This Code (Part 5) lists Indian Standard specifications for materials used in building construction. The Indian Standards for methods of tests, to ensure the requirements demanded of the materials in the various situations, are also included. This is with a view to ensuring the quality and effectiveness of building materials used in the construction and of their storage, which are as important as other aspects of building activity like planning, designing and constructing the building itself.
Historically, choice of building materials was determined by what was locally available, appropriateness to geoclimatic conditions and affordability of users. In the recent past, different initiatives have been taken in the areas of research and development, standardization, and development and promotion of innovative materials. A review of the recent trends indicates that the growth in the area of building materials covers emerging trends and latest developments in the use of wastes, mineral admixtures in cement and concrete, substitutes to conventional timber, composite materials and recycling of wastes, at the same time ensuring desired response of materials in relation to fire safety, long term performance and durability. In addition to these, nowadays, development of specific materials is being researched which may be structured and designed to meet needs to specially developed construction technologies in time to come, such as, for disaster prone areas or aggressive climatic and industrial situations.
To encourage use of appropriate materials, it may be desirable to have to the largest extent possible, performance oriented approach for specifications rather than prescriptive approach. The approach has been already adopted in some cases in development of standards, wherever found possible.
Indian Standards cover the requirements for most of the materials in use. However, there may be a gap between development of new materials and techniques of application and formulation of standards. It, therefore, becomes necessary for a Building Code to be flexible to recognize building materials other than those for which Indian Standards are available. This Part of the Code, therefore, since its first version, duly takes care of this aspect and explicitly provides for use of new or alternate building materials, provided it is proved by authentic tests that the new or alternative material is effective and suitable for the purpose intended. However, it is worthwhile that more and more emphasis is given to the satisfaction of performance requirements expected of a building material, so that a wide range of such new or alternate materials can be evaluated and used, if found appropriate.
As already emphasized, quality of material is quite important for their appropriate usage, whether it is a material for which an Indian Standard is available or a new or alternative material as defined in 4 of this Part of the Code. While continuing to emphasize on conformity of building materials to available Indian Standards, this Part recommends that the building regulating authority may also recognize the use of building materials conforming to other specifications and test methods (see 4.2), in case Indian Standards are not available for particular materials. Third party certification schemes available in the country for quality assurance of above materials can be used with advantage to ensure the appropriateness of these materials.
It is well recognized that buildings during their construction and subsequently in their operation consume lot of resources. The holistic approach for ensuring proper and sustainable developments is to take care of the concerned aspects affecting sustainability during the conceptualization, planning, design, construction, and operation and maintenance stages. The building material production, transportation and utilization assume a substantial component of the embodied energy that goes into a building. It is therefore important that sustainability of building materials is well understood and ensured in a building project. This Part of the Code recognizes this aspect and covers appropriate provision therefore.
This Part of the Code was first published in 1970 and subsequently revised in 1983 and 2005 as Part 5 of NBC 2005. The first and second revision of this Part incorporated an updated version of the list of Indian Standards given at the end of this Part of the Code. Also the list of building materials was completely revised to make it more user-friendly. This second revision of this Part, while basically retaining the structure of 2005 version of the Code, incorporates the following modifications:
a) The clause on new/alternative materials has been extended to give examples of some potential new/alternative materials;
b) Recognizing the importance of sustainability in building construction and built environment, a new clause giving broad aspects relating to sustainable materials, has been added;
c) The list at the end of this Part has been updated to reflect the latest available Indian Standard specifications and methods of test.
d) In the above list, existing categories have been re-organized and some new categories have been added either under the existing principal categories or as separate principal categories. In the process, the categories such as, bricks, blocks and other masonry units; mortar (including sand for mortar); supplementary cementitious materials; mesh/net for mosquito/vector prevention; concrete door and window frame; other composite material doors and windows; fire check doors; stone flooring, etc, have been added.
e) The headings of some of the categories have been rechristened to more appropriately reflect the materials/products actually covered thereunder.
A reference to SP 21 : 2005 ‘Summaries of Indian Standards for Building Materials’ may be useful. This publication gives the summaries of Indian Standards covering various building materials, fittings and components except standards relating to paints.
All standards cross-referred in the main text of this Part, are subject to revision. The parties to agreement based on this Part are encouraged to investigate the possibility of applying the most recent editions of the standards.
For the purpose of deciding whether a particular requirement of this Part is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this Part.
d) Adhesives
d) Adhesives
IS No.
Title
4139 : 1989
Specification for calcium silicate bricks (second revision)
848 : 2006
Specification for synthetic resin adhesives for plywood (phenolic and aminoplastic) (second revision)
6932(Part 1) : 1973
Method of tests for building limesDetermination of insoluble residue, loss on ignition, insoluble matter, silicon dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide
849 : 1994
Specification for cold setting case in glue for wood (first revision)
851 : 1978
Specification for synthetic resin adhesives for construction work (non-structural) in wood (first revision)
(Part 2) : 1973
Determination of carbon dioxide content
852 : 1994
Specification for animal glue for general wood-working purposes (second revision)
(Part 3) : 1973
Determination of residue on slaking of quicklime
1508 : 1972
Specification for extenders for use in synthetic resin adhesives (urea-formaldehyde) for plywood (first revision)
(Part 4) : 1973
Determination of fineness of hydrated lime
(Part 5) : 1973
Determination of unhydrated oxide
(Part 6) : 1973
Determination of volume yield of quicklime
4835 : 1979
Specification for polyvinyl acetate dispersion-based adhesives for wood (first revision)
(Part 7) : 1973
Determination of compressive and transverse strength
9188 : 1979
Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition
(Part 8) : 1973
Determination of workability
(Part 9) : 1973
Determination of soundness
(Part 10) : 1973
Determination of popping and pitting of hydrated lime
12830 : 1989
Rubber based adhesives for fixing PVC tiles to cement
1464 : 1992 Specification for clay ridge and ceiling tiles (second revision)
1478 : 1992 Specification for clay flooring tiles (second revision)
2690 Specification for burnt clay flat terracing tiles
(Part 1): 1993 Machine made (second revision)
(Part 2): 1992 Hand made (second revision)
3367 : 1993 Specification for burnt clay tiles for use in lining irrigation and drainage works (second revision)
3951 Specification for hollow clay tiles for floor and roofs
(Part 1): 2009 Filler type (second revision)
(Part 2): 2009 Structural type (second revision)
8920 : 1978 Methods for sampling of burnt clay tiles
13317 : 1992 Specification for clay roofing county tiles, half round and flat tiles
CEMENT AND CONCRETE (INCLUDING STEEL REINFORCEMENT FOR CONCRETE)
a) Aggregates IS No.
