This Code (Part 5) covers the requirements of building materials and components, and criteria for accepting new or alternative building materials and components.
BUREAU OF INDIAN STANDARDS
This Code (Part 5) lists Indian Standard specifications for materials used in building construction. The Indian Standards for methods of tests, to ensure the requirements demanded of the materials in the various situations, are also included. This is with a view to ensuring the quality and effectiveness of building materials used in the construction and of their storage, which are as important as other aspects of building activity like planning, designing and constructing the building itself.
Historically, choice of building materials was determined by what was locally available, appropriateness to geoclimatic conditions and affordability of users. In the recent past, different initiatives have been taken in the areas of research and development, standardization, and development and promotion of innovative materials. A review of the recent trends indicates that the growth in the area of building materials covers emerging trends and latest developments in the use of wastes, mineral admixtures in cement and concrete, substitutes to conventional timber, composite materials and recycling of wastes, at the same time ensuring desired response of materials in relation to fire safety, long term performance and durability. In addition to these, nowadays, development of specific materials is being researched which may be structured and designed to meet needs to specially developed construction technologies in time to come, such as, for disaster prone areas or aggressive climatic and industrial situations.
To encourage use of appropriate materials, it may be desirable to have to the largest extent possible, performance oriented approach for specifications rather than prescriptive approach. The approach has been already adopted in some cases in development of standards, wherever found possible.
Indian Standards cover the requirements for most of the materials in use. However, there may be a gap between development of new materials and techniques of application and formulation of standards. It, therefore, becomes necessary for a Building Code to be flexible to recognize building materials other than those for which Indian Standards are available. This Part of the Code, therefore, since its first version, duly takes care of this aspect and explicitly provides for use of new or alternate building materials, provided it is proved by authentic tests that the new or alternative material is effective and suitable for the purpose intended. However, it is worthwhile that more and more emphasis is given to the satisfaction of performance requirements expected of a building material, so that a wide range of such new or alternate materials can be evaluated and used, if found appropriate.
As already emphasized, quality of material is quite important for their appropriate usage, whether it is a material for which an Indian Standard is available or a new or alternative material as defined in 4 of this Part of the Code. While continuing to emphasize on conformity of building materials to available Indian Standards, this Part recommends that the building regulating authority may also recognize the use of building materials conforming to other specifications and test methods (see 4.2), in case Indian Standards are not available for particular materials. Third party certification schemes available in the country for quality assurance of above materials can be used with advantage to ensure the appropriateness of these materials.
It is well recognized that buildings during their construction and subsequently in their operation consume lot of resources. The holistic approach for ensuring proper and sustainable developments is to take care of the concerned aspects affecting sustainability during the conceptualization, planning, design, construction, and operation and maintenance stages. The building material production, transportation and utilization assume a substantial component of the embodied energy that goes into a building. It is therefore important that sustainability of building materials is well understood and ensured in a building project. This Part of the Code recognizes this aspect and covers appropriate provision therefore.
This Part of the Code was first published in 1970 and subsequently revised in 1983 and 2005 as Part 5 of NBC 2005. The first and second revision of this Part incorporated an updated version of the list of Indian Standards given at the end of this Part of the Code. Also the list of building materials was completely revised to make it more user-friendly. This second revision of this Part, while basically retaining the structure of 2005 version of the Code, incorporates the following modifications:
a) The clause on new/alternative materials has been extended to give examples of some potential new/alternative materials;
b) Recognizing the importance of sustainability in building construction and built environment, a new clause giving broad aspects relating to sustainable materials, has been added;
c) The list at the end of this Part has been updated to reflect the latest available Indian Standard specifications and methods of test.
d) In the above list, existing categories have been re-organized and some new categories have been added either under the existing principal categories or as separate principal categories. In the process, the categories such as, bricks, blocks and other masonry units; mortar (including sand for mortar); supplementary cementitious materials; mesh/net for mosquito/vector prevention; concrete door and window frame; other composite material doors and windows; fire check doors; stone flooring, etc, have been added.
e) The headings of some of the categories have been rechristened to more appropriately reflect the materials/products actually covered thereunder.
A reference to SP 21 : 2005 ‘Summaries of Indian Standards for Building Materials’ may be useful. This publication gives the summaries of Indian Standards covering various building materials, fittings and components except standards relating to paints.
All standards cross-referred in the main text of this Part, are subject to revision. The parties to agreement based on this Part are encouraged to investigate the possibility of applying the most recent editions of the standards.
For the purpose of deciding whether a particular requirement of this Part is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this Part.
IS No. 3952 : 2013 Title Specification for burnt clay hollow bricks and blocks for walls and partitions (third revision)
b) Stabilized Soil Products
IS No. Title
1725 : 2013 Specification for stabilized soil blocks used in general building construction (second revision)
1077 : 1992 Specification for common burnt clay building bricks (fifth revision)
