with botanical and common names and height, girth, canopy of the tree and existing grade levels (see 11.1.2 for plant material schedule).
z) Prior approvals, where applicable.
The grading plan shall be drawn to a scale of not less than 1 in 200 for a site up to one hectare and not less than 1 in 500 for a site up to 10 hectare and not less than 1 in 1 000 for site more than 10 hectare. The grading plan should include measures for soil and sedimentation control and also measures during construction to prevent soil erosion, and also water harvesting practices (see also 11 and 12).
Design for changes in elevation in the outdoor environment is a primary component of landscape development. Grading of proposed external development areas should relate to the existing topography of the site and it should direct surface water runoff to the designated drainage and water harvesting area. Grading design parameters are as follows:
a) Proposed grading design should respond to the function and purpose of the activities to be accommodated within the site.
b) New development and structures to be integrated with existing landform within the site and in its immediate surroundings.
c) Stormwater to be directed away from buildings.
d) Steep slopes to be modified to minimize or eliminate erosion.
e) Legally, grades cannot be changed beyond the property line of the site.
f) Rate of stormwater runoff leaving the site after construction not to exceed the pre-construction rate.
g) Grading design should optimize cut and fill.
3.3.2.2.1 The submitted grading plan should include the following:
a) All existing and proposed features of the site, including all building with plinth level;
b) Structures such as walls, walks, steps, roads;
c) Utilities such as water lines, sewer and stormwater drainage, electrical lines; and
d) Utility structures like manholes, junction boxes, sewage treatment plant, septic tank, soak pit, water tanks, water treatment plant, transformers and all underground structures indicated appropriately.
Proposed features shall be indicated in firm lines and existing features in dash.
a) General landform concept graphically represented with appropriate symbols and abbreviations (see 3.3.2.4).
b) Proposed contour lines should be integrated with existing and proposed elevations within the project site.
c) Location of swales and surface water flow, surface and subsurface soil drainage system or water harvesting systems.
d) Location of drainage catchments, areas of retention/detention or disposal/outfall point as the case may be.
e) Spot grades on road, walks, and swales including top level and relevant invert levels of all utilities and utilities structures as mentioned above; critical spot elevation to be established (see 3.3.2.3).
The planting plan shall be drawn to a scale of not less than 1 in 200 for a site up to one hectare and not less than 1 in 500 for a site up to 10 hectare and not less than 1 in 1 000 for site more than 10 hectare with part plans at 1 in 200 of two of the design areas. Planting plan should include plant material schedule as shown in Table 1. The planting plan and landscape plan shall show identical information to avoid conflict between both plans. The planting plan shall include the layouts as per the following requirements, drawn to the scale:
a) Location of proposed trees, shrubs, ground covers including grass area indicated clearly with appropriate symbols and legend shall be indicated.
b) The shape, size, diameter of canopy of plants with their possible growth in coming 3 years shall be indicated.
c) Functional attributes and growth pattern tabulation shall be attached as given in Table 2, as an annex.
d) All existing vegetation shall be marked on the landscape plan and areas designated for preservation of existing vegetation on site shall be demarcated clearly (see also 11.1.2).
e) A concept plan of scale not less than 1 in 1 000 indicating the intent of the design with respect to the functions for various parts of the scheme shall be included with a short narrative, where applicable.
| Sl No. | Tree No. | Code | Botanical Name | Common Name | Quantity |
|---|---|---|---|---|---|
| (1) | (2) | (3) | (4) | (5) | (6) |
| Sl No. | Relevant Features | DescriptionPlant-1 |
|---|---|---|
| (1) | (2) | (3) |
| i) | Botanical name | |
| ii) | Common name | |
| iii) | Plant code | |
| iv) | Type (Evergreen/Deciduous) | |
| v) | Height | |
| vi) | Spread/Canopy | |
| vii) | Form of tree | |
| viii) | Flower colour | |
| ix) | Seasonal duration |
The materials and finishing plan shall be drawn to a scale of not less than 1 in 500 for a site up to 10 hectare and not less than 1 in 1 000 for site more than 10 hectare. The plan shall include materials specifications such as type, colour, size, thickness, and surface treatment.
