This Code (Part 5) covers the requirements of building materials and components, and criteria for accepting new or alternative building materials and components.
BUREAU OF INDIAN STANDARDS
This Code (Part 5) lists Indian Standard specifications for materials used in building construction. The Indian Standards for methods of tests, to ensure the requirements demanded of the materials in the various situations, are also included. This is with a view to ensuring the quality and effectiveness of building materials used in the construction and of their storage, which are as important as other aspects of building activity like planning, designing and constructing the building itself.
Historically, choice of building materials was determined by what was locally available, appropriateness to geoclimatic conditions and affordability of users. In the recent past, different initiatives have been taken in the areas of research and development, standardization, and development and promotion of innovative materials. A review of the recent trends indicates that the growth in the area of building materials covers emerging trends and latest developments in the use of wastes, mineral admixtures in cement and concrete, substitutes to conventional timber, composite materials and recycling of wastes, at the same time ensuring desired response of materials in relation to fire safety, long term performance and durability. In addition to these, nowadays, development of specific materials is being researched which may be structured and designed to meet needs to specially developed construction technologies in time to come, such as, for disaster prone areas or aggressive climatic and industrial situations.
To encourage use of appropriate materials, it may be desirable to have to the largest extent possible, performance oriented approach for specifications rather than prescriptive approach. The approach has been already adopted in some cases in development of standards, wherever found possible.
Indian Standards cover the requirements for most of the materials in use. However, there may be a gap between development of new materials and techniques of application and formulation of standards. It, therefore, becomes necessary for a Building Code to be flexible to recognize building materials other than those for which Indian Standards are available. This Part of the Code, therefore, since its first version, duly takes care of this aspect and explicitly provides for use of new or alternate building materials, provided it is proved by authentic tests that the new or alternative material is effective and suitable for the purpose intended. However, it is worthwhile that more and more emphasis is given to the satisfaction of performance requirements expected of a building material, so that a wide range of such new or alternate materials can be evaluated and used, if found appropriate.
As already emphasized, quality of material is quite important for their appropriate usage, whether it is a material for which an Indian Standard is available or a new or alternative material as defined in 4 of this Part of the Code. While continuing to emphasize on conformity of building materials to available Indian Standards, this Part recommends that the building regulating authority may also recognize the use of building materials conforming to other specifications and test methods (see 4.2), in case Indian Standards are not available for particular materials. Third party certification schemes available in the country for quality assurance of above materials can be used with advantage to ensure the appropriateness of these materials.
It is well recognized that buildings during their construction and subsequently in their operation consume lot of resources. The holistic approach for ensuring proper and sustainable developments is to take care of the concerned aspects affecting sustainability during the conceptualization, planning, design, construction, and operation and maintenance stages. The building material production, transportation and utilization assume a substantial component of the embodied energy that goes into a building. It is therefore important that sustainability of building materials is well understood and ensured in a building project. This Part of the Code recognizes this aspect and covers appropriate provision therefore.
This Part of the Code was first published in 1970 and subsequently revised in 1983 and 2005 as Part 5 of NBC 2005. The first and second revision of this Part incorporated an updated version of the list of Indian Standards given at the end of this Part of the Code. Also the list of building materials was completely revised to make it more user-friendly. This second revision of this Part, while basically retaining the structure of 2005 version of the Code, incorporates the following modifications:
a) The clause on new/alternative materials has been extended to give examples of some potential new/alternative materials;
b) Recognizing the importance of sustainability in building construction and built environment, a new clause giving broad aspects relating to sustainable materials, has been added;
c) The list at the end of this Part has been updated to reflect the latest available Indian Standard specifications and methods of test.
d) In the above list, existing categories have been re-organized and some new categories have been added either under the existing principal categories or as separate principal categories. In the process, the categories such as, bricks, blocks and other masonry units; mortar (including sand for mortar); supplementary cementitious materials; mesh/net for mosquito/vector prevention; concrete door and window frame; other composite material doors and windows; fire check doors; stone flooring, etc, have been added.
e) The headings of some of the categories have been rechristened to more appropriately reflect the materials/products actually covered thereunder.
A reference to SP 21 : 2005 ‘Summaries of Indian Standards for Building Materials’ may be useful. This publication gives the summaries of Indian Standards covering various building materials, fittings and components except standards relating to paints.
All standards cross-referred in the main text of this Part, are subject to revision. The parties to agreement based on this Part are encouraged to investigate the possibility of applying the most recent editions of the standards.
For the purpose of deciding whether a particular requirement of this Part is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of significant places retained in the rounded off value should be the same as that of the specified value in this Part.