2180 : 1988 Specification for heavy duty burnt clay building bricks (third revision)
2222 : 1991 Specification for burnt clay perforated building bricks (third revision)
2691 : 1988 Specification for burnt clay facing bricks (second revision)
3495 (Parts 1 to 4): 1992 Methods of test of burnt clay building bricks (third revision) Determination of compressive strength Determination of water absorption Determination of efflorescence Determination of warpage
3583 : 1988 Specification for burnt clay paving bricks (second revision)
3952 : 2013 Specification for burnt clay hollow bricks and blocks for walls and partitions (third revision)
4885 : 1988 Specification for sewer bricks (first revision)
5454 : 1978 Methods for sampling of clay building bricks (first revision)
5779 : 1986 Specification for burnt clay soling bricks (first revision)
6165 : 1992 Dimensions for special shapes of clay bricks (first revision)
13757 : 1993 Specification for burnt clay fly ash building bricks
7556 : 1988 Specification for burnt clay jallies (first revision)
| d) Adhesives | |||
| IS No. | Title | 4139 : 1989 | Specification for calcium silicate bricks (second revision) |
| 848 : 2006 | Specification for synthetic resin adhesives for plywood (phenolic and aminoplastic) (second revision) | 6932(Part 1) : 1973 | Method of tests for building limesDetermination of insoluble residue, loss on ignition, insoluble matter, silicon dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide |
| 849 : 1994 | Specification for cold setting case in glue for wood (first revision) | ||
| 851 : 1978 | Specification for synthetic resin adhesives for construction work (non-structural) in wood (first revision) | (Part 2) : 1973 | Determination of carbon dioxide content |
| 852 : 1994 | Specification for animal glue for general wood-working purposes (second revision) | (Part 3) : 1973 | Determination of residue on slaking of quicklime |
| 1508 : 1972 | Specification for extenders for use in synthetic resin adhesives (urea-formaldehyde) for plywood (first revision) | (Part 4) : 1973 | Determination of fineness of hydrated lime |
| (Part 5) : 1973 | Determination of unhydrated oxide | ||
| (Part 6) : 1973 | Determination of volume yield of quicklime | ||
| 4835 : 1979 | Specification for polyvinyl acetate dispersion-based adhesives for wood (first revision) | (Part 7) : 1973 | Determination of compressive and transverse strength |
| 9188 : 1979 | Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition | (Part 8) : 1973 | Determination of workability |
| (Part 9) : 1973 | Determination of soundness | ||
| (Part 10) : 1973 | Determination of popping and pitting of hydrated lime | ||
| 12830 : 1989 | Rubber based adhesives for fixing PVC tiles to cement | (Part 11) : 1984 | Determination of setting time of hydrated lime |
| 12994 : 1990 | Epoxy adhesives, room temperature curing general purpose | 10360 : 1982 | Specification for lime pozzolana concrete blocks for paving |
IS No. Title
15477 : 2004 Specification for adhesives for use with ceramic tiles and mosaics
712 : 1984 Specification for building limes (third revision)
1624 : 1986 Method of field testing of building lime (second revision)
2686 : 1977 Specification for cinder as fine aggregates for use in lime concrete (first revision)
3068 : 1986 Specification for broken brick (burnt-clay) coarse aggregates for use in lime concrete (second revision)
3115 : 1992 Specification for lime based blocks (second revision)
3182 : 1986 Specification for broken bricks (burnt clay) fine aggregates for use in lime mortar (second revision)
4098 : 1983 Specification for lime-pozzolana mixture (first revision)
10772 : 1983 Specification for quick setting lime pozzolana mixture
12894 : 2002 Specification for pulverized fuel ash lime bricks (first revision)
15648 : 2006 Specification for pulverized fuel ash for lime-pozzolana mixture applications
Every material used in fulfillment of the requirements of this Part, unless otherwise specified in the Code or approved, shall conform to the relevant Indian Standards. A list of Indian Standard specifications as the ‘accepted standards’ is given at the end of this Part of the Code. At the time of publication of the Code, the editions indicated were valid. All standards are subject to amendments and revisions. The Authority shall take cognizance of such amendments and revisions. The latest version of the specification shall, as far as possible, be adopted at the time of enforcement of this Part of the Code.
654 : 1992 Specification for clay roofing tiles, Mangalore pattern (third revision)
1464 : 1992 Specification for clay ridge and ceiling tiles (second revision)
1478 : 1992 Specification for clay flooring tiles (second revision)
2690 Specification for burnt clay flat terracing tiles
(Part 1): 1993 Machine made (second revision)
(Part 2): 1992 Hand made (second revision)
3367 : 1993 Specification for burnt clay tiles for use in lining irrigation and drainage works (second revision) 3951 Specification for hollow clay tiles for floor and roofs
(Part 1): 2009 Filler type (second revision)
(Part 2): 2009 Structural type (second revision)
8920 : 1978 Methods for sampling of burnt clay tiles
13317 : 1992 Specification for clay roofing county tiles, half round and flat tiles
a) Aggregates IS No.
383 : 2016 Specification for coarse and fine aggregates for concrete (third revision)
650 : 1991 Specification for standard sand for testing of cement (second revision)
1542 : 1992 Specification for sand for plaster (second revision)
2116 : 1980 Specification for sand for masonry mortars (first revision)
| IS No. | Title | IS No. | Title |
| 2386 | Methods of test for aggregates for concrete | 16415 : 2015 | Specification for composite cement |
| (Part 1) : 1963 | Particle size and shape | c) Supplementary Cementitious Materials (Mineral Admixtures including Pozzolanas) | |
| (Part 2) : 1963 | Estimation of deleterious materials and organic impurities | IS No. | Title |
| (Part 3) : 1963 | Specific gravity, density, voids, absorption and bulking | 1344 : 1981 | Specification for calcined clay pozzolana (second revision) |
| (Part 4) : 1963 | Mechanical properties | 1727 : 1967 | Methods of test for pozzolanic materials (first revision) |
| (Part 5) : 1963 | Soundness | 3812 | Specification for pulverized fuel ash |
| (Part 6) : 1963 | |||
| Measuring mortar making properties of fine aggregates |
| (Part 1) : 2013 |
| For use as pozzolana in cement, cement mortar and concrete (third revision) |
| (Part 7) : 1963 | Alkali aggregate reactivity | (Part 2) : 2013 | For use as admixture in cement mortar and concrete (third revision) |
| (Part 8) : 1963 | Petrographic examination |
| 2430 : 1986 | Methods of sampling of aggregates of concrete (first revision) | 6491 : 1972 | Method of sampling of flyash |
| 6579 : 1981 | Specification for coarse aggregate for water bound macadam (first revision) | 12089 : 1987 | Specification for granulated slag for manufacture of Portland slag cement |
