BUREAU OF INDIAN STANDARDS
- FOREWORD
- 1 SCOPE
- 2 TERMINOLOGY
- 3 GENERAL
- 4 WATER SUPPLY
- ANNEX A APPLICATION FORM FOR TEMPORARY/PERMANENT SUPPLY OF WATER/FOR ADDITIONS AND/OR ALTERATIONS FOR SUPPLY OF WATER
- ANNEX B FORM FOR LICENSED/REGISTERED PLUMBER'S COMPLETION CERTIFICATE
- ANNEX C NOMOGRAM OF HAZEN AND WILLIAM'S EQUATION
- LIST OF STANDARDS
This Code (Part 9/Section 1) covers the requirements of water supply in buildings. The water supply provisions covered in this Section encompass the requirements of water supply, plumbing connected to public water supply, design of water supply systems, principles of conveyance and distribution of water within the premises, hot water supply system, inspection and maintenance of water supply systems. It also covers design of water supply systems in high altitudes and/or sub-zero temperature regions.
In the first version of the Code formulated in 1970, three separate sections of Part 9 Plumbing Services were brought out, namely, Section 1 Water supply, Section 2 Drainage and sanitation, and Section 3 Gas supply. These sections were subsequently revised in 1983. The major changes incorporated in the first revision in Section 1 Water supply, were: rationalization of definitions and addition of definitions for more terms; addition of universal pipe friction diagram and nomogram of Hazen and Willam's equation for discharge computation, deleting the discharge curves based on Chezy's formula; introduction of a detailed clause giving guidance on the design of water supply system for multi-storeyed buildings; modification to indicate that no separate storage need be provided for flushing and domestic purposes for health reasons and a single storage tank may be provided; modification/amplification of provisions relating to domestic hot water supply installations; introduction of a detailed clause covering recommendations to be considered while planning and designing water supply systems peculiar to high altitude and/or sub-zero temperature regions of the country; and addition of requirements relating to inspection, testing and maintenance applicable to hot water supply system.
As a result of experience gained in implementation of 1983 version of the Code and feedback received as well as revision of some of the standards based on which this Section was formulated, a need to revise this Section was felt. The last revision was therefore formulated to take care of these. In the last revision, the erstwhile two sections were merged and a combined and comprehensive Section, namely Section 1 Water supply, drainage and sanitation (including solid waste management), was brought out. Gas supply was brought out as Section 2. Following significant changes were incorporated in the last revision of Section 1 on water supply, drainage and sanitation, in respect to water supply: modification of provision of water supply requirement; addition of a new clause on water supply for other than residential purposes; addition of a new clause on quality of water, also including therein a sub-clause on waste water reclamation; modification of the provision regarding storage of water and introduction of guidelines for calculating storage capacity; modification, in the design of distribution system provisions for discharge computation, to include designed consumer pipes based on fixtures unit also taking into account probable simultaneous demand instead of earlier computation based on Reynold's Number; introduction of an alternative option of variable speed drive pumping system to hydro pneumatic system; addition of a new clause on backflow prevention; addition of provision for suitability of galvanized mild steel tanks on the basis of pH of the water; detailing of types of hot water heater; and restructuring of the section was done to make it more user friendly.
The last revision also incorporated for the first time the provisions on solid waste management.
In this revision, to address the various and distinct features related to the plumbing aspects and solid waste management comprehensively, this Part 9 has been rearranged as follows:
Section 1 Water supply
Section 2 Drainage and sanitation
Section 3 Solid waste management
Section 4 Gas supply
Further, in this revision of the Section 1, the following significant changes/modifications have been incorporated:
-
Provisions on water supply requirements for buildings have been related to the estimated occupancy in the chosen type of building.
-
Table 1 on water requirements for buildings other than residences has been updated with respect to type
of buildings and it now also includes domestic and flushing requirements separately.
-
Water demand for landscaping purposes has been included.
-
Requirements related to treatment of waste water and usage of recycled waste water have been included.
-
Materials used for storage water tanks have been updated.
-
Provisions related to quantity of water to be stored have been updated.
-
Provisions have been included for protection of water supply by avoiding cross-connection between treated and raw water supplies and back flow prevention, and securing identification of non-potable water supply pipes.
-
List of materials used to manufacture pipes has been updated.
-
General requirements for design of distribution systems have been included.
-
Table 2 on fixture unit for different types of fixtures has been updated.
-
Table 3 on probable simultaneous demand has been updated with demand values included various intermediate and up to 10 000 fixture units, along with graphs for probable demand.
-
Maximum flow rate and flush volumes have been included.
-
Provisions related to inadequate and excessive water pressure have been included.
-
Guidance on water hammer effects have been included.
-
Provisions for distribution systems in multi-storeyed buildings have been updated along with illustrations therefor.
-
Provisions related to zoning of distribution systems have been included.
-
Hot water supply systems have been included under the existing clause on hot water supply installations.
-
Detailed provisions related to swimming pools have been included.
-
Guidance on allowance for expansion of water pipes have been included.
-
A new clause on colour coding for different types of water pipes has been included.
-
Provisions have been reviewed and updated from the point of view of accessibility by elderly and persons with disabilities, also, in this context, duly giving cross-reference to 13 of Part 3 ‘Development Control Rules and General Building Requirements’.
-
Certain terminologies have been included and some have been updated.
-
Cross-references to Indian Standards have been updated.
This Section is largely based on the following Indian Standards:
IS 1172 : 1993 Code of basic requirements for water supply, drainage and sanitation (fourth revision)
IS 2065 : 1983 Code of practice for water supply in buildings (second revision)
IS 6295 : 1986 Code of practice for water supply and drainage in high altitudes and or sub-zero temperature regions (first revision)
IS 7558 : 1974 Code of practice for domestic hot water installations
IS 12183 (Part 1) : 1987 Code of practice for plumbing in multi-storeyed buildings : Part 1 Water supply
A reference to SP 35 : 1987 ‘Handbook on Water Supply and Drainage’ may be useful, from where also, assistance has been derived.
All standards, whether given herein above or cross-referred to in the main text of this Section, are subject to revision. The parties to agreement based on this Section are encouraged to investigate the possibility of applying the most recent editions of the standards.
In the formulation of this Section, reference has also been made to the following:
International Plumbing Code 2015, International Code Council, and
Uniform Plumbing Code 2015, International Association of Plumbing and Mechanical Officials
(INCLUDING SOLID WASTE MANAGEMENT)
Section 1 Water Supply