Construction details, specifications and methods used for the following landscape elements are to be included, where applicable:
a) All paved areas for pedestrian and vehicular use, including edges, kerbs, bumper stops, steps, ramps, planters, railings or other protective devices; tree protection with tree grating, tree guard, etc; provision for wheel chair access and movement, and other accessibility details in accordance with 13 of Part 3 ‘Development Control Rules and General Building Requirements’ of the Code.
b) Boundary wall, fence, retaining wall, etc.
c) Structures in landscape such as gatehouses, kiosks, toilets, pergolas, space frame, pools, ponds, water bodies, any other special features.
d) Site utilities such as stormwater drains, manholes, catch basins, outdoor lighting fixtures, electric feeder pillars, junction box, fire hydrant, garbage collection points, litter bins.
e) Outdoor signage and street furniture.
f) Play equipment and tot lots, where appropriate.
g) Any other relevant detail or information.
The irrigation plan shall be drawn to a scale of not less than 1 in 500 for a site up to one hectare and not less than 1 in 1 000 for site more than one hectare. The plan shall include the following information:
a) Source of irrigation water.
b) Type of water conserving irrigation systems proposed, if any.
c) Extent of supplementary irrigation provided by water harvesting measures, if any.
d) Layout of the irrigation system proposed (including arrangement of hydrants or sprinklers indicating location and type with typical details and specifications, etc as applicable to the irrigation system).
f) Spot elevation of building floor finish level, steps, walls, terraces and other such structures.
g) Changes in direction or rate of slope.
Spot elevations shall be used to supplement contours in the following situations:
a) To indicate variations from the normal slope or gradient between contour lines.
b) To indicate elevations of intersecting planes and lines, like corners of buildings, walls, steps and kerbs.
c) To indicate elevations at top and bottom of vertical elements like walls, steps and kerbs.
d) To indicate floor and entrance elevations.
e) To indicate elevations of high and low points.
f) To indicate top elevations of utilities and utilities structure.
Slopes are expressed as follows:
a) Percentage (of slope) = (Vertical rise × 100)/(Horizontal distance) ,
for example, (1×100)/(50)=2 percent
b) Proportion (of slope) = Vertical rise (1.0 m) Horizontal distance, for example 1 m in 50 m or 1 : 50
c) Degree of slope, expressed as angle, for example, 10°, 15°, etc.
3.3.2.4 Typical grading symbols and abbreviations
| Symbol | Description |
|---|---|
| - -(100)- - | Existing contour |
| - 100 - | Proposed contour |
| (100.5) | Existing spot elevation |
| 100.5 (Bold) | Proposed spot elevation |
| CB | Catch basin |
| FFL | Finished floor level |
| FGL | Finished ground level |
| TW/BW | Top of wall/Bottom of wall |
| TK/BK | Top of kerb/Bottom of kerb |
| HP/LP | High point/Low point |
| IL | Invert level |
| x) | Zone (Functional attributes) |
| xi) | Characteristics |
| xii) | Function |
| xiii) | Remarks (including with regard to poisonous character and health ground) |
Every site has a history of use and change. Prior to formulation of a landscape master plan and its detailed design, an assessment of the landscape requirements for the site shall be established.
Landscape development brief shall include appropriate approaches for regional and bio-climatic variations.
Specific site factors such as topography, site aspect, hydrology, soils, existing vegetation, visual value, drainage, utilities, subsurface conditions, vegetation, microclimate, existing site infrastructure, built mass, traffic and connectivity shall be considered while developing the brief for landscape development.
Landscape development brief shall be in consonance with the statutory/development requirements.
Landscape development brief should be framed for specific uses or user groups including understanding of social, economic and safety related aspects.
The landscape development brief shall recognize special conditions, such as reclamation and/or rehabilitation of land, mitigation of other special existing conditions and conservation of existing value, prior to formulating a landscape master plan.
5.1.1 The general landscape development guidelines should be applied at two levels:
a) Masterplan level — This consists of those projects where the level of intervention is restricted to large scale landscape site planning; and
b) Detailed landscape design level — This consists of those projects where detailed landscape design is involved.