| 9142 : 1979 | Specification for artificial light-weight aggregates for concrete masonry units | 12870 : 1989 | Methods of sampling calcined clay pozzolana |
| b) Cement | 15388 : 2003 | Specification for silica fume |
| 16354 : 2015 | Specification for metakaolin for use in cement, cement mortar and concrete |
| IS No. | Title | d) Chemical Admixtures | |
| 269 : 2015 | Specification for ordinary Portland cement (sixth revision) | IS No. | Title |
| 455 : 2015 | Specification for Portland slag cement (fifth revision) | 6925 : 1973 | Methods of test for determination of water soluble chlorides in concrete admixtures |
| 1489 | Specification for Portland pozzolana cement | 9103 : 1999 | Specification for admixtures for concrete (first revision) |
| (Part 1) : 2015 | Flyash based (fourth revision) |
| (Part 2) : 2015 | Calcined clay based (fourth revision) | e) Concrete | |
| 3466 : 1988 | Specification for masonry cement (second revision) | IS No. | Title |
| 6452 : 1989 | Specification for high alumina cement for structural use (first revision) | 456 : 2000 | Code of Practice for plain and reinforced concrete (fourth revision) |
| 6909 : 1990 | Specification for supersulphated cement (first revision) | 1343 : 2012 | Code of Practice for prestressed concrete (second revision) |
| 8041 : 1990 | Specification for rapid hardening Portland cement (second revision) | 4926 : 2003 | Code of Practice for ready-mixed concrete (second revision) |
| 8042 : 2015 | Specification for white Portland cement (third revision) | f) Cement and Concrete Sampling and Methods of Test | |
| 8043 : 1991 | Specification for hydrophobic Portland cement (second revision) | IS No. | Title |
| 12330 : 1988 | Specification for sulphate resisting Portland cement | 516 : 1959 | Methods of test for strength of concrete |
| 12600 : 1989 | Specification for low heat Portland cement | 1199 : 1959 | Methods of sampling and analysis of concrete |
| 2770 (Part 1) : 1967 | Methods of testing bond in reinforced concrete: Pullout test |
| IS No. | Title | IS No. | Title |
| 3085 : 1965 | Methods of test for permeability of cement mortar and concrete | 9013 : 1978 | Method of making, curing and determining compressive strength of accelerated cured concrete test specimens |
| 3535 : 1986 | Methods of sampling hydraulic cement (first revision) | ||
| 4031 | Methods of physical tests for hydraulic cement | 9284 : 1979 | Method of test for abrasion resistance of concrete |
| (Part 1) : 1996 | Determination of fineness by dry sieving (second revision) | 12423 : 1988 | Methods for colorimetric analysis of hydraulic cement |
| (Part 2) : 1999 | Determination of fineness by specific surface by Blaine air permeability method (second revision) | 12803 : 1989 | Methods of analysis of hydraulic cement by X-ray fluorescence spectrometer |
| (Part 3) : 1988 | Determination of soundness (first revision) | 12813 : 1989 | Method of analysis of hydraulic cement by atomic absorption spectrophotometer |
| (Part 4) : 1988 | Determination of consistency of standard cement paste (first revision) | 13311 | Methods of non-destructive testing of concrete |
| (Part 5) : 1988 | Determination of initial and final setting times (first revision) | (Part 1) : 1992 | Ultrasonic pulse velocity |
| (Part 2) : 1992 | Rebound hammer | ||
| (Part 6) : 1988 | Determination of compressive strength of hydraulic cement (other than masonry cement)(first revision) | 14959 | Method of test for determination of water soluble and acid soluble chlorides in mortar and concrete |
| (Part 7) : 1988 | Determination of compressive strength of masonry cement (first revision) | (Part 1) : 2001 | Fresh mortar |
| (Part 2) : 2001 | Hardened mortar and concrete | ||
| (Part 8) : 1988 | Determination of transverse and compressive strength of plastic mortar using prism (first revision) | g) Treatment of Concrete Joints | |
| IS No. | Title | ||
| (Part 9) : 1988 | Determination of heat of hydration (first revision) | 1834 : 1984 | Specification for hot applied sealing compound for joint in concrete (first revision) |
| (Part 10) : 1988 | Determination of drying shrinkage (first revision) | 1838 | Specification for preformed fillers for expansion joint in concrete pavements and structures (non extruding and resilient type) |
| (Part 11) : 1988 | Determination of density (first revision) | ||
| (Part 12) : 1988 | Determination of air content of hydraulic cement mortar (first revision) | (Part 1) : 1983 | Bitumen impregnated fibre (first revision) |
| (Part 2) : 1984 | CNSL aldehyde resin and coconut pith | ||
| (Part 13) : 1988 | Measurement of water retentivity of masonry cement (first revision) | (Part 3) : 2011 | Polymer based |
| (Part 14) : 1989 | Determination of false set | 10566 : 1983 | Methods of test for preformed fillers for expansion joints in concrete paving and structural construction |
| (Part 15) : 1991 | Determination of fineness by wet sieving | 11433 | Specification for one grade polysulphide based joint sealant |
| 4032 : 1985 | Methods of chemical analysis for hydraulic cement (first revision) | (Part 1) : 1985 | General requirements |
| 5816 : 1999 | Method of test for splitting tensile strength of concrete (first revision) | (Part 2) : 1986 | Methods of test |
| 8142 : 1976 | Methods of test for determining setting time of concrete by penetration resistance | 12118 | Specification for two parts polysulphide based sealants |
| (Part 1) : 1987 | General requirements | ||
| (Part 2) : 1987 | Methods of test | ||
h) Steel Reinforcement and Prestressing Steel for Concrete
IS No. Title
432 Specification for mild steel and medium tensile steel bars and hard drawn steel wire for concrete reinforcement
(Part 1): 1982 Mild steel and medium tensile steel bars (third revision)
(Part 2): 1982 Hard drawn steel wire (third revision)
1566 : 1982 Specification for hard drawn steel wire fabric for concrete reinforcement (second revision)
1608 : 2005 Metallic materials — Tensile testing at ambient temperature (third revision) 1785 Specification for plain hard drawn steel wire for pre-stressed concrete
(Part 1): 1983 Cold drawn stress-relieved wire (second revision)
(Part 2): 1983 As drawn wire (first revision)
1786 : 2008 Specification for high strength deformed steel bars and wires for concrete reinforcement (fourth revision)
2090 : 1983 Specification for high tensile steel bars used in prestressed concrete (first revision)
6003 : 2010 Specification for indented wire for prestressed concrete (second revision)
6006 : 2014 Specification for uncoated stress-relieved strand for prestressed concrete (second revision) 10790 Methods of sampling of steel for prestressed and reinforced concrete
(Part 1): 1984 Prestressing steel
(Part 2): 1984 Reinforcing steel
13620 : 1993 Specification for fusion bonded epoxy coated reinforcing bars
14268 : 1995 Specification for uncoated stress relieved low relaxation seven ply strand for prestressed concrete