654 : 1992 Specification for clay roofing tiles, Mangalore pattern (third revision)
1464 : 1992 Specification for clay ridge and ceiling tiles (second revision)
1478 : 1992 Specification for clay flooring tiles (second revision)
2690 Specification for burnt clay flat terracing tiles
(Part 1): 1993 Machine made (second revision)
(Part 2): 1992 Hand made (second revision)
3367 : 1993 Specification for burnt clay tiles for use in lining irrigation and drainage works (second revision) 3951 Specification for hollow clay tiles for floor and roofs
(Part 1): 2009 Filler type (second revision)
(Part 2): 2009 Structural type (second revision)
8920 : 1978 Methods for sampling of burnt clay tiles
13317 : 1992 Specification for clay roofing county tiles, half round and flat tiles
a) Aggregates IS No.
383 : 2016 Specification for coarse and fine aggregates for concrete (third revision)
650 : 1991 Specification for standard sand for testing of cement (second revision)
1542 : 1992 Specification for sand for plaster (second revision)
2116 : 1980 Specification for sand for masonry mortars (first revision)
| IS No. | Title | IS No. | Title |
| 2386 | Methods of test for aggregates for concrete | 16415 : 2015 | Specification for composite cement |
| (Part 1) : 1963 | Particle size and shape | c) Supplementary Cementitious Materials (Mineral Admixtures including Pozzolanas) | |
| (Part 2) : 1963 | Estimation of deleterious materials and organic impurities | IS No. | Title |
| (Part 3) : 1963 | Specific gravity, density, voids, absorption and bulking | 1344 : 1981 | Specification for calcined clay pozzolana (second revision) |
| (Part 4) : 1963 | Mechanical properties | 1727 : 1967 | Methods of test for pozzolanic materials (first revision) |
| (Part 5) : 1963 | Soundness | 3812 | Specification for pulverized fuel ash |
| (Part 6) : 1963 | Measuring mortar making properties of fine aggregates | (Part 1) : 2013 | For use as pozzolana in cement, cement mortar and concrete (third revision) |
| (Part 7) : 1963 | Alkali aggregate reactivity | (Part 2) : 2013 | For use as admixture in cement mortar and concrete (third revision) |
| (Part 8) : 1963 | Petrographic examination | ||
| 2430 : 1986 | Methods of sampling of aggregates of concrete (first revision) | 6491 : 1972 | Method of sampling of flyash |
| 6579 : 1981 | Specification for coarse aggregate for water bound macadam (first revision) | 12089 : 1987 | Specification for granulated slag for manufacture of Portland slag cement |
| 9142 : 1979 | Specification for artificial light-weight aggregates for concrete masonry units | 12870 : 1989 | Methods of sampling calcined clay pozzolana |
| b) Cement | 15388 : 2003 | Specification for silica fume | |
| 16354 : 2015 | Specification for metakaolin for use in cement, cement mortar and concrete | ||
| IS No. | Title | d) Chemical Admixtures | |
| 269 : 2015 | Specification for ordinary Portland cement (sixth revision) | IS No. | Title |
| 455 : 2015 | Specification for Portland slag cement (fifth revision) | 6925 : 1973 | Methods of test for determination of water soluble chlorides in concrete admixtures |
| 1489 | Specification for Portland pozzolana cement | 9103 : 1999 | Specification for admixtures for concrete (first revision) |
| (Part 1) : 2015 | Flyash based (fourth revision) | ||
| (Part 2) : 2015 | Calcined clay based (fourth revision) | e) Concrete | |
| 3466 : 1988 | Specification for masonry cement (second revision) | IS No. | Title |
| 6452 : 1989 | Specification for high alumina cement for structural use (first revision) | 456 : 2000 | Code of Practice for plain and reinforced concrete (fourth revision) |
| 6909 : 1990 | Specification for supersulphated cement (first revision) | 1343 : 2012 | Code of Practice for prestressed concrete (second revision) |
| 8041 : 1990 | Specification for rapid hardening Portland cement (second revision) | 4926 : 2003 | Code of Practice for ready-mixed concrete (second revision) |
| 8042 : 2015 | Specification for white Portland cement (third revision) | f) Cement and Concrete Sampling and Methods of Test | |
| 8043 : 1991 | Specification for hydrophobic Portland cement (second revision) | IS No. | Title |
| 12330 : 1988 | Specification for sulphate resisting Portland cement | 516 : 1959 | Methods of test for strength of concrete |
| 12600 : 1989 | Specification for low heat Portland cement | 1199 : 1959 | Methods of sampling and analysis of concrete |
| 2770 (Part 1) : 1967 | Methods of testing bond in reinforced concrete: Pullout test | ||
| IS No. | Title | IS No. | Title |
| 3085 : 1965 | Methods of test for permeability of cement mortar and concrete | 9013 : 1978 | Method of making, curing and determining compressive strength of accelerated cured concrete test specimens |
| 3535 : 1986 | Methods of sampling hydraulic cement (first revision) | ||