383 : 2016 Specification for coarse and fine aggregates for concrete (third revision)
650 : 1991 Specification for standard sand for testing of cement (second revision)
1542 : 1992 Specification for sand for plaster (second revision)
2116 : 1980 Specification for sand for masonry mortars (first revision)
IS No.
Title
IS No.
Title
2386
Methods of test for aggregates for concrete
16415 : 2015
Specification for composite cement
(Part 1) : 1963
Particle size and shape
c) Supplementary Cementitious Materials (Mineral Admixtures including Pozzolanas)
(Part 2) : 1963
Estimation of deleterious materials and organic impurities
IS No.
Title
(Part 3) : 1963
Specific gravity, density, voids, absorption and bulking
1344 : 1981
Specification for calcined clay pozzolana (second revision)
(Part 4) : 1963
Mechanical properties
1727 : 1967
Methods of test for pozzolanic materials (first revision)
(Part 5) : 1963
Soundness
3812
Specification for pulverized fuel ash
(Part 6) : 1963
18Paints and Allied Products
a) Water Based Paints and Pigments
IS No. Title
427 : 2013 Specification for distemper, dry, colour as required (third revision)
428 : 2013 Specification for washable distemper (third revision)
5410 : 2013 Specification for cement paint (second revision)
15489 : 2013 Specification for paint, plastic emulsion (first revision)
b) Ready Mixed Paints, Enamels and Powder Coatings
IS No.
Title
101 Methods of sampling and test for paints, varnishes and related products
(Part 1/Sec 1): Test on liquid paints (general and 1986 (general and physical), Section 1 Sampling (third revision)
(Part 1/Sec 2): Test on liquid paints (general and physical), Section 2 Preliminary examination and preparation of samples for testing (third revision)
(Part 1/Sec 3): Test on liquid paints (general and physical), Section 3 Preparation of panels (third revision)
(Part 1/Sec 4): Test on liquid paints (general and physical), Section 4 Brushing test (third revision)
IS No.
Title
IS No. Title
(Part 1/Sec 5): Test on liquid paints (general and physical), Section 5 Consistency (third revision)
(Part 1/Sec 6): Test on liquid paints (general and physical), Section 6 Flash point (third revision)
(Part 1/Sec 7): Test on liquid paints (general and physical), Section 7 Mass per 10 litres (third revision)
(Part 2/Sec 1): Test on liquid paints (Chemical examination), Section 1 Water content (third revision)
1988
(Part 2/Sec 2): Test on liquid paints (Chemical examination), Section 2 Volatile matter (third revision)
1986
(Part 3/Sec 1): Tests on paint film formation, Section 1986 1 Drying time (third revision)
(Part 3/Sec 2): Tests on paint film formation, Section 1989 2 Film thickness (third revision)
(Part 3/Sec 4): Tests on paint film formation, Section 1987 4 Finish (third revision)
(Part 3/Sec 5): Tests on paint film formation, Section 1987 5 Fineness of grind (third revision)
(Part 5/Sec 1): Mechanical test on paint films, Section 1 Hardness tests (third revision)
1Scope
This Code (Part 5) covers the requirements of building materials and components, and criteria for accepting new or alternative building materials and components.
2Materials
Every material used in fulfillment of the requirements of this Part, unless otherwise specified in the Code or approved, shall conform to the relevant Indian Standards. A list of Indian Standard specifications as the ‘accepted standards’ is given at the end of this Part of the Code. At the time of publication of the Code, the editions indicated were valid. All standards are subject to amendments and revisions. The Authority shall take cognizance of such amendments and revisions. The latest version of the specification shall, as far as possible, be adopted at the time of enforcement of this Part of the Code.
a) Blocks
IS No.
3952 : 2013
Title
Specification for burnt clay hollow bricks and blocks for walls and partitions (third revision)
b) Stabilized Soil Products
IS No. Title
1725 : 2013 Specification for stabilized soil blocks used in general building construction (second revision)
1077 : 1992 Specification for common burnt clay building bricks (fifth revision)
2180 : 1988 Specification for heavy duty burnt clay building bricks (third revision)
2222 : 1991 Specification for burnt clay perforated building bricks (third revision)
3495 (Parts 1 to 4): 1992 Methods of test of burnt clay building bricks (third revision)
Determination of compressive strength
Determination of water absorption
Determination of efflorescence
Determination of warpage
15648 : 2006 Specification for pulverized fuel ash for lime-pozzolana mixture applications
CLAY AND STABILIZED SOIL PRODUCTS
Measuring mortar making properties of fine aggregates
(Part 1) : 2013
For use as pozzolana in cement, cement mortar and concrete (third revision)
(Part 7) : 1963
Alkali aggregate reactivity
(Part 2) : 2013
For use as admixture in cement mortar and concrete (third revision)
(Part 8) : 1963
Petrographic examination
2430 : 1986
Methods of sampling of aggregates of concrete (first revision)
6491 : 1972
Method of sampling of flyash
6579 : 1981
Specification for coarse aggregate for water bound macadam (first revision)
12089 : 1987
Specification for granulated slag for manufacture of Portland slag cement
9142 : 1979
Specification for artificial light-weight aggregates for concrete masonry units
12870 : 1989
Methods of sampling calcined clay pozzolana
b) Cement
15388 : 2003
Specification for silica fume
16354 : 2015
Specification for metakaolin for use in cement, cement mortar and concrete
IS No.
Title
d) Chemical Admixtures
269 : 2015
Specification for ordinary Portland cement (sixth revision)
IS No.
Title
455 : 2015
Specification for Portland slag cement (fifth revision)
6925 : 1973
Methods of test for determination of water soluble chlorides in concrete admixtures
1489
Specification for Portland pozzolana cement
9103 : 1999
Specification for admixtures for concrete (first revision)
(Part 1) : 2015
Flyash based (fourth revision)
(Part 2) : 2015
Calcined clay based (fourth revision)
e) Concrete
3466 : 1988
Specification for masonry cement (second revision)
IS No.
Title
6452 : 1989
Specification for high alumina cement for structural use (first revision)
456 : 2000
Code of Practice for plain and reinforced concrete (fourth revision)
6909 : 1990
Specification for supersulphated cement (first revision)
1343 : 2012
Code of Practice for prestressed concrete (second revision)
8041 : 1990
Specification for rapid hardening Portland cement (second revision)
4926 : 2003
Code of Practice for ready-mixed concrete (second revision)
8042 : 2015
Specification for white Portland cement (third revision)
f) Cement and Concrete Sampling and Methods of Test
8043 : 1991
Specification for hydrophobic Portland cement (second revision)
IS No.