16172 : 2014 Specification for reinforcement couplers for mechanical splices of bars in concrete
a) Cement Matrix Products
i) Precast Concrete Products
IS No. Title
2174 : 1962 Specification for reinforced concrete dust bins
2185 Specification for concrete masonry units
(Part 1): 2005 Hollow and solid concrete blocks (third revision)
(Part 2): 1983 Hollow and solid lightweight concrete blocks (first revision)
(Part 3): 1984 Autoclaved cellular (aerated) concrete blocks (first revision)
(Part 4): 2008 Cellular concrete blocks using preformed foam
4996 : 1984 Specification for reinforced concrete fence posts (first revision)
5751 : 1984 Specification for precast concrete coping blocks (first revision)
5758 : 1984 Specification for precast concrete kerbs (first revision)
5820 : 1970 Specification for precast concrete cable covers
6072 : 1971 Specification for autoclaved reinforced cellular concrete wall slabs
6073 : 2006 Specification for autoclaved reinforced cellular concrete floor and roof slabs (first revision)
6441 Methods of test for autoclaved cellular concrete products
(Part 1): 1972 Determination of unit weight or bulk density and moisture content
(Part 2): 1972 Determination of drying shrinkage
(Part 4): 1972 Corrosion protection of steel reinforcement in autoclaved cellular concrete
(Part 5): 1972 Determination of compressive strength
(Part 6): 1973 Strength, deformation and cracking of flexural members subject to bending — Short duration loading test
(Part 7): 1973 Strength, deformation and cracking of flexural members subject to bending — Sustained loading test
(Part 8): 1973 Loading tests for flexural members in diagonal tension
(Part 9): 1973 Jointing of autoclaved cellular concrete elements
6523 : 1983 Specification for precast reinforced concrete door and window frames (first revision)
IS No. Title
9375 : 1979 Specification for precast reinforced concrete plant guards
9872 : 1981 Specification for precast concrete septic tanks
9893 : 1981 Specification for precast concrete blocks for lintels and sills
12440 : 1988 Specification for precast concrete stone masonry blocks
12592 : 2002 Specification for precast concrete manhole covers and frames (first revision)
13356 : 1992 Specification for precast ferrocement water tanks (250 to 10 000 litres capacity)
13990 : 1994 Specification for precast reinforced concrete planks and joists for flooring and roofing
14143 : 1994 Specification for prefabricated brick panel and partially precast concrete joist for flooring and roofing
14201 : 1994 Specification for precast reinforced concrete channel unit for construction of floors and roofs
14241 : 1995 Specification for precast L-Panel units for roofing
ii) Asbestos Fibre Cement Products IS No. Title
459 : 1992 Specification for corrugated and semi-corrugated asbestos cement sheets (third revision)
1592 : 2003 Specification for asbestos cement pressure pipes and joints (fourth revision)
1626 Specification for asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fittings
(Part 1): 1994 Pipes and pipe fittings (second revision)
(Part 2): 1994 Gutters and gutter fittings (second revision)
(Part 3): 1994 Roofing fittings (second revision)
2096 : 1992 Specification for asbestos cement flat sheets (first revision)
2098 : 1997 Specification for asbestos cement building boards (first revision)
5913 : 2003 Methods of test for asbestos cement products (second revision)
6908 : 1991 Specification for asbestos cement
pipes and fittings for sewerage and drainage (first revision)
7639 : 1975 Method of sampling asbestos cement products
9627 : 1980 Specification for asbestos cement pressure pipes (light duty)
13000 : 1990 Specification for silica-asbestos- cement flat sheets
13008 : 1990 Specification for shallow corrugated asbestos cement sheets
iii) Other Fibre Cement Products IS No. Title
14862 : 2000 Specification for fibre cement flat sheets
14871 : 2000 Specification for products in fibre reinforced cement long corrugated or asymmetrical section sheets and fittings for roofing and cladding
iv) Concrete Pipes and Pipes Lined/Coated with Concrete or Mortar IS No. Title
458 : 2003 Specification for precast concrete pipes (with and without reinforcement) (fourth revision)
784 : 2001 Specification for prestressed concrete pipes (including specials) (second revision)
1916 : 1989 Specification for steel cylinder pipe with concrete lining and coating (first revision)
3597 : 1998 Methods of test for concrete pipes (second revision)
4350 : 1967 Specification for concrete porous pipes for under drainage
7319 : 1974 Specification for perforated concrete pipes
7322 : 1985 Specification for specials for steel cylinder reinforced concrete pipes (first revision)
15155 : 2002 Specification for bar/wire wrapped steel cylinder pipe with mortar lining and coating
b) Resin Matrix Products IS No. Title
1998 : 1962 Methods of test for thermosetting synthetic resin bonded laminated sheets
2036 : 1995 Specification for phenolic laminated sheets (second revision)
IS No. Title
2046 : 1995 Specification for decorative thermosetting synthetic resin bonded laminated sheets (second revision)
IS No. Title
694 : 2010 Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 V (fourth revision)
1554 Specification for PVC insulated (heavy duty) electric cables
(Part 1): 1988 For working voltages up to and including 1 100 volts (third revision)
(Part 2): 1988 For working voltages from 3.3 kV up to and including 11 kV (second revision)
3961 Recommended current rating for cables
(Part 1): 1967 Paper-insulated lead-sheathed cables
(Part 2): 1967 PVC-insulated and PVC-sheathed heavy duty cables
(Part 3): 1968 Rubber insulated cables
(Part 5) : 1968 PVC insulated light duty cables 4289 Specification for flexible cables for lifts and other flexible connections
(Part 1): 1984 Elastomer insulated cables (first revision)
(Part 2) : 2000 PVC insulated circular cables 7098 Specification for cross-linked polyethylene insulated sheathed cables
(Part 1): 1988 For working voltage up to and including 1 100 V (first revision)
(Part 2) : 2011 For working voltages form 3.3 kV up to and including 33 kV (second revision)
(Part 3): 1993 For working voltages from 66 kV upto and including 220 kV
8130 : 2013 Specification for conductors for insulated electric cables and flexible cords (second revision)
9968 Specification for elastomer-insulated cables
(Part 1): 1988 For working voltages up to and including 1 100 V (first revision)
IS No. Title
(Part 2): 2002 For working voltages from 3.3 kV up to and including 33 kV (first revision) 10810 Methods of test for cables
(Part 0): 1984 General
(Part 1): 1984 Annealing test for wires used in conductors
(Part 2): 1984 Tensile test for aluminium wires
(Part 3): 1984 Wrapping test for aluminium wires
(Part 4): 1984 Persulphate test of conductor
(Part 5): 1984 Conductor resistance test
(Part 6): 1984 Thickness of thermoplastic and elastomeric insulation and sheath