| 4031 | Methods of physical tests for hydraulic cement | 9284 : 1979 | Method of test for abrasion resistance of concrete |
| (Part 1) : 1996 | Determination of fineness by dry sieving (second revision) | 12423 : 1988 | Methods for colorimetric analysis of hydraulic cement |
| (Part 2) : 1999 | Determination of fineness by specific surface by Blaine air permeability method (second revision) | 12803 : 1989 | Methods of analysis of hydraulic cement by X-ray fluorescence spectrometer |
| (Part 3) : 1988 | Determination of soundness (first revision) | 12813 : 1989 | Method of analysis of hydraulic cement by atomic absorption spectrophotometer |
| (Part 4) : 1988 | Determination of consistency of standard cement paste (first revision) | 13311 | Methods of non-destructive testing of concrete |
| (Part 5) : 1988 | Determination of initial and final setting times (first revision) | (Part 1) : 1992 | Ultrasonic pulse velocity |
| (Part 2) : 1992 | Rebound hammer | ||
| (Part 6) : 1988 | Determination of compressive strength of hydraulic cement (other than masonry cement)(first revision) | 14959 | Method of test for determination of water soluble and acid soluble chlorides in mortar and concrete |
| (Part 7) : 1988 | Determination of compressive strength of masonry cement (first revision) | (Part 1) : 2001 | Fresh mortar |
| (Part 2) : 2001 | Hardened mortar and concrete | ||
| (Part 8) : 1988 | Determination of transverse and compressive strength of plastic mortar using prism (first revision) | g) Treatment of Concrete Joints | |
| IS No. | Title | ||
| (Part 9) : 1988 | Determination of heat of hydration (first revision) | 1834 : 1984 | Specification for hot applied sealing compound for joint in concrete (first revision) |
| (Part 10) : 1988 | Determination of drying shrinkage (first revision) | ||
IS No. Title
432 Specification for mild steel and medium tensile steel bars and hard drawn steel wire for concrete reinforcement
(Part 1): 1982 Mild steel and medium tensile steel bars (third revision)
(Part 2): 1982 Hard drawn steel wire (third revision)
1566 : 1982 Specification for hard drawn steel wire fabric for concrete reinforcement (second revision)
1608 : 2005 Metallic materials — Tensile testing at ambient temperature (third revision) 1785 Specification for plain hard drawn steel wire for pre-stressed concrete
(Part 1): 1983 Cold drawn stress-relieved wire (second revision)
(Part 2): 1983 As drawn wire (first revision)
1786 : 2008 Specification for high strength deformed steel bars and wires for concrete reinforcement (fourth revision)
2090 : 1983 Specification for high tensile steel bars used in prestressed concrete (first revision)
6003 : 2010 Specification for indented wire for prestressed concrete (second revision)
6006 : 2014 Specification for uncoated stress-relieved strand for prestressed concrete (second revision) 10790 Methods of sampling of steel for prestressed and reinforced concrete
(Part 1): 1984 Prestressing steel
(Part 2): 1984 Reinforcing steel
13620 : 1993 Specification for fusion bonded epoxy coated reinforcing bars
14268 : 1995 Specification for uncoated stress relieved low relaxation seven ply strand for prestressed concrete
16172 : 2014 Specification for reinforcement couplers for mechanical splices of bars in concrete
a) Cement Matrix Products
i) Precast Concrete Products
IS No. Title
2174 : 1962 Specification for reinforced concrete dust bins
2185 Specification for concrete masonry units
(Part 1): 2005 Hollow and solid concrete blocks (third revision)
(Part 2): 1983 Hollow and solid lightweight concrete blocks (first revision)
(Part 3): 1984 Autoclaved cellular (aerated) concrete blocks (first revision)
(Part 4): 2008 Cellular concrete blocks using preformed foam
4996 : 1984 Specification for reinforced concrete fence posts (first revision)
5751 : 1984 Specification for precast concrete coping blocks (first revision)
5758 : 1984 Specification for precast concrete kerbs (first revision)
5820 : 1970 Specification for precast concrete cable covers
6072 : 1971 Specification for autoclaved reinforced cellular concrete wall slabs
6073 : 2006 Specification for autoclaved reinforced cellular concrete floor and roof slabs (first revision)
6441 Methods of test for autoclaved cellular concrete products
(Part 1): 1972 Determination of unit weight or bulk density and moisture content
(Part 2): 1972 Determination of drying shrinkage
(Part 4): 1972 Corrosion protection of steel reinforcement in autoclaved cellular concrete
(Part 5): 1972 Determination of compressive strength
(Part 6): 1973 Strength, deformation and cracking of flexural members subject to bending — Short duration loading test
(Part 7): 1973 Strength, deformation and cracking of flexural members subject to bending — Sustained loading test
(Part 8): 1973 Loading tests for flexural members in diagonal tension
