BUREAU OF INDIAN STANDARDS
- FOREWORD
- ... 3
- 1 SCOPE
- ... 5
- 2 TERMINOLOGY
- ... 5
- 3 GENERAL
- ... 6
- 4 DESIGN GUIDELINES FOR ESCALATORS AND MOVING WALKS
- ... 8
- 5 ARRANGEMENT AND PLANNING DIMENSIONS
- ... 8
- 6 SPACE REQUIREMENT
- ... 12
- 7 FIRE PROTECTION
- ... 18
- 8 MINIMUM TECHNICAL AND SAFETY REQUIREMENTS
- ... 19
- 9 SPECIAL TECHNICAL REQUIREMENTS
- ... 23
- 10 PERFORMANCE REQUIREMENTS FOR ESCALATORS AND MOVING WALKS
- ... 25
- 11 ESCALATOR AND MOVING WALK ENQUIRY OR INVITATION TO TENDER
- ... 26
- 12 ACCEPTANCE OF TENDER AND SUBSEQUENT PROCEDURE
- ... 27
- 13 COORDINATION OF SITE WORK
- ... 28
- 14 INSPECTION AND ACCEPTANCE PROCEDURES
- ... 28
- 15 OPERATION AND MAINTENANCE
- ... 31
- ANNEX A TYPICAL ESCALATOR SITE CHECKLIST/INSPECTION LIST
- ... 36
- ANNEX B TYPICAL CHECK LIST FOR FUNCTIONAL TESTS ON SAFETY SWITCHES AND DEVICES
- ... 40
- ANNEX C TYPICAL EXAMPLES OF MAINTENANCE CHECKS TO MAINTAIN THE INSTALLATION
- ... 42
- ANNEX D EXAMPLES OF ELEMENTS TO BE TAKEN INTO ACCOUNT IN ANY RISK ASSESSMENT FOR MAINTENANCE OPERATIONS
- ... 43
- LIST OF STANDARDS
- ... 44
This Code (Part 8/Subsection 5B) covers the essential requirements for planning, installation, operation, maintenance and inspection of escalators and moving walks so as to ensure safe movement of people with satisfactory performance, while using these.
This Section was first published in 1970 and was subsequently revised in 1983 and 2005. This Section covers the requirements for installation of lifts and escalators in buildings. This Section shall be read with Part 4 ‘Fire and Life Safety’ of the Code from fire safety requirements point of view. The major changes in the first revision of 1983 were addition of outline dimensions of different types of lifts and detailed requirements of escalators in buildings. Emphasis was laid on coordination between the engineer/architect and the lift manufacturer to arrive at the number and position of lifts for attaining optimum efficiency in serving the building with safety.
The significant changes with respect to lifts incorporated in the last revision in 2005, included addition of new clauses/recommendations on building management system; addition of new clauses on fireman's lift, infrared light curtain, safety and Braille button for blind people and updation of provisions as per the revised standards on lifts on which this Section was based.
As a result of experience gained since implementation of 2005 version of the Code and feedback received as well as revision of Indian Standards on which this Section was based, a need was felt to revise this Section. In this revision, the erstwhile Section 5 on Lifts and Escalators has been divided into two subsections namely:
5A Installation of Lifts
5B Installation of Escalators and Moving Walks
This revision has, therefore, been formulated to take care of these. This Subsection (5B) addresses exclusively the provisions related to installation of escalators and moving walks, which are being increasingly provided in buildings. Compared to the previous version where brief details were covered in Section 5 with respect to escalators, this Subsection now covers comprehensive provisions on all aspects, including requirements for planning, installation, operation, maintenance and inspection of escalators, so as to ensure safe movement of people with satisfactory performance. This also now covers provisions on moving walks.
Assistance has been derived from the following publications in the formulation of this Subsection:
EN 115-1: 2008 Safety of escalators and moving walks — Part 1: Construction and installation
IBC 2015 International Building Code, International Code Council, Washington, USA
JIS A 4302 : 2006 Inspection standard of elevator, escalator and dumbwaiter
CIBSE Guide D: Transportation Systems in Buildings, 2015, The Chartered Institution of Building Services Engineers, London, U.K.
All standards, whether given herein above or cross-referred to in the main text of this Subsection, are subject to revision. The parties to agreement based on this Subsection are encouraged to investigate the possibility of applying the most recent editions of the standards.
For the purpose of deciding whether a particular requirement of this Subsection is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this Subsection.
PART 8 BUILDING SERVICES Section 5 Installation of Lifts, Escalators and Moving Walks: 5B Escalators and Moving Walks

