Title
12330 : 1988
Specification for sulphate resisting Portland cement
516 : 1959
Methods of test for strength of concrete
12600 : 1989
Specification for low heat Portland cement
1199 : 1959
Methods of sampling and analysis of concrete
2770 (Part 1) : 1967
Methods of testing bond in reinforced concrete: Pullout test
IS No.
Title
IS No.
Title
3085 : 1965
Methods of test for permeability of cement mortar and concrete
9013 : 1978
Method of making, curing and determining compressive strength of accelerated cured concrete test specimens
3535 : 1986
Methods of sampling hydraulic cement (first revision)
4031
Methods of physical tests for hydraulic cement
9284 : 1979
Method of test for abrasion resistance of concrete
(Part 1) : 1996
Determination of fineness by dry sieving (second revision)
12423 : 1988
Methods for colorimetric analysis of hydraulic cement
(Part 2) : 1999
Determination of fineness by specific surface by Blaine air permeability method (second revision)
12803 : 1989
Methods of analysis of hydraulic cement by X-ray fluorescence spectrometer
(Part 3) : 1988
Determination of soundness (first revision)
12813 : 1989
Method of analysis of hydraulic cement by atomic absorption spectrophotometer
(Part 4) : 1988
Determination of consistency of standard cement paste (first revision)
13311
Methods of non-destructive testing of concrete
(Part 5) : 1988
Determination of initial and final setting times (first revision)
(Part 1) : 1992
Ultrasonic pulse velocity
(Part 2) : 1992
Rebound hammer
(Part 6) : 1988
Determination of compressive strength of hydraulic cement (other than masonry cement)(first revision)
14959
Method of test for determination of water soluble and acid soluble chlorides in mortar and concrete
(Part 7) : 1988
Determination of compressive strength of masonry cement (first revision)
(Part 1) : 2001
Fresh mortar
(Part 2) : 2001
Hardened mortar and concrete
(Part 8) : 1988
Determination of transverse and compressive strength of plastic mortar using prism (first revision)
g) Treatment of Concrete Joints
IS No.
Title
(Part 9) : 1988
Determination of heat of hydration (first revision)
1834 : 1984
Specification for hot applied sealing compound for joint in concrete (first revision)
(Part 10) : 1988
Determination of drying shrinkage (first revision)
1838
Specification for preformed fillers for expansion joint in concrete pavements and structures (non extruding and resilient type)
(Part 11) : 1988
Determination of density (first revision)
(Part 12) : 1988
Determination of air content of hydraulic cement mortar (first revision)
(Part 1) : 1983
Bitumen impregnated fibre (first revision)
(Part 2) : 1984
CNSL aldehyde resin and coconut pith
(Part 13) : 1988
Measurement of water retentivity of masonry cement (first revision)
(Part 3) : 2011
Polymer based
(Part 14) : 1989
Determination of false set
10566 : 1983
Methods of test for preformed fillers for expansion joints in concrete paving and structural construction
(Part 15) : 1991
Determination of fineness by wet sieving
11433
Specification for one grade polysulphide based joint sealant
4032 : 1985
Methods of chemical analysis for hydraulic cement (first revision)
(Part 1) : 1985
General requirements
5816 : 1999
Method of test for splitting tensile strength of concrete (first revision)
(Part 2) : 1986
Methods of test
8142 : 1976
Methods of test for determining setting time of concrete by penetration resistance
12118
Specification for two parts polysulphide based sealants
(Part 1) : 1987
General requirements
(Part 2) : 1987
Methods of test
h) Steel Reinforcement and Prestressing Steel for Concrete
IS No.
Title
432 Specification for mild steel and medium tensile steel bars and hard drawn steel wire for concrete reinforcement
(Part 1): 1982 Mild steel and medium tensile steel bars (third revision)
(Part 2): 1982 Hard drawn steel wire (third revision)
1566 : 1982 Specification for hard drawn steel wire fabric for concrete reinforcement (second revision)
1608 : 2005 Metallic materials — Tensile testing at ambient temperature (third revision)
1785 Specification for plain hard drawn steel wire for pre-stressed concrete
1786 : 2008 Specification for high strength deformed steel bars and wires for concrete reinforcement (fourth revision)
2090 : 1983 Specification for high tensile steel bars used in prestressed concrete (first revision)
6003 : 2010 Specification for indented wire for prestressed concrete (second revision)
6006 : 2014 Specification for uncoated stress-relieved strand for prestressed concrete (second revision)
10790 Methods of sampling of steel for prestressed and reinforced concrete
13000 : 1990 Specification for silica-asbestos-
cement flat sheets
13008 : 1990 Specification for shallow corrugated asbestos cement sheets
iii) Other Fibre Cement Products
IS No. Title
14862 : 2000 Specification for fibre cement flat sheets
14871 : 2000 Specification for products in fibre reinforced cement long corrugated or asymmetrical section sheets and fittings for roofing and cladding
iv) Concrete Pipes and Pipes Lined/Coated with Concrete or Mortar IS No. Title
458 : 2003 Specification for precast concrete pipes (with and without reinforcement) (fourth revision)
694 : 2010 Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 V (fourth revision)
1554 Specification for PVC insulated (heavy duty) electric cables
(Part 1): 1988 For working voltages up to and including 1 100 volts (third revision)
(Part 2): 1988 For working voltages from 3.3 kV up to and including 11 kV (second revision)
(Part 1): 1988 For working voltage up to and including 1 100 V (first revision)
(Part 2) : 2011 For working voltages form 3.3 kV up to and including 33 kV (second revision)
(Part 3): 1993 For working voltages from 66 kV upto and including 220 kV
8130 : 2013 Specification for conductors for insulated electric cables and flexible cords (second revision)
9968 Specification for elastomer-insulated cables
(Part 1): 1988 For working voltages up to and including 1 100 V (first revision)
IS No. Title
(Part 2): 2002 For working voltages from 3.3 kV up to and including 33 kV (first revision)
10810 Methods of test for cables
(Part 0): 1984 General
(Part 1): 1984 Annealing test for wires used in conductors
(Part 2): 1984 Tensile test for aluminium wires
(Part 3): 1984 Wrapping test for aluminium wires
(Part 4): 1984 Persulphate test of conductor
(Part 5): 1984 Conductor resistance test
(Part 6): 1984 Thickness of thermoplastic and elastomeric insulation and sheath