Open spaces are often further defined based upon access and ownership as public, semi-public and private. Planning and design of open spaces should consider the following aspects:
Sustainability — Environmental sustainability and green principles may be incorporated to ensure that landscape development does not hamper the existing ecology of the site and its surroundings (see also Part 11 ‘Approach to Sustainability’ of the Code). Land, vegetation and water sensitive design options may be explored during the design stage by incorporating a clear grading, drainage and planting strategy while developing the landscape concept. Cut and fill of the land may be minimized while locating the built blocks and circulation spaces. Gentler slopes with adequate green cover aids in erosion control thereby retaining the humus rich top soil. Stormwater runoff within the site may be filtered and either stored or allowed to recharge the groundwater table depending on the site conditions. As far as possible, it is desirable to use native and naturalized non-invasive species.
Accessibility — The planning and design of open spaces may be accessible for a wide range of users, including pedestrians, cyclist, transit riders and those using private modes of transport (see also 13 of Part 3 'Development Control Rules and General Building Requirements' of the Code). An ideal public space may be well connected to a surrounding bus/metro/mass rapid transit system facility or a neighbourhood street or a regional route.
Resilience — Resilience is the ability of a landscape to adapt to change and regain its original state when subject to shock, such as flooding, drought and pest attack. Natural
landscapes have an inherent ability to exhibit resilience, while human altered landscapes should be designed to incorporate resilience as a core principle of design.
5.1.2 The various guidelines for landscape spaces may be grouped as follows, which are given in 5.2 and 5.3, respectively:
a) Guidelines for general open spaces — These pertain to open spaces framed for specific uses and user groups, and include understanding of social, economic and safety related aspects.
b) Guidelines for special conditions — These pertain to open spaces which are either ecologically or culturally significant, and may require special considerations, such as reclamation, rehabilitation, restoration and/or redevelopment.
5.2.1 The design for the general type of open spaces should consider the following parameters:
a) Hierarchy of open spaces — Open spaces may be studied with respect to its relative size to better understand the complexities of the issues related to them, with respect to functional, visual and ecological concerns.
b) Usage of open spaces — Design of open spaces should have a certain character based on its usage. It is desirable that the design of these open spaces take into consideration the existing and proposed use of the open space, as well as the specific needs of the users. The design of these spaces may also be reviewed in terms of whether they are public, semi-public or exclusively private spaces. Open spaces may be planned for a variety of functional uses by different users or diverse user groups, so that they are able to provide for a variety of recreational opportunities and spatial experiences.
c) Location of spaces — The design guidelines may be interpreted so as to suit the biogeoclimatic setting of these landscapes. The approach to planning and design of these open spaces would vary greatly depending on the climatic conditions and layout of the site. The specificities of the requirements for landscape
should be studied in detail before commencing the planning and design process.
The following types of generic open spaces may be identified:
Regional parks/city parks,
Roads,
Public plazas and urban squares,
Multipurpose open spaces/mela grounds,
Urban riverfronts and waterfronts,
District parks/neighbourhood parks,
Theme parks/waterparks,
Sports facilities/playgrounds/stadium complexes/sports centre,
Golf courses/equestrian grounds,
Plant nurseries,
Pocket parks, and
Open spaces associated with largescale developments.
a) The site and context study are important tools for assessing the suitability of land use and nature of design intervention. The design for any particular site may be developed as an outcome of the site analysis.
b) The design may be conceptualized so as to maximize the site potentials while the site constraints should also be taken into consideration.
a) Landscape elements, such as outdoor furniture, lighting and other required facilities, may be placed sensitively along the proposed circulation path with consideration of usage patterns.
b) Adequate shading may be provided for areas where the community congregates in warmer climatic locations, while areas designed for public gathering in cold regions may be shielded from wind.
c) The extent of the paved areas may be restricted to a minimum, keeping in mind the pedestrian routes, density of usage, spaces for congregation, etc. Paved areas may be planned so that they do not restrict any natural surface flow of water and nor do they get waterlogged during the rainy months.