(Part 7): 1984 Tensile strength and elongation at break of thermoplastic and elastomeric insulation and sheath
(Part 8): 1984 Breaking strength and elongation at break for impregnated paper insulation
(Part 9): 1984 Tear resistance for paper insulation
(Part 10): 1984 Loss of mass test
(Part 11): 1984 Thermal ageing in air
(Part 12): 1984 Shrinkage test
(Part 13): 1984 Ozone resistance test
(Part 14): 1984 Heat shock test
(Part 15): 1984 Hot deformation test
(Part 16): 1986 Accelerated ageing test by oxygen pressure method
(Part 17): 1986 Tear resistance test for heavy duty sheath
(Part 19): 1984 Bleeding and blooming test
(Part 20): 1984 Cold bend test
(Part 21): 1984 Cold impact test
(Part 22): 1984 Vicat softening point
(Part 23): 1984 Melt-flow index
(Part 24): 1984 Water soluble impurities test of insulating paper
(Part 25): 1984 Conductivity of water extract test of insulating paper
(Part 26): 1984 pH value of water extract test of insulating paper
(Part 27): 1984 Ash content test of insulating paper
(Part 28): 1984 Water absorption test (Electrical)
(Part 29): 1984 Environmental stress cracking test
(Part 30): 1984 Hot set test
IS No. Title
(Part 31): 1984 Oil resistance test
(Part 32): 1984 Carbon content test for polyethylene
(Part 33): 1984 Water absorption test (Gravimetric)
(Part 34): 1984 Measurement of thickness of metallic sheath
(Part 35): 1984 Determination of tin in lead alloy for sheathing
(Part 36): 1984 Dimensions of armouring material
(Part 37): 1984 Tensile strength and elongation at break of armouring materials
(Part 38) : 1984 Torsion test on galvanized steel wires for armouring
(Part 39): 1984 Winding test on galvanized steel strips for armouring
(Part 40): 1984 Uniformity of zinc coating on steel armour
(Part 41): 1984 Mass of zinc coating on steel armour
(Part 42): 1984 Resistivity test of armour wires and strips and conductance test of armour (wires/strips)
(Part 43): 1984 Insulation resistance
(Part 44): 1984 Spark test
(Part 45): 1984 High voltage test
(Part 46): 1984 Partial discharge test
(Part 47): 1984 Impulse test
(Part 48): 1984 Dielectric power factor test
(Part 49): 1984 Heating cycle test
(Part 50): 1984 Bending test
(Part 51): 1984 Dripping test
(Part 52): 1984 Drainage test
(Part 53): 1984 Flammability test
(Part 54): 1984 Static flexibility test
(Part 55): 1986 Abrasion test
(Part 56): 1987 Accelerated ageing by the air-pressure method
(Part 57): 1987 Flexing test
(Part 58): 1998 Oxygen index test
(Part 59): 1988 Determination of the amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
(Part 60): 1988 Thermal stability of PVC insulation and sheath
(Part 61): 1988 Flame retardant test
(Part 62): 1993 Fire resistance test for bunched cables
(Part 63): 1993 Smoke density of electric cables under fire conditions
IS No. Title
(Part 64) : 2003 Measurement of temperature index 12943 : 1990 Brass glands for PVC cables
a) Wooden Doors, Windows and Ventilators
IS No. Title
1003 Specification for timber panelled and glazed shutters
(Part 1): 2003 Door shutters (fourth revision)
(Part 2): 1994 Window and ventilator shutters (third revision)
2191 Specification for wooden flush door shutters (cellular and hollow core type)
(Part 1): 1983 Plywood face panels (fourth revision)
(Part 2): 1983 Particle board face panels and hardboard face panels (third revision) 2202 Specification for wooden flush door shutters (solid core type)
(Part 1): 1999 Plywood face panels (sixth revision)
(Part 2): 1983 Particle board face panels and hardboard face panels (third revision) 4020 Method of tests for door shutters
(Part 1): 1998 General (third revision)
(Part 2): 1998 Measurement of dimensions and squareness (third revision)
(Part 3): 1998 Measurement of general flatness (third revision)
(Part 4): 1998 Local planeness test (third revision)
(Part 5): 1998 Impact indentation test (third revision)
(Part 6): 1998 Flexure test (third revision)
(Part 7): 1998 Edge loading test (third revision)
(Part 8): 1998 Shock resistance test (third revision)
(Part 9): 1998 Buckling resistance test (third revision)
(Part 10): 1998 Slamming test (third revision)
(Part 11): 1998 Misuse test (third revision)
(Part 12): 1998 Varying humidity test (third revision)
(Part 13): 1998 End immersion test (third revision)
(Part 14): 1998 Knife test (third revision)
(Part 15): 1998 Glue adhesion test (third revision)
(Part 16): 1998 Screw withdrawal resistance test (third revision)
4021:1995 Specification for timber door, window and ventilator frames
IS No. Title
6198 : 1992 Specification for ledged, braced and battened timber shutters (second revision)
b) Metal Doors, Windows and Ventilators IS No. Title
1038 : 1983 Specification for steel doors, windows and ventilators (third revision)
1361 : 1978 Specification for steel windows for industrial buildings (first revision)
1948 : 1961 Specification for aluminium doors, windows and ventilators
1949 : 1961 Specification for aluminium windows for industrial buildings
4351 : 2003 Specification for steel door frames (second revision)
6248 : 1979 Specification for metal rolling shutters and rolling grills (first revision)
7452 : 1990 Specification for hot rolled steel sections for doors, windows and ventilators (second revision)
10451 : 1983 Specification for steel sliding shutters (top hung type)
10521 : 1983 Specification for collapsible gates
c) Plastic Doors and Windows IS No. Title
14856 : 2000 Specification for glass fibre reinforced (GRP) panel type door shutters for internal use
15380 : 2003 Specification for moulded raised high density fibre (HDF) panel doors
15931 : 2012 Specification for solid panel foam UPVC door shutters
d) Concrete Door and Window Frames IS No. Title
6523 : 1983 Specification for precast reinforced concrete door and window frames (first revision)
e) Other Composite Material Doors and Windows IS No. Title
16073 : 2013 Specification for bamboo-jute composite panel door shutter
16074 : 2014 Specification for steel flush door shutters
16096 : 2013 Specification for phenol bonded bamboo-jute composite hollow door shutter
f) Fire Check Doors IS No. Title
3614 Specification for fire-check doors
(Part 1): 1966 Plate, metal covered and rolling type
(Part 2) : 1992 Metallic and non-metallic fire check doors — Resistance test and performance criteria
g) Mesh/Net for Mosquito/Vector Prevention IS No. Title
1568 : 1970 Specification for wire cloth for general purposes (first revision)
3150 : 1982 Specification for hexagonal wire netting for general purposes (second revision)
11199 : 1985 Specification for HDPE monofilament twine door nets
IS No. Title
371 : 1999 Specification for ceiling roses (third revision)
374 : 1979 Specification for electric ceiling type fans and regulators (third revision)
418 : 2004 Specification for tungsten filament lamp for domestic and similar general lighting purposes (fourth revision)
1258 : 2005 Specification for bayonet lamp holders (fourth revision)