(Part 7): 1984 Tensile strength and elongation at break of thermoplastic and elastomeric insulation and sheath
(Part 8): 1984 Breaking strength and elongation at break for impregnated paper insulation
(Part 9): 1984 Tear resistance for paper insulation
(Part 10): 1984 Loss of mass test
(Part 11): 1984 Thermal ageing in air
(Part 12): 1984 Shrinkage test
(Part 13): 1984 Ozone resistance test
(Part 14): 1984 Heat shock test
(Part 15): 1984 Hot deformation test
(Part 16): 1986 Accelerated ageing test by oxygen pressure method
(Part 17): 1986 Tear resistance test for heavy duty sheath
(Part 19): 1984 Bleeding and blooming test
(Part 20): 1984 Cold bend test
(Part 21): 1984 Cold impact test
(Part 22): 1984 Vicat softening point
(Part 23): 1984 Melt-flow index
(Part 24): 1984 Water soluble impurities test of insulating paper
(Part 25): 1984 Conductivity of water extract test of insulating paper
(Part 26): 1984 pH value of water extract test of insulating paper
(Part 27): 1984 Ash content test of insulating paper
(Part 28): 1984 Water absorption test (Electrical)
(Part 29): 1984 Environmental stress cracking test
(Part 30): 1984 Hot set test
IS No. Title
(Part 31): 1984 Oil resistance test
(Part 32): 1984 Carbon content test for polyethylene
(Part 33): 1984 Water absorption test (Gravimetric)
(Part 34): 1984 Measurement of thickness of metallic sheath
(Part 35): 1984 Determination of tin in lead alloy for sheathing
(Part 36): 1984 Dimensions of armouring material
(Part 37): 1984 Tensile strength and elongation at break of armouring materials
(Part 38) : 1984 Torsion test on galvanized steel wires for armouring
(Part 39): 1984 Winding test on galvanized steel strips for armouring
(Part 40): 1984 Uniformity of zinc coating on steel armour
(Part 41): 1984 Mass of zinc coating on steel armour
(Part 42): 1984 Resistivity test of armour wires and strips and conductance test of armour (wires/strips)
(Part 43): 1984 Insulation resistance
(Part 44): 1984 Spark test
(Part 45): 1984 High voltage test
(Part 46): 1984 Partial discharge test
(Part 47): 1984 Impulse test
(Part 48): 1984 Dielectric power factor test
(Part 49): 1984 Heating cycle test
(Part 50): 1984 Bending test
(Part 51): 1984 Dripping test
(Part 52): 1984 Drainage test
(Part 53): 1984 Flammability test
(Part 54): 1984 Static flexibility test
(Part 55): 1986 Abrasion test
(Part 56): 1987 Accelerated ageing by the air-pressure method
(Part 57): 1987 Flexing test
(Part 58): 1998 Oxygen index test
(Part 59): 1988 Determination of the amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
(Part 60): 1988 Thermal stability of PVC insulation and sheath
(Part 61): 1988 Flame retardant test
(Part 62): 1993 Fire resistance test for bunched cables
(Part 63): 1993 Smoke density of electric cables under fire conditions
IS No. Title
(Part 64) : 2003 Measurement of temperature index
12943 : 1990 Brass glands for PVC cables
DOORS, WINDOWS AND VENTILATORS
a) Wooden Doors, Windows and Ventilators
IS No.
Title
1003 Specification for timber panelled and glazed shutters
(Part 1): 2003 Door shutters (fourth revision)
(Part 2): 1994 Window and ventilator shutters (third revision)
2191 Specification for wooden flush door shutters (cellular and hollow core type)
(Part 1): 1983 Plywood face panels (fourth revision)
(Part 2): 1983 Particle board face panels and hardboard face panels (third revision)
2202 Specification for wooden flush door shutters (solid core type)
(Part 1): 1999 Plywood face panels (sixth revision)
(Part 2): 1983 Particle board face panels and hardboard face panels (third revision)
4020 Method of tests for door shutters
(Part 1): 1998 General (third revision)
(Part 2): 1998 Measurement of dimensions and squareness (third revision)
(Part 3): 1998 Measurement of general flatness (third revision)
(Part 4): 1998 Local planeness test (third revision)
(Part 5): 1998 Impact indentation test (third revision)
(Part 6): 1998 Flexure test (third revision)
(Part 7): 1998 Edge loading test (third revision)
(Part 8): 1998 Shock resistance test (third revision)
(Part 9): 1998 Buckling resistance test (third revision)
(Part 10): 1998 Slamming test (third revision)
(Part 11): 1998 Misuse test (third revision)
(Part 12): 1998 Varying humidity test (third revision)
(Part 13): 1998 End immersion test (third revision)
(Part 14): 1998 Knife test (third revision)
(Part 15): 1998 Glue adhesion test (third revision)
(Part 16): 1998 Screw withdrawal resistance test (third revision)
4021:1995 Specification for timber door, window and ventilator frames
IS No.
Title
6198 : 1992 Specification for ledged, braced and battened timber shutters (second revision)
b) Metal Doors, Windows and Ventilators
IS No. Title
1038 : 1983 Specification for steel doors, windows and ventilators (third revision)
1361 : 1978 Specification for steel windows for industrial buildings (first revision)
1948 : 1961 Specification for aluminium doors, windows and ventilators
1949 : 1961 Specification for aluminium windows for industrial buildings
4351 : 2003 Specification for steel door frames (second revision)
6248 : 1979 Specification for metal rolling shutters and rolling grills (first revision)
7452 : 1990 Specification for hot rolled steel sections for doors, windows and ventilators (second revision)
14856 : 2000 Specification for glass fibre reinforced (GRP) panel type door shutters for internal use
15380 : 2003 Specification for moulded raised high density fibre (HDF) panel doors
15931 : 2012 Specification for solid panel foam UPVC door shutters
d) Concrete Door and Window Frames
IS No. Title
6523 : 1983 Specification for precast reinforced concrete door and window frames (first revision)
e) Other Composite Material Doors and Windows
IS No.
Title
16073 : 2013 Specification for bamboo-jute composite panel door shutter
16074 : 2014 Specification for steel flush door shutters
16096 : 2013 Specification for phenol bonded bamboo-jute composite hollow door shutter
f) Fire Check Doors
IS No. Title
3614 Specification for fire-check doors
(Part 1): 1966 Plate, metal covered and rolling type
(Part 2) : 1992 Metallic and non-metallic fire check doors — Resistance test and performance criteria
g) Mesh/Net for Mosquito/Vector Prevention
IS No. Title
1568 : 1970 Specification for wire cloth for general purposes (first revision)
3150 : 1982 Specification for hexagonal wire netting for general purposes (second revision)
11199 : 1985 Specification for HDPE monofilament twine door nets
ELECTRICAL WIRING, FITTINGS AND ACCESSORIES
IS No.