d) Landscape design may be used to improve the environmental quality of the open spaces. Sufficient landscape may be provided at both
horizontal and vertical planes to reduce the ambience temperature and glare. This may be in the form of conventional planting or devices like vertical greenwalls, green roofs, etc. Large unshaded paved plazas may contribute to urban heat island effect. See 7.1.2.2 and 7.4.7 of Part 11 ‘Approach to Sustainability’ of the Code.
a) A variety of recreational options for different ages and interests may be provided.
b) Different cultural recreation preferences may be considered while designing open spaces by using community feedback to determine their needs and requirements.
c) A variety of amenities that encourage extended use, such as water fountains, and picnic tables, may be provided.
d) Plants for hiding and materials for making shelters may be considered. Opportunities to create appreciation for nature and the pleasure of discovering scientific phenomenon may be provided.
e) Spaces should be designed for use by people of all abilities, including those using mobility aids (for example, wheelchairs). See 13 of Part 3 ‘Development Control Rules and General Building Requirements’ of the Code.
a) Opportunities for children to explore imaginative play through interaction with natural elements of their environment may be provided.
b) Raised beds or planting areas, play shelters, niches, sand areas, etc, may be provided.
c) Ways of functioning of natural systems within the site may be explored. For example, hydrology and water flows that attract butterflies, birds, and frogs may be considered.
d) Science play opportunities that stimulate curiosity about science may be provided. Suggested elements may include centrifugal force, sound waves, sunlight refractors, weather stations and windmills.
e) Signage that gives cues to parents about things to show or teach their children, using equipment or other elements of the playground, may be provided.
f) All possible efforts should be made to extend opportunities to children of all abilities and age, by providing access to a variety of play
features and using features that appeal to all of the senses. See 13 of Part 3 ‘Development Control Rules and General Building Requirements’ of the Code.
a) Hard landscape materials and their details may be worked out so that sharp corners, injurious edges and easily breakable materials are avoided in the public landscape.
b) Plant materials may be selected taking into consideration the possible issues of allergic reactions or toxicity.
c) Level differences in the open spaces may be treated with adequate care so as to avoid potential fall/injury. Level differences of a single step may be avoided in landscaped areas since they may aggravate the chances of tripping and injury.
d) Durable, easy to repair equipment and safety surfacing may be considered for play areas. International Safety Standards, such as fall zones, safety surface, fall height, and entrapment concerns may be considered for play equipment and surfaces. The flooring material of these spaces may be impact absorbing and injury proof.
e) In areas for smaller children, the number of exits and their placement may be limited so that they are easily monitored by parents and guardians.
f) Creation of hidden areas in the landscape should be avoided. The density of vegetation and height of the understory planting may be decided so as to keep the view-lines clear.
g) Lighting may be done so as to ensure that all usable areas of the landscape are well lit and there are no dark spots in the landscape.
Existing master plans, regulations, byelaws, etc, that may have defined uses, connections, materials or conventions, shall be reviewed for ensuring compliance. Design of public open spaces may address the concerns of the neighbourhood and express the identities of the neighbourhoods they pass through.
a) Linear parks may be used to provide continuous paths for bicycles and pedestrians.
b) Greenway plans may be researched and opportunities to connect greenway paths be explored so as to establish connections
12
between adjacent neighborhoods. Pedestrian movement corridors may be given precedence over vehicular corridors.
c) Commuting or high speed bike lanes may be separated from the pedestrian paths.
d) Signage style and vocabulary along multiple open spaces and parks to guide users may be kept consistent for ease of understanding. See Part 10 ‘Landscape Development, Signs and Outdoor Display Structures, Section 2 Signs and Outdoors Display Structures’ of the Code.
a) Pedestrian circulation path consists of sidewalks, wheelchair ramp, and landings. Footpaths of minimum width 1.80 m may be provided along the length of road for any public or private building where pedestrian traffic is expected. See 4.3.2.1 of Part 3 'Development Control Rules and General Building Requirements' of the Code for computation of capacity of footpaths with respect to their widths.
b) Natural materials such as stone, or manmade materials such as tiles or cast in-situ concrete, of appropriate thickness may be used as paving finish in external areas. Adequate slope and drainage facility may be considered for all external paved surface integrating it with the pavement design.
c) Surface treatment of the finishes may be such that it remains anti-skid throughout the seasons. Smooth finish is not recommended for external areas except to convey any design concept.