1293 : 2005 Specification for plugs and socket-outlets of rated voltage up to and including 250 volts and rated current up to and including 16 amperes (third revision)
1554 PVC insulated (heavy duty) electric cables
(Part 1): 1988 For working voltages upto and including 1 100 V (third revision)
(Part 2): 1988 For working voltages from 3.3 kV upto and including 11 kV (second revision)
2086 : 1993 Specification for carriers and bases used in re-wirable type electric fuses up to 650 volts (third revision)
2206 (Part 1) : Specification for flameproof electric lighting fittings: Well glass and bulkhead types (first revision) 1984
| IS No. | Title | IS No. | Title |
| 2215 : 2006 | Specification for starters for fluorescent lamps (third revision) | (Part 1) : 1980 | General requirements |
| 2215 : 2006 | Specification for starters for fluorescent lamps (third revision) | (Part 2) : 1981 | Rigid steel conduits |
| 2412 : 1975 | Specification for link clips for electrical wiring (first revision) | (Part 3) : 1983 | Rigid plain conduits for insulating materials |
| 2418 | Specification for tubular fluorescent lamps for general lighting services | (Part 4) : 1983 | Pliable self-recovering conduits for insulating materials |
| (Part 1) : 1977 | Requirements and tests (first revision) | (Part 5) : 2000 | Pliable conduits of insulating materials |
| (Part 2) : 1977 | Standard lamp data sheets (first revision) | (Part 6) : 2000 | Pliable conduits of metal or composite materials |
| (Part 3) : 1977 | Dimensions of G-5 and G-13 bi-pin caps (first revision) | (Part 8) : 2003 | Rigid non threadable conduits of aluminium alloy |
| (Part 4) : 1977 | Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision) | 9926 : 1981 | Specification for fuse wires used in rewirable type electric fuses up to 650 volts |
| 2675 : 1983 | Specification for enclosed distribution fuseboards and cutouts for voltages not exceeding 1 000 V (second revision) | 10322 | Specification for luminaires |
| 2675 : 1983 | Specification for enclosed distribution fuseboards and cutouts for voltages not exceeding 1 000 V (second revision) | (Part 1) : 2014 | General requirements and tests (first revision) |
| 3323 : 1980 | Specification for bi-pin lamp holders for tubular fluorescent lamps (first revision) | (Part 2) : 1982 | Constructional requirements |
| 3323 : 1980 | Specification for bi-pin lamp holders for tubular fluorescent lamps (first revision) | (Part 3) : 1984 | Screw and screwless terminations |
| 3324 : 1982 | Specification for holders for starters for tubular fluorescent lamps (first revision) | (Part 4) : 1984 | Methods of tests |
| 3324 : 1982 | Specification for holders for starters for tubular fluorescent lamps (first revision) | (Part 5/Sec 1) : 2012 | Particular requirements, Section 1 General purpose luminaires (first revision) |
| 3419 : 1988 | Specification for fittings for rigid non-metallic conduits (second revision) | (Part 5/Sec 2) : 2012 | Particular requirements, Section 2 Recessed luminaires (first revision) |
| 3480 : 1966 | Specification for flexible steel conduits for electrical wiring | (Part 5/Sec 3) : 2012 | Particular requirements, Section 3 Luminaires for road and street lighting (first revision) |
| 3528 : 1966 | Specification for waterproof electric lighting fittings | (Part 5/Sec 4) : 1987 | Particular requirements, Section 4 Portable general purpose luminaires |
| 3553 : 1966 | Specification for watertight electric lighting fittings | (Part 5/Sec 5) : 2013 | Particular requirements, Section 5 Flood light (first revision) |
| 3837 : 1976 | Specification for accessories for rigid steel conduits for electrical wiring (first revision) | (Part 5/Sec 6) : 2013 | Particular requirements, Section 6 Hand lamps |
| 3854 : 1997 | Specification for switches for domestic and similar purposes (second revision) | (Part 5/Sec 7) : 2013 | Particular requirements, Section 7 Lighting chains |
| 4160 : 2005 | Specification for interlocking switch socket outlets (first revision) | (Part 5/Sec 8) : 2013 | Particular requirements, Section 8 Emergency lighting |
| 4649 : 1968 | Specification for adaptors for flexible steel conduits | 11037 : 1984 | Electronic type fan regulators |
| 4649 : 1968 | Specification for adaptors for flexible steel conduits | 12449 | Starting devices (other than glow starters) |
| 5077 : 1969 | Specification for decorative lighting outfits | (Part 1) : 1988 | General and safety requirements |
| 8030 : 1976 | Specification for luminaires for hospitals | (Part 2) : 1988 | Performance requirements |
| 9537 | Specification for conduits for electrical installations | 12776 : 2002 | Specification for galvanized strand for earthing (first revision) |
| IS No. | Title | IS No. | Title |
| 13010 : 2002 | AC watt-hour meters, Class 0.5, 1 and 2 (first revision) | 16102 | Self ballasted LED-lamps for general lighting services |
| 13779 : 1999 | AC static watthour meters (Class 1 and 2) (first revision) | (Part 1) : 2012 | Safety requirements |
| 13779 : 1999 | AC static watthour meters (Class 1 and 2) (first revision) | (Part 2) : 2012 | Performance requirements |
| 13947 (Part 5/Sec 2) : 2004 | Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches | 16103 | LED modules for general lighting |
| 13947 (Part 5/Sec 2) : 2004 | Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches | (Part 1) : 2012 | Safety specification |
| 13947 (Part 5/Sec 2) : 2004 | Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches | (Part 2) : 2012 | Performance requirements |
| 13947 (Part 5/Sec 2) : 2004 | Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches | 16148 : 2014 | Performance specification for metal halide lamps |
| 14763 : 2000 | Conduit for electrical purposes, outside diameters of conduits for electrical installations and threads for conduits and fittings | 16246: 2015 | Specification for elastomer insulated cables with limited circuit integrity when affected by fire |
| 14768 | Conduit fittings for electrical installations | IS/IEC 60079-1: 2007 | Explosive atmospheres — Part 1 : Equipment protection by flameproof enclosures “d” |
| (Part 1) : 2000 | General requirements | IS/IEC 60898-1: 2002 | Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for ac operation |
| (Part 2) : 2003 | Metal conduit fittings | IS/IEC 60898-1: 2002 | Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for ac operation |
| 14772 : 2000 | Enclosures for accessories for household and similar fixed electrical installations | IS/IEC 60898-1: 2002 | Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for ac operation |
| 14927 | Cable trunking and ducting systems for electrical installations | IS/IEC 60947-1: 2007 | Low voltage switchgear and controlgear — Part 1: General rules (first revision) |
| (Part 1) : 2001 | General requirements | IS/IEC 60947-2: 2003 | Low voltage switchgear and controlgear — Part 2: Circuit breakers |