Title
371 : 1999 Specification for ceiling roses (third revision)
374 : 1979 Specification for electric ceiling type fans and regulators (third revision)
418 : 2004 Specification for tungsten filament lamp for domestic and similar general lighting purposes (fourth revision)
1258 : 2005 Specification for bayonet lamp holders (fourth revision)
1293 : 2005 Specification for plugs and socket-outlets of rated voltage up to and including 250 volts and rated current up to and including 16 amperes (third revision)
1554 PVC insulated (heavy duty) electric cables
(Part 1): 1988 For working voltages upto and including 1 100 V (third revision)
(Part 2): 1988 For working voltages from 3.3 kV upto and including 11 kV (second revision)
2086 : 1993 Specification for carriers and bases used in re-wirable type electric fuses up to 650 volts (third revision)
2206 (Part 1) : Specification for flameproof electric lighting fittings: Well glass and bulkhead types (first revision)
1984
IS No.
Title
IS No.
Title
2215 : 2006
Specification for starters for fluorescent lamps (third revision)
(Part 1) : 1980
General requirements
2215 : 2006
Specification for starters for fluorescent lamps (third revision)
(Part 2) : 1981
Rigid steel conduits
2412 : 1975
Specification for link clips for electrical wiring (first revision)
(Part 3) : 1983
Rigid plain conduits for insulating materials
2418
Specification for tubular fluorescent lamps for general lighting services
(Part 4) : 1983
Pliable self-recovering conduits for insulating materials
(Part 1) : 1977
Requirements and tests (first revision)
(Part 5) : 2000
Pliable conduits of insulating materials
(Part 2) : 1977
Standard lamp data sheets (first revision)
(Part 6) : 2000
Pliable conduits of metal or composite materials
(Part 3) : 1977
Dimensions of G-5 and G-13 bi-pin caps (first revision)
(Part 8) : 2003
Rigid non threadable conduits of aluminium alloy
(Part 4) : 1977
Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision)
9926 : 1981
Specification for fuse wires used in rewirable type electric fuses up to 650 volts
2675 : 1983
Specification for enclosed distribution fuseboards and cutouts for voltages not exceeding 1 000 V (second revision)
10322
Specification for luminaires
2675 : 1983
Specification for enclosed distribution fuseboards and cutouts for voltages not exceeding 1 000 V (second revision)
(Part 1) : 2014
General requirements and tests (first revision)
3323 : 1980
Specification for bi-pin lamp holders for tubular fluorescent lamps (first revision)
(Part 2) : 1982
Constructional requirements
3323 : 1980
Specification for bi-pin lamp holders for tubular fluorescent lamps (first revision)
(Part 3) : 1984
Screw and screwless terminations
3324 : 1982
Specification for holders for starters for tubular fluorescent lamps (first revision)
(Part 4) : 1984
Methods of tests
3324 : 1982
Specification for holders for starters for tubular fluorescent lamps (first revision)
(Part 5/Sec 1) : 2012
Particular requirements, Section 1 General purpose luminaires (first revision)
3419 : 1988
Specification for fittings for rigid non-metallic conduits (second revision)
Specification for adaptors for flexible steel conduits
11037 : 1984
Electronic type fan regulators
4649 : 1968
Specification for adaptors for flexible steel conduits
12449
Starting devices (other than glow starters)
5077 : 1969
Specification for decorative lighting outfits
(Part 1) : 1988
General and safety requirements
8030 : 1976
Specification for luminaires for hospitals
(Part 2) : 1988
Performance requirements
9537
Specification for conduits for electrical installations
12776 : 2002
Specification for galvanized strand for earthing (first revision)
IS No.
Title
IS No.
Title
13010 : 2002
AC watt-hour meters, Class 0.5, 1 and 2 (first revision)
16102
Self ballasted LED-lamps for general lighting services
13779 : 1999
AC static watthour meters (Class 1 and 2) (first revision)
(Part 1) : 2012
Safety requirements
13779 : 1999
AC static watthour meters (Class 1 and 2) (first revision)
(Part 2) : 2012
Performance requirements
13947 (Part 5/Sec 2) : 2004
Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches
16103
LED modules for general lighting
13947 (Part 5/Sec 2) : 2004
Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches
(Part 1) : 2012
Safety specification
13947 (Part 5/Sec 2) : 2004
Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches
(Part 2) : 2012
Performance requirements
13947 (Part 5/Sec 2) : 2004
Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches
16148 : 2014
Performance specification for metal halide lamps
14763 : 2000
Conduit for electrical purposes, outside diameters of conduits for electrical installations and threads for conduits and fittings
16246: 2015
Specification for elastomer insulated cables with limited circuit integrity when affected by fire
14768
Conduit fittings for electrical installations
IS/IEC 60079-1: 2007
Explosive atmospheres — Part 1 : Equipment protection by flameproof enclosures “d”
(Part 1) : 2000
General requirements
IS/IEC 60898-1: 2002
Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for ac operation
(Part 2) : 2003
Metal conduit fittings
IS/IEC 60898-1: 2002
Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for ac operation
14772 : 2000
Enclosures for accessories for household and similar fixed electrical installations
IS/IEC 60898-1: 2002
Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for ac operation
14927
Cable trunking and ducting systems for electrical installations
IS/IEC 60947-1: 2007
Low voltage switchgear and controlgear — Part 1: General rules (first revision)
(Part 1) : 2001
General requirements
IS/IEC 60947-2: 2003
Low voltage switchgear and controlgear — Part 2: Circuit breakers
(Part 2) : 2001
Cable trunking and ducting systems intended for mounting on walls or ceilings
IS/IEC 60947-2: 2003
Low voltage switchgear and controlgear — Part 2: Circuit breakers
14930
Conduit systems for electrical installations
IS/IEC 60947-3: 1999
Low voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units
(Part 1) : 2001
General requirements
IS/IEC 60947-3: 1999
Low voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units
(Part 2) : 2001
Particular requirements for conduit system buried underground
IS/IEC 60794-1-1: 2001
Optical fibre cables — Part 1: Generic specification, Section 1 General
15111
Self ballasted lamps for general lighting services:
IS/IEC 60794-1-2 : 2003
Optical fibre cables — Part 1: Generic specification, Section 2 Basic optical cable test procedures
(Part 1) : 2002
Safety requirements
IS/IEC 60794-1-2 : 2003
Optical fibre cables — Part 1: Generic specification, Section 2 Basic optical cable test procedures
(Part 2) : 2002
Performance requirements
IS/IEC 60794-2: 2002
Optical fibre cables — Part 2 Sectional specification for indoor cables
15368 : 2003
Cable reels for household and similar purposes
IS/IEC 60794-2: 2002
Optical fibre cables — Part 2 Sectional specification for indoor cables
15518 (Part 1) : 2004
Safety requirements for incandescent lamps: Part 1 Tungsten filament
13. FILLERS, STOPPERS AND PUTTIES
13. FILLERS, STOPPERS AND PUTTIES
15518 (Part 1) : 2004
Safety requirements for incandescent lamps: Part 1 Tungsten filament
IS No.
