The significant changes incorporated in this revision include the following:
a) This Subsection now also covers construction practices with bamboo which were earlier covered in Part 7 ‘Construction Management, Practices and Safety’ of the Code.
b) Definitions of some existing terms have been modified as per the prevailing engineering practice and new terms relating to bamboo based panel products have been added.
c) Provisions on bamboo trusses have been further updated.
d) Some details about bamboo foundations have been included.
e) Use of bamboo as reinforcement in concrete has been included.
f) Provisions for use of bamboo based materials/panel products as walling, flooring and roofing, and in-in-fill panels for wall and common roof covering/cladding materials, have been included. Some provisions for reconstituted wood from destructured bamboo have also been included.
g) References to all the concerned Indian Standards have been updated.
With the standardization on design and construction aspects of bamboo in this Subsection of the Code, it is expected to ensure durable structures, however, some specific guidelines are required in the event of tropical cyclones in the sub-continent and the traditional non-engineered structures generally constructed. Keeping this in view, some recommendations are given in Annex B which may be followed in addition to provisions given in the main text of this Subsection.
The information contained in this Subsection is largely based on the works carried out at Forest Research Institute, Dehradun, Indian Plywood Industries Research and Training Institute, Bangalore, International Network for Bamboo and Rattan (INBAR) documents and Indian Standards given below. Assistance has also been derived from ISO 22156 : 2004 ‘Bamboo-Structural design’.
IS 9096 : 2006 Code of practice for preservation of bamboo for structural purpose (first revision)
IS 15912 : 2012 Code of practice for structural design using bamboo
All standards, whether given herein above or cross-referred to in the main text of this Subsection, are subject to revision. The parties to agreement based on this Subsection are encouraged to investigate the possibility of applying the most recent editions of the standards.
For the purpose of deciding whether a particular requirement of this Subsection is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this Subsection.