| (Part 2) : 2001 | Cable trunking and ducting systems intended for mounting on walls or ceilings | IS/IEC 60947-2: 2003 | Low voltage switchgear and controlgear — Part 2: Circuit breakers |
| 14930 | Conduit systems for electrical installations | IS/IEC 60947-3: 1999 | Low voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units |
| (Part 1) : 2001 | General requirements | IS/IEC 60947-3: 1999 | Low voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units |
| (Part 2) : 2001 | Particular requirements for conduit system buried underground | IS/IEC 60794-1-1: 2001 | Optical fibre cables — Part 1: Generic specification, Section 1 General |
| 15111 | Self ballasted lamps for general lighting services: | IS/IEC 60794-1-2 : 2003 | Optical fibre cables — Part 1: Generic specification, Section 2 Basic optical cable test procedures |
| (Part 1) : 2002 | Safety requirements | IS/IEC 60794-1-2 : 2003 | Optical fibre cables — Part 1: Generic specification, Section 2 Basic optical cable test procedures |
| (Part 2) : 2002 | Performance requirements | IS/IEC 60794-2: 2002 | Optical fibre cables — Part 2 Sectional specification for indoor cables |
| 15368 : 2003 | Cable reels for household and similar purposes | IS/IEC 60794-2: 2002 | Optical fibre cables — Part 2 Sectional specification for indoor cables |
| 15518 (Part 1) : 2004 | Safety requirements for incandescent lamps: Part 1 Tungsten filament | 13. FILLERS, STOPPERS AND PUTTIES | 13. FILLERS, STOPPERS AND PUTTIES |
| 15518 (Part 1) : 2004 | Safety requirements for incandescent lamps: Part 1 Tungsten filament | IS No. | Title |
| 15518 (Part 1) : 2004 | lamps for domestic and similar general lighting purposes | 110 : 1983 | Specification for ready mixed paint, brushing, grey filler, for enamels, for use over primers (second revision) |
| 15787 : 2008 | Switch-socket-outlets (non-interlock type) | 419 : 1967 | Specification for putty for use on window frames (first revision) |
| 15968 : 2013 | Ballasts for tubular fluorescent lamps — Performance requirements | 423 : 1961 | Specification for plastic wood, for joiner's filler (revised) |
| 15974 : 2013 | Auxiliaries for lamps — Starting devices (other than glow starters) — Performance requirements | 3709 : 1966 | Specification for mastic cement for bedding of metal windows |
IS No. Title
7164 : 1973 Specification for stopper
13184 : 1991 Specification for mastic filler, epoxy based (two pack)
a) Concrete Flooring IS No. Title
1237 : 2012 Specification for cement concrete flooring tiles (second revision)
6073 : 2006 Specification for autoclaved reinforced cellular concrete floor and roof slabs (first revision)
13801 : 2013 Specification for chequered cement concrete tiles (first revision)
13990 : 1994 Specification for precast reinforced concrete planks and joists for flooring and roofing
14201 : 1994 Specification for precast reinforced concrete channel units for construction of floors and roofs
15658 : 2006 Specification for precast concrete blocks for paving
b) Flooring Compositions IS No. Title
657 : 1982 Specification for materials for use in the manufacture of magnesium oxychloride flooring compositions (second revision)
9162 : 1979 Methods of tests for epoxy resin, hardeners and epoxy resin composition for floor topping
9197 : 1979 Specification for epoxy resin, hardness and epoxy resin compositions for floor topping
10132 : 1982 Method of test for materials for use in the preparation of magnesium oxychloride flooring composition
c) Linoleum Flooring IS No. Title
653 : 1992 Specification for linoleum sheets and tiles (third revision)
9704 : 1980 Methods of tests for linoleum sheets and tiles
d) Rubber Flooring IS No. Title
e) Stone Flooring IS No. Title
1128 : 1974 Specification for limestone (slab and tiles) (first revision)
1130 : 1969 Specification for marble (blocks, slabs and tiles)
3316 : 1974 Specification for structural granite (first revision)
3622 : 1977 Specification for sand stone (slabs and tiles) (first revision)
14223 (Part 1): Specification for polished building 1994 stones: Part 1 Granite
f) Bituminous Flooring IS No. Title
1195 : 2002 Specification for bitumen mastic for flooring (third revision)
5317 : 2002 Specification for pitch-mastic for bridge decking and roads (second revision)
8374 : 1977 Specification for bitumen mastic, anti-static and electrically conducting grade
9510 : 1980 Specification for bitumen mastic acid resisting grade
13026 : 1991 Specification for bitumen mastic for flooring for industries handling LPG and other light hydrocarbon products
15194 : 2002 Specification for pitch-mastic flooring for industries handling heavy hydrocarbon products like kerosene, diesel and furnace oil
g) Plastic Flooring IS No. Title
3461 : 1980 Specification for PVC asbestos floor tiles (first revision)
3462 : 1986 Specification for unbacked flexible PVC flooring (second revision)
3464 : 1986 Methods of test for plastic flooring and wall tiles (second revision)
h) Ceramic/Vitreous Flooring and Wall Finishing IS No. Title
2333 : 1992 Specification for plaster of Paris for ceramic industry (second revision)
4457 : 2007 Specification for ceramic unglazed vitreous acid resisting tile (second revision)
13630 Ceramic tiles — Methods of test, sampling and basis for acceptance
(Part 1): 2006 Determination of dimensions and surface quality (first revision)
(Part 2): 2006 Determination of water absorption and bulk density (first revision)
(Part 3) : 2006 Determination of moisture expansion using boiling water — Unglazed tiles (first revision)
(Part 4): 2006 Determination of linear thermal expansion (first revision)
(Part 5): 2006 Determination of resistance to thermal shock (first revision)
(Part 6): 2006 Determination of modulus of rupture and breaking strength (first revision)
(Part 7): 2006 Determination of chemical resistance — Unglazed tiles (first revision)
(Part 8): 2006 Determination of chemical resistance — Glazed tiles (first revision)
(Part 9): 2006 Determination of crazing resistance — Glazed tiles (first revision)
(Part 10): 2006 Determination of frost resistance (first revision)
(Part 11): 2006 Determination of resistance to surface abrasion — Glazed tiles (first revision)
(Part 12): 2006 Determination of resistance to deep abrasion — Unglazed tiles (first revision)
(Part 13): 2006 Determination of scratch hardness of surface according to Mohs'(first revision)
(Part 14): 2006 Determination of impact resistance by measurement of coefficient of restitution
(Part 15): 2006 Ceramic tiles — Sampling and basis for acceptance
13712 : 2006 Ceramic tiles — Definitions, classifications, characteristics and marking (first revision)
15622 : 2006 Specification for pressed ceramic tiles
j) Clay Flooring IS No. Title
1478 : 1992 Specification for clay flooring tiles (second revision)
3951 Specification for hollow clay tiles for floor and roofs
(Part 1): 2009 Filler type (second revision)
(Part 2): 2009 Structural type (second revision)
k) Roofing IS No. Title