Title
15518 (Part 1) : 2004
lamps for domestic and similar general lighting purposes
110 : 1983
Specification for ready mixed paint, brushing, grey filler, for enamels, for use over primers (second revision)
15787 : 2008
Switch-socket-outlets (non-interlock type)
419 : 1967
Specification for putty for use on window frames (first revision)
15968 : 2013
Ballasts for tubular fluorescent lamps — Performance requirements
423 : 1961
Specification for plastic wood, for joiner's filler (revised)
15974 : 2013
Auxiliaries for lamps — Starting devices (other than glow starters) — Performance requirements
3709 : 1966
Specification for mastic cement for bedding of metal windows
IS No.
Title
7164 : 1973 Specification for stopper
13184 : 1991 Specification for mastic filler, epoxy based (two pack)
4860 : 1968 Specification for acid resistant bricks
14862 : 2000 Specification for fibre cement flat sheets
14143 : 1994 Specification for prefabricated brick panel and partially precast concrete joist for flooring and roofing
14871 : 2000 Specification for products in fibre reinforced cement — Long corrugated or asymmetrical section sheets and fittings for roofing and cladding
n) Wall Coverings/Finishing
IS No. Title
1542 : 1992 Specification for sand for plaster (second revision)
3952 : 2013 Specification for burnt clay hollow bricks and blocks for walls and partitions (third revision)
4456 Methods of test for chemical resistant mortars
(Part 1): 1967 Silicate type and resin type
(Part 2): 1967 Sulphur type
4832 Specification for chemical resistant mortars
(Part 1): 1969 Silicate type
(Part 2): 1969 Resin type
(Part 3): 1968 Sulphur type
15418 : 2003 Specification for finished wall papers, wall vinyls and plastic wall coverings in roll form
GLASS
IS No. Title
2553 (Part 1): Specification for safety glass: Part 1
1990 General purpose (third revision)
Specification for ready mixed paint, finishing, interior for general purposes, to Indian Standard colours No. 101, 216, 217, 219, 275, 281, 352, 353, 358 to 361, 363, 364, 388,
2508 : 1984 Specification for low density polyethylene films (second revision)
6307 : 1985 Specification for rigid PVC sheets (first revision)
10889 : 2004 Specification for high density polyethylene films (first revision)
12830 : 1989 Specification for rubber based adhesives for fixing PVC tiles to cement
13162 Methods of test for geotextiles
(Part 2): 1991 Determination of resistance to exposure of ultra-violet light and water (Xenon arc type apparatus)
(Part 3): 1992 Determination of thickness at specified pressure
(Part 4): 1992 Determination of puncture resistance by falling cone method
(Part 5): 1992 Determination of tensile properties using a wide width strip
13262 : 1992 Specification for pressure sensitive adhesive tapes with plastic base
13325 : 1992 Method of test for the determination to tensile properties of extruded polymer geogrids using the wide strip
13326 (Part 1): Method of test for the evaluation of interface friction between geosynthetics and soil: Part 1 Modified direct shear technique
1992
14182 : 1994 Specification for solvent cement for use with unplasticized polyvinyl-chloride plastic pipe and fittings
14293 : 1995 Method of test for trapezoid tearing – Geotextiles
14294 : 1995 Method of determination of apparent opening size by dry sieving technique – Geotextiles
14324 : 1995 Method of test for determination of water permeability-permittivity — Geotextiles
14443 : 1997 Specification for polycarbonate sheets
14500 : 1998 Specification for linear low-density polyethylene (LLDPE) films
14643 : 1999 Specification for unsintered polytetrafluoroethylene (PTFE) tape for thread sealing applications
14706 : 1999 Sampling and preparation of test specimen of geotextiles
14714 : 1999 Determination of abrasion resistance of geotextiles
14715 : 2000 Specification for woven jute geotextiles
14716 : 1999 Determination of mass per unit area of geotextiles
14739 : 1999 Methods for determination of creep of geotextiles
14753 : 1999 Specification for poly(methyl) methacrylate (PMMA) (Acrylic) sheets
IS No. Title
14986 : 2001 Jute geo-grid for rain water erosion control in road and railway embankments and hill slopes
15060 : 2001 Tensile test for joints/seams by wide width method of geotextiles
15351 : 2015 Specification for textiles — Laminated high density polyethylene (HDPE) woven fabric (geomembrane) for waterproof lining (second revision)
SANITARY APPLIANCES AND WATER FITTINGS
782 : 1978 Specification for caulking lead (third revision)
5455 : 1969 Specification for cast-iron steps for manholes
5961 : 1970 Specification for cast iron gratings for drainage purposes
9140 : 1996 Method of sampling of vitreous and fire clay sanitary appliances (second revision)
9872 : 1981 Specification for precast concrete septic tanks
12592 : 2002 Specification for precast concrete manhole covers and frames (first revision)
12701 : 1996 Specification for rotational moulded polyethylene water storage tanks (first revision)
13356 : 1992 Specification for precast ferrocement water tanks (250 to 10 000 litres capacity)
14399 Hot press moulded thermosetting glass fibre reinforced (GRP) sectional water storage tanks
(Part 1): 1996 Specification for panels
(Part 2): 1996 Guidelines for assembly, installation and testing
b) Pipes and Fittings excluding valves
i) Brass and Copper Pipes and Fittings
IS No. Title
407 : 1981 Specification for brass tubes for general purposes (third revision)
2501 : 1995 Specification for solid drawn copper tubes for general engineering purposes (third revision)
ii) Cast Iron Pipes and Fittings
IS No. Title
1536 : 2001 Specification for centrifugally cast (spun) iron pressure pipes for water, gas and sewage (fourth revision)
1537 : 1976 Specification for vertically cast iron pressure pipes for water, gas and sewage (first revision)
1538 : 1993 Specification for cast iron fittings for pressure pipes for water, gas and sewage (third revision)
1729 : 2002 Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series (second revision)
1879 : 2010 Specification for malleable cast iron pipe fittings (third revision)
3989: 2009 Specification for centrifugally cast (spun) iron spigot and socket soil, waste and ventilating pipes, fittings and accessories (third revision)
5531: 2014 Specification for cast iron specials for asbestos-cement pressure pipes for water, gas and sewage (third revision)
6418 : 1971 Specification for cast iron and malleable cast iron flanges for general engineering purposes
7181 : 1986 Specification for horizontally cast iron double flanged pipes for water, gas and sewage (first revision)
8329 : 2000 Specification for centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage (third revision)
8794 : 1988 Specification for cast iron detachable joints for use with asbestos cement pressure pipes (first revision)
9523 : 2000 Specification for ductile iron fittings for pressure pipes for water, gas and sewage (first revision)
IS No. Title
10292 : 1988 Dimensional requirements for rubber sealing rings for C.I.D. Joints in asbestos cement piping (first revision)
10299 : 1982 Cast iron saddle pieces for service connection from asbestos cement pressure pipes
11606 : 1986 Methods of sampling cast iron pipes and fittings
12820 : 2004 Dimensional requirements of rubber gaskets for mechanical joints and push-on joints for use with cast iron pipes and fittings for carrying water, gas and sewage (first revision)
12987 : 1991 Cast iron detachable joints for use with asbestos cement pressure pipes (light duty)
12988 : 1991 Rubber sealing rings for CID joints for light duty AC pipes — Dimensional requirements
13382 : 2004 Specification for cast iron specials for mechanical and push-on flexible joints for pressure pipelines for water, gas and sewage (first revision)
15905 : 2011 Specification for hubless centrifugally cast (spun) iron pipes, fittings and accessories — Spigot series
iii) Lead Pipes and Fittings
IS No.
