-
Various tables on the requirements for fitments for drainage and sanitation for various occupancies have been updated, and a new table for shopping malls and retail buildings has been included.
-
Enabling provisions for use of corrugated pipes, low noise pipes and under slung pipes have been included.
-
Information about bio-toilets has been added.
-
Typical mounting arrangements for various plumbing fixtures, including drainage systems and ventilation have been illustrated.
-
A new table for calculation of single stack sizing has been included.
-
Various additional requirements relating to layout of drainage and sanitation system have been added.
-
Venting system for high rise buildings, along with a comprehensive table on size and developed length of stack vents and vent stacks, has been included.
-
General provisions on design of drainage pipes have been elaborated.
-
Provisions relating to gradients of drainage pipes have been elaborated.
-
The table on fixture unit for different types of fixtures has been updated.
-
The tables on maximum number of fixture units that can be connected to branches and stacks, and to building drains and sewers, have been updated.
-
New provisions on design requirement for high rise buildings drainage system have been included.
-
The minimum diameter for floor drains outlets before connecting to floor trap has been included.
-
Provisions related to manhole covers and recommended locations have been included.
-
Provision for estimation of storm water runoff and coefficient of runoff for various surfaces have been included.
-
The table on sizing of rainwater pipes for roof drainage has been updated.
-
The illustration on artificial ground water recharge structure has been detailed.
-
Guidelines relating to siphonic drainage system for large roofs have been included.
-
Provisions on rainwater harvesting for plotted/group housing developments and deep well/bore well recharging, have been included.
-
Clarifications and recommendations on use of septic tanks have been made.
-
New provisions related to pumping and treatment of sewage have been included.
-
A provision on treatment of waste water and usage of recycled water has been included through cross-reference to Section 1 ‘Water supply’ of this Part of the Code.
-
Provisions have been reviewed and updated from the point of view of accessibility by elderly and persons with disabilities, also, in this context, duly giving cross-reference to 13 of Part 3 ‘Development Control Rules and General Building Requirements’ of the Code.
-
Certain terminologies have been included and some have been updated.
-
Cross-referred standards have been updated.
This Section is largely based on the following Indian Standards:
IS 1742 : 1983 Code of practice for building drainage (second revision)
IS 4111 (Part 1): 1986 Code of practice for ancillary structures in sewage system: Part 1 Manholes (first revision)
IS 5329 : 1983 Code of practice for sanitary pipe work above ground for buildings (first revision)
IS 6295 : 1986 Code of practice for water supply and drainage in high altitudes and or sub-zero temperature regions (first revision)
A reference to SP 35:1987 ‘Handbook on Water Supply and Drainage’ may be useful, from where also, assistance has been derived.
All standards, whether given herein above or cross-referred to in the main text of this Section, are subject to revision. The parties to agreement based on this section are encouraged to investigate the possibility of applying the most recent editions of the standards.
In the formulation of this Section, reference has also been made to the following:
International Plumbing Code 2015, International Code Council, and
Uniform Plumbing Code 2015, International Association of Plumbing and Mechanical Officials