The information contained in this Subsection is largely based on the following Indian Standards:
IS 399 : 1963 Classification of commercial timbers and their zonal distribution (revised)
IS 883 : 2016 Code of practice for design of structural timber in building (fifth revision)
IS 1150 : 2000 Trade names and abbreviated symbols for timber species (third revision)
IS 2366 : 1983 Code of practice for nail-jointed timber construction (first revision)
IS 4891 : 1988 Specification for preferred cut sizes of structural timber (first revision)
IS 4983 : 1968 Code of practice for design and construction of nailed laminated timber beams
IS 11096 : 1984 Code of practice for design and construction of bolt-jointed timber construction
IS 14616 : 1999 Specification for laminated veneer lumber
All standards, whether given herein above or cross-referred to in the main text of this Subsection, are subject to revision. The parties to agreement based on this Subsection are encouraged to investigate the possibility of applying the most recent editions of the standards.
For the purpose of deciding whether a particular requirement of this Subsection is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this Subsection.