Title
404 (Part 1): Specification for lead pipes: Part 1
1993 For other than chemical purpose (third revision)
iv) Fibre Pipes and Fittings
IS No.
Title
11925 : 1986 Specification for pitch-impregnated fibre pipes and fittings for drainage purposes
v) Plastic Pipes and Fittings
IS No. Title
4984 : 1995 Specification for high density polyethylene pipes for water supply (fourth revision)
4985 : 2000 Specification for unplasticized PVC pipes for potable water supplies (third revision)
7834 Specification for injection moulded PVC socket fittings with solvent cement joints for water supplies
IS No. Title
(Part 1): 1987 General requirements (first revision)
(Part 2) : 1987 Specific requirements for 45° elbows (first revision)
(Part 3) : 1987 Specific requirements for 90° elbows (first revision)
(Part 4): 1987 Specific requirements for 90° tees (first revision)
(Part 5): 1987 Specific requirements for 45° tees (first revision)
(Part 6): 1987 Specific requirements for sockets (first revision)
(Part 7): 1987 Specific requirements for unions (first revision)
(Part 8): 1987 Specific requirements for caps (first revision)
8008 Specification for injection moulded high density polyethylene (HDPE) fittings for potable water supplies
(Part 1): 2003 General requirements
(Part 2) : 2003 Specific requirements for 90° bends (first revision)
(Part 3): 2003 Specific requirements for 90° tees
(Part 4): 2003 Specific requirements for reducers
(Part 5): 2003 Specific requirements for ferrule reducers (first revision)
(Part 6): 2003 Specific requirements for pipe ends
(Part 7): 2003 Specific requirements for sandwich flanges
(Part 8): 2003 Specific requirements for reducing tests
(Part 9): 2003 Specific requirements for end caps (first revision)
8360 Specification for fabricated high density polyethelene (HDPE) fittings for potable water supplies
(Part 1): 1977 General requirements
(Part 2): 1977 Specific requirements for 90° tees
(Part 3): 1977 Specific requirements for 90° bends
10124 Specification for fabricated PVC-U fittings for potable water supplies
(Part 1): 2009 General requirements (second revision)
(Part 2): 2009 Specific requirements for sockets (second revision)
(Part 3): 2009 Specific requirements of straight reducers (second revision)
(Part 4): 2009 Specific requirements for caps (second revision)
(Part 5): 2009 Specific requirements for equal tees (second revision)
NATIONAL BUILDING CODE OF INDIA 2016
IS No.
Title
(Part 6) : 2009 Specific requirements for flanged tail piece with metallic flanges (second revision)
(Part 7): 2009 Specific requirements for threaded adaptors (second revision)
(Part 8): 2009 Specific requirements for 90° bends (second revision)
(Part 9): 2009 Specific requirements for 60° bends (second revision)
(Part 10): 2009 Specific requirements for 45° bends (second revision)
(Part 11): 2009 Specific requirements for 30° bends (second revision)
(Part 12): 2009 Specific requirements for 22(1)/(2)° bends (second revision)
(Part 13) : 2009 Specific requirements for 11(1)/(4)° bends (second revision)
12235 Methods of test for unplasticised PVC pipes for potable water supplies
(Part 1): 2004 Measurement of dimensions (first revision)
(Part 2): 2004 Determination of Vicat softening temperature (first revision)
(Part 3): 2004 Test for opacity (first revision)
(Part 4): 2004 Determining the detrimental effect on the composition of water (first revision)
(Part 6): 2004 Stress relief test (first revision)
(Part 7): 2004 Resistance to sulphuric acid (first revision)
(Part 8/Sec 1): Resistance to internal hydrostatic pressure, Section 1 Resistance to internal hydrostatic pressure at constant internal water pressure (first revision)
(Part 8/Sec 2): Resistance to internal hydrostatic pressure, Section 2 Leak-tightness of elastomeric sealing ring type socket joints under positive internal pressure and with angular deflection (first revision)
(Part 8/Sec 3): Resistance to internal hydrostatic pressure, Section 3 Leak-tightness of 2004
IS No. Title elastomeric sealing ring type socket joints under negative internal pressure and with angular deflection (first revision)
(Part 8/Sec 4): Resistance to internal hydrostatic pressure, Section 4 Leak-tightness of elastomeric sealing ring type socket joints under positive internal pressure without angular deflection (first revision)
(Part 9): Resistance to external blows (impact resistance) at 0°C (Round-the-clock method)
(Part 10): 2004 Determination of organotin as tin aqueous solution (first revision)
(Part 11): 2004 Resistance to dichloromethane at specified temperature (first revision)
(Part 12): 2004 Determination of titanium dioxide content
(Part 13): 2004 Determination of tensile strength and elongation
(Part 14): 2004 Determination of density/relative density (specific gravity)
(Part 15): 2004 Determination of vinyl chloride monomer content
(Part 16): 2004 High temperature test
(Part 17): 2004 Determination of ash content and sulphated ash content
(Part 18): 2004 Determination of ring stiffness
(Part 19): 2004 Flattening test
12709 : 1994 Specification for glass-fibre reinforced plastic (GRP) pipes joints and fittings for use for potable water supply (first revision)
12818 : 2010 Specification for unplasticized polyvinyl chloride(PVC-U) screen and casing pipes for bore/tubewells (second revision)
13592 : 2013 Specification for unplasticized polyvinyl chloride (PVC-U) pipes for soil and waste discharge system for inside and outside buildings including ventilation and rainwater system (first revision)
14333 : 1996 Specification for high density polyethylene pipes for sewerage
14402 : 1996 Specification for GRP pipes, joints and fittings for use for sewerage, industrial waste and water (other than potable)
IS No.