d) Change in levels and steps may be depicted in different texture or colour as a visual clue.
e) The cross slope of sidewalk may be designed so as not to exceed two percent (1 in 50). The longitudinal slope of path may not exceed 1 in 20, unless the longitudinal slope of the road exceeds this maximum, in which case the norms applicable to a ramp should be applied. Kerb ramps may be provided at pedestrian crossings. See also 13 of Part 3 ‘Development Control Rules and General Building Requirements’ of the Code.
f) All ramps should have minimum width of 1.20 m, excluding edge protection. The cross slope of ramp should not exceed 1 in 50 and the longitudinal slope of ramp may not exceed 1 in 12. All ramps may have an unobstructed level landing both at top and bottom of the ramp. The landing may have the minimum width as that of the ramp. The landing may be
minimum 1.50 m in length. Any ramp beside the road may be located in such a way so that vehicles cannot park blocking the access. The ramps shall also comply with the requirements of 13 of Part 3 ‘Development Control Rules and General Building Requirements’ of the Code.
Handrails may be provided for any ramp with a vertical height greater than 150 mm, to prevent pedestrians and wheelchair users slipping from the ramp. The height of the top handrail may be 900 mm from the top surface of the ramp. The ramp surface may be rough finished. All ramp and landing may be designed so that water does not collect on the surface of the ramp or landing.
h) Requirements of 7.4.3 of Part 11 ‘Approach to Sustainability’ of the Code should also be taken in to consideration.
a) Parking spaces may be provided off-street or as dedicated parking pockets with ample turning radii for manoeuverability of vehicles.
b) The parking lots need to be shaded during the day while being well lit during the night and should be easily accessible.
c) Pedestrian connections to and fro the parking lots may be denoted with easily recognizable signage elements.
d) The parking spaces shall be provided in accordance with 10 of Part 3 ‘Development Control Rules and General Building Requirements’ of the Code.
e) Parking bays for persons with disabilities shall be provided as per 13 of Part 3 'Development Control Rules and General Building Requirements' of the Code.
a) Grading may be used to minimize creation of steep slopes and retaining walls in the landscaped areas by assessing the existing contours and locating the functional landscape spaces, taking into consideration the existing layout of the land.
b) Site grading may generally be limited to areas adjacent to the building, under access roads and driveways, or in areas where cut and fill are inevitable such as those sites which are prone to landslides.
c) Buildings and roads may be planned so as to generally follow the existing contours. On sloping sites, buildings may have multiple levels to maximize the potential of contoured sites.
d) Wherever possible, measures like naturally stabilizing slopes and bio-engineering measures may be explored in order to avoid construction of retaining walls.
e) Where grading occurs, new slopes may be configured to retain the natural character of the site. New contour lines may be carved to mimic the natural contours.
a) Kerbs may be provided on the edges of the driveways to adequately control drainage within the road, prevent moisture from entering the sub-grade, separate the road from the pedestrian area, and provide adequate lateral support for the pavement structure.
b) The roads should provide clear access to fire fighting vehicles, ambulance, sanitation vehicles, etc, and also allow for safe movement for vehicles, pedestrians and wheelchair users. The road widths, alignments and service lanes, etc, may be such that they are adequate as per the relevant Indian Road Congress Standards.
c) Lane markings, kerb edges, central median, etc, may be provided for smooth movement of the traffic and also to guide the vehicles to stay within the designated driveways.
d) Driveways may preferably be shaded by trees. The choice and appropriateness of selection of plants along the road should be in accordance with 7.
e) Pedestrian crossings (on grade/subways/foot overbridges) may be provided along the pedestrian sidewalks at vehicular intersections to allow for continuous uninterrupted pedestrian movement.
f) Pathways along vehicular roads may be physically separated by means of kerbs, graded separation, barrier, railing, or other means to prevent ingress of vehicles.
g) Roads may be designed with provision for appropriate street furniture (see 13 and other urban adjuncts for the convenience of the users). Benches, shelters, poles, signs, bus stops, etc, may be located on edge of the sidewalk with clear minimum width of 1.20 m to enable unhindered pedestrian circulation.