277 : 2003 Galvanized steel sheets (plain and corrugated) —Specification (sixth revision)
459 : 1992 Specification for corrugated and semi-corrugated asbestos cement sheets (third revision)
654 : 1992 Specification for clay roofing tiles, Mangalore pattern (third revision)
1464 : 1992 Specification for clay ridge and ceiling tiles (second revision) 2690 Specification for burnt clay flat terracing tiles
(Part 1): 1993 Machine made (second revision)
(Part 2): 1992 Handmade (second revision)
3951 Specification for hollow clay tiles for floor and roofs
(Part 1): 2009 Filler type (second revision)
(Part 2): 2009 Structural type (second revision)
6073 : 2006 Specification for autoclaved reinforced cellular concrete floor and roof slabs (first revision)
6250 : 1981 Specification for roofing slate tiles (first revision)
10388 : 1982 Specification for corrugated coir wood wool cement roofing sheets
12583 : 1988 Specification for corrugated bitumen roofing sheets
12866 : 1989 Specification for plastic translucent sheets made from thermosetting polyester resin (glass fibre reinforced)
13317 : 1992 Specification for clay roofing country tiles, half round and flat tiles
13990 : 1994 Specification for precast reinforced concrete planks and joists for flooring and roofing
14201 : 1994 Specification for precast reinforced concrete channel units for construction of floors and roofs
14241 : 1995 Specification for precast L-Panel units for roofing
m) Other Floorings and Roofings IS No. Title
4456 Methods of test for chemical resistant mortars
(Part 1): 1967 Silicate type and resin type
(Part 2): 1967 Sulphur type
IS No. Title
4457 : 2007 Specification for ceramic unglazed vitreous acid resisting tile (second revision)
4832 Specification for chemical resistant mortars
(Part 1): 1969 Silicate type
(Part 2): 1969 Resin type
(Part 3): 1968 Sulphur type
4860 : 1968 Specification for acid resistant bricks
14862 : 2000 Specification for fibre cement flat sheets
14143 : 1994 Specification for prefabricated brick panel and partially precast concrete joist for flooring and roofing
14871 : 2000 Specification for products in fibre reinforced cement — Long corrugated or asymmetrical section sheets and fittings for roofing and cladding
n) Wall Coverings/Finishing IS No. Title
1542 : 1992 Specification for sand for plaster (second revision)
3952 : 2013 Specification for burnt clay hollow bricks and blocks for walls and partitions (third revision)
4456 Methods of test for chemical resistant mortars
(Part 1): 1967 Silicate type and resin type
(Part 2): 1967 Sulphur type
4832 Specification for chemical resistant mortars
(Part 1): 1969 Silicate type
(Part 2): 1969 Resin type
(Part 3): 1968 Sulphur type
15418 : 2003 Specification for finished wall papers, wall vinyls and plastic wall coverings in roll form
2553 (Part 1): Specification for safety glass: Part 1 1990 General purpose (third revision)
2835 : 1987 Specification for flat transparent sheet glass (third revision)
3438 : 1994 Specification for silvered glass mirrors for general purposes (second revision)
IS No. Title
5437 : 1994 Specification for figured rolled and wired glass (first revision)
14900 : 2000 Specification for transparent float glass
2095 Specification for gypsum plaster boards
(Part 1): 2011 Plain gypsum plaster boards (third revision)
(Part 2): 2001 Coated/laminated gypsum plaster boards (second revision)
(Part 3): 1996 Reinforced gypsum plaster boards (second revision)
2542 Methods of test for gypsum plaster, concrete and products
(Part 1/Sec 1): Plaster and concrete, Section 1 1978 Normal consistency of gypsum plaster (first revision)
(Part 1/Sec 2): Plaster and concrete, Section 2 1978 Normal consistency of gypsum concrete (first revision)
(Part 1/Sec 3): Plaster and concrete, Section 3 1978 Setting time of plaster and concrete (first revision)
(Part 1/Sec 4): Plaster and concrete, Section 4 1978 Transverse strength of gypsum plaster (first revision)
(Part 1/Sec 5): Plaster and concrete, Section 5 1978 Compressive strength and dry set density of gypsum plaster (first revision)
(Part 1/Sec 6): Plaster and concrete, Section 6 1978 Soundness of gypsum plaster (first revision)
(Part 1/Sec 7): Plaster and concrete, Section 7 1978 Mechanical resistance of gypsum plaster by dropping ball test (first revision)
(Part 1/Sec 8): Plaster and concrete, Section 8 1978 Freedom from coarse particles (first revision)
(Part 1/Sec 9): Plaster and concrete, Section 9 1978 Expansion of plaster (first revision)
(Part 1/Sec 10): Plaster and concrete, Section 10 Sand 1978 in set plaster (first revision)
(Part 1/Sec 11): Plaster and concrete, Section 11 1978 Wood fibre content in gypsum plaster (first revision) NATIONAL BUILDING CODE OF INDIA 2016
(Part 1/Sec 12): Plaster and concrete, Section 12 Dry 1978 bulk density (first revision)
(Part 2/Sec 1): Gypsum products, Section 1 1981 Measurement of dimensions (first revision)
(Part 2/Sec 2): Gypsum products, Section 2 1981 Determination of mass (first revision)
(Part 2/Sec 3): Gypsum products, Section 3 1981 Determination of mass and thickness of paper surfacing (first revision)
(Part 2/Sec 4): Gypsum products, Section 4 1981 Transverse strength (first revision)
(Part 2/Sec 5): Gypsum products, Section 5 1981 Compressive strength (first revision)
(Part 2/Sec 6): Gypsum products, Section 6 Water absorption (first revision) 1981
(Part 2/Sec 7): Gypsum products, Section 7 1981 Moisture content (first revision)
(Part 2/Sec 8): Gypsum products, Section 8 Nail retention of precast reinforced gypsum slabs (first revision) 1981 2547 Specification for gypsum building plaster
(Part 1): 1976 Excluding premixed lightweight plaster (first revision)
(Part 2): 1976 Premixed lightweight plaster (first revision)
2849 : 1983 Specification for non-load bearing gypsum partition blocks (solid and hollow types) (first revision)
8272 : 1984 Specification for gypsum plaster for use in the manufacture of fibrous plasterboards (first revision)
9498 : 1980 Specification for inorganic aggregates for use in gypsum plaster
12679 : 1989 Specification for by-product gypsum for use in plaster, blocks and boards
2116 : 1980 Specification for sand for masonry mortars (first revision)
2250 : 1981 Code of Practice for preparation and use of masonry mortars (first revision)
3085 : 1965 Method of test for permeability of cement mortar and concrete
IS No. Title
4098 : 1983 Specification for lime-pozzolana mixture (first revision)
4456 Methods of test for chemical resistant mortars
(Part 1): 1967 Silicate type and resin type
(Part 2) : 1967 Sulphur type 4832 Chemical resistant mortars
(Part 1): 1969 Silicate type
(Part 2): 1969 Resin type
(Part 3): 1968 Sulphur type
13077 : 1991 Guide for preparation and use of mud mortar in masonry
14959 Method of test determination of water soluble and acid soluble chlorides in mortar and concrete
(Part 1): 2001 Fresh mortar and concrete
(Part 2): 2001 Hardened mortar and concrete