Title
IS No.
Title
14735 : 1999
Specification for unplasticized polyvinyl chloride (UPVC) injection moulded fittings for soil and waste discharge system for inside and outside buildings including ventilation and rain water system
5504 : 1997
Specification for spiral welded pipes (first revision)
6286 : 1979
Seamless and welded steel pipe for sub-zero temperature service
6392 : 1971
Steel pipe flanges
14885 : 2001
Specification for polyethylene pipe for supply of gaseous fuel
vii) Stoneware Pipes and Fittings
IS No.
Title
15328 : 2003
Specification for unplasticized non-pressure polyvinyl chloride (PVC-U) pipes for use in underground drainage and sewerage system
651 : 2007
Specification for glazed stoneware pipes and fittings (sixth revision)
3006 : 1979
Specification for chemically resistant glazed stoneware pipes and fittings (first revision)
15450 : 2004
Specification for polyethylene/ aluminium/polyethylene composite pressure pipes for hot and cold water supplies
viii) Asbestos Cement Pipes
[See 8 (a) (ii) under the category ‘Composite Matrix Products’]
15778 : 2007
Specification for chlorinated polyvinyl chloride (CPVC) pipes for potable hot and cold water distribution supplies
ix) Concrete Pipes and Pipes lined/coated with Concrete or Mortar
15801 : 2008
Specification for polypropylene-random copolymer pipes for hot and cold water supplies
[See 8 (a) (iv) under the category ‘Composite Matrix Products’]
15927
Specification for polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels
c) Kitchen and Sanitary Appliances
IS No.
Title
(Part 1) : 2012
Fittings for sockets using heated tools
771
Specification for glazed fire clay sanitary appliances
(Part 2) : 2012
Spigot fittings for butt fusion jointing or socket fusion using heated tools, spigot fittings for use with electro-fusion fittings
(Part 1) : 1979
General requirements (second revision)
IS No.
Title
d) Valves and Water Fittings (including Ferrules)
IS No.
Title
2548
Specification for plastic seats and covers for water-closets
778 : 1984
Specification for copper alloy gate, globe, and check valves for water works purposes (fourth revision)
(Part 1) : 1996
Thermoset seats and covers (fifth revision)
(Part 2) : 1996
Thermoplastic seats and covers (fifth revision)
781 : 1984
Specification for cast copper alloy screw-down bib taps and stop valves for water services (third revision)
2556
Specification for vitreous sanitary appliances (vitreous china)
1701 : 1960
Specification for mixing valves for ablutionary and domestic purposes
(Part 1) : 1994
General requirements (third revision)
1703 : 2000
Specification for water fittings — Copper alloy float valves (horizontal plunger type) (fourth revision)
(Part 2) : 2004
Specific requirements of wash-down water-closets (fifth revision)
(Part 3) : 2004
Specific requirements of squatting pans (fifth revision)
1711 : 1984
Specification for self-closing taps for water supply purposes (second revision)
(Part 4) : 2004
Specific requirements of wash basins (fourth revision)
1795 : 1982
Specification for pillar taps for water supply purposes (second revision)
(Part 5) : 1994
Specific requirements of laboratory sinks (third revision)
2692 : 1989
Specification for ferrules for water services (second revision)
(Part 6) : 1995
Specific requirements of urinals and partition plates (fourth revision)
3004 : 1979
Specification for plug cocks for water supply purposes (first revision)
(Part 7) : 1995
Specific requirements of accessories for sanitary appliances (third revision)
3042 : 1965
Specification for single faced sluice gates (200 to 1 200 mm size)
(Part 8) : 2004
Specific requirements of pedestal close coupled wash-down and syphonic water closets (fifth revision)
3950 : 1979
Specification for surface boxes for sluice valves (first revision)
(Part 9) : 2004
Specific requirements of pedestal type bidets (fifth revision)
4038 : 1986
Specification for foot valves for water works purposes (second revision)
IS No. Title
9763 : 2000 Specification for plastic bib taps, pillar taps, angle valves, hot and cold water services (second revision)
12234 : 1988 Specification for plastic equilibrium float valve for cold water services
13049 : 1991 Specification for diaphragm type (plastic body) float operated valves for cold water services
13114 : 1991 Specification for forged brass gate, globe and check valves for water works purposes
13349 : 1992 Specification for single faced cast iron thimble mounted sluice gates
14845 : 2000 Specification for resilient seated cast iron air relief valves for water works purposes
14846 : 2000 Specification for sluice valves for water works purposes (50-1 200 mm)
e) Water Meters
IS No.
Title
779 : 1994 Specification for water meters (domestic type) (sixth revision)
2373 : 1981 Specification for water meters (bulk type) (third revision)
6784 : 1996 Method for performance testing of water meters (domestic type) (second revision)
STEEL AND ITS ALLOYS (See 23 FOR STRUCTURAL SECTIONS)
1030 : 1998 Carbon steel castings for general engineering purposes (fifth revision)
1136 : 2008 Preferred sizes for wrought metal products (third revision)
1762 (Part 1): Code for designation of steels: Part 1
1974 Based on letter symbols (first revision)
2049 : 1978 Colour code for the identification of wrought steel for general engineering purposes (first revision)
2644 : 1994 High tensile steel castings (fourth revision)
2708 : 1993 Specification for 1.5 percent manganese steel castings for general engineering purposes (third revision)
7598 : 1990 Classification of steels (first revision)
10461 Resistance to inter-granular corrosion
(Part 1): 1994 Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (first revision)
(Part 2): 1994 Corrosion test in a sulphuric acid/copper sulphate medium in the presence of copper turnings (Monypenny Strauss Test) (first revision)
b) Structural Steel
IS No. Title
2062 : 2011 Specification for hot rolled medium and high tensile structural steel (seventh revision)
2830 : 2012 Specification for carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes (third revision)
2831 : 2012 Specification for carbon steel cast billets ingots, blooms and slabs for re-rolling into structural steel (Ordinary quality) (fourth revision)
8052 : 2006 Specification for steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications (second revision)
8952 : 1995 Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes (first revision)
11587 : 1986 Specification for structural weather resistant steels
15103 : 2002 Fire resistant steel
15911 : 2010 Structural steel (Ordinary quality)
15962 : 2012 Structural steels for buildings and structures with improved seismic resistance
c) Sheet and Strip IS No. Title
277 : 2003 Specification for galvanized steel sheets (plain and corrugated) (sixth revision)
412 : 1975 Specification for expanded metal steel sheets for general purposes (second revision)
513 : 2008 Specification for cold reduced low carbon steel sheets and strips (fifth revision)
1079 : 2009 Specification for hot rolled carbon steel sheet and strip (sixth revision)