(Part 9): 1973 Jointing of autoclaved cellular concrete elements
6523 : 1983 Specification for precast reinforced concrete door and window frames (first revision)
IS No. Title
9375 : 1979 Specification for precast reinforced concrete plant guards
9872 : 1981 Specification for precast concrete septic tanks
9893 : 1981 Specification for precast concrete blocks for lintels and sills
12440 : 1988 Specification for precast concrete stone masonry blocks
12592 : 2002 Specification for precast concrete manhole covers and frames (first revision)
13356 : 1992 Specification for precast ferrocement water tanks (250 to 10 000 litres capacity)
13990 : 1994 Specification for precast reinforced concrete planks and joists for flooring and roofing
14143 : 1994 Specification for prefabricated brick panel and partially precast concrete joist for flooring and roofing
14201 : 1994 Specification for precast reinforced concrete channel unit for construction of floors and roofs
14241 : 1995 Specification for precast L-Panel units for roofing
ii) Asbestos Fibre Cement Products IS No. Title
459 : 1992 Specification for corrugated and semi-corrugated asbestos cement sheets (third revision)
1592 : 2003 Specification for asbestos cement pressure pipes and joints (fourth revision)
1626 Specification for asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fittings
(Part 1): 1994 Pipes and pipe fittings (second revision)
(Part 2): 1994 Gutters and gutter fittings (second revision)
(Part 3): 1994 Roofing fittings (second revision)
2096 : 1992 Specification for asbestos cement flat sheets (first revision)
2098 : 1997 Specification for asbestos cement building boards (first revision)
5913 : 2003 Methods of test for asbestos cement products (second revision)
6908 : 1991 Specification for asbestos cement
pipes and fittings for sewerage and drainage (first revision)
7639 : 1975 Method of sampling asbestos cement products
9627 : 1980 Specification for asbestos cement pressure pipes (light duty)
13000 : 1990 Specification for silica-asbestos- cement flat sheets
13008 : 1990 Specification for shallow corrugated asbestos cement sheets
iii) Other Fibre Cement Products IS No. Title
14862 : 2000 Specification for fibre cement flat sheets
14871 : 2000 Specification for products in fibre reinforced cement long corrugated or asymmetrical section sheets and fittings for roofing and cladding
iv) Concrete Pipes and Pipes Lined/Coated with Concrete or Mortar IS No. Title
458 : 2003 Specification for precast concrete pipes (with and without reinforcement) (fourth revision)
784 : 2001 Specification for prestressed concrete pipes (including specials) (second revision)
1916 : 1989 Specification for steel cylinder pipe with concrete lining and coating (first revision)
3597 : 1998 Methods of test for concrete pipes (second revision)
4350 : 1967 Specification for concrete porous pipes for under drainage
7319 : 1974 Specification for perforated concrete pipes
7322 : 1985 Specification for specials for steel cylinder reinforced concrete pipes (first revision)
15155 : 2002 Specification for bar/wire wrapped steel cylinder pipe with mortar lining and coating
b) Resin Matrix Products IS No. Title
1998 : 1962 Methods of test for thermosetting synthetic resin bonded laminated sheets
2036 : 1995 Specification for phenolic laminated sheets (second revision)
IS No. Title
2046 : 1995 Specification for decorative thermosetting synthetic resin bonded laminated sheets (second revision)
IS No. Title
694 : 2010 Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 V (fourth revision)
1554 Specification for PVC insulated (heavy duty) electric cables
(Part 1): 1988 For working voltages up to and including 1 100 volts (third revision)
(Part 2): 1988 For working voltages from 3.3 kV up to and including 11 kV (second revision)
3961 Recommended current rating for cables
(Part 1): 1967 Paper-insulated lead-sheathed cables
(Part 2): 1967 PVC-insulated and PVC-sheathed heavy duty cables
(Part 3): 1968 Rubber insulated cables
(Part 5) : 1968 PVC insulated light duty cables 4289 Specification for flexible cables for lifts and other flexible connections
(Part 1): 1984 Elastomer insulated cables (first revision)
(Part 2) : 2000 PVC insulated circular cables 7098 Specification for cross-linked polyethylene insulated sheathed cables
(Part 1): 1988 For working voltage up to and including 1 100 V (first revision)
(Part 2) : 2011 For working voltages form 3.3 kV up to and including 33 kV (second revision)
(Part 3): 1993 For working voltages from 66 kV upto and including 220 kV
8130 : 2013 Specification for conductors for insulated electric cables and flexible cords (second revision)
9968 Specification for elastomer-insulated cables
(Part 1): 1988 For working voltages up to and including 1 100 V (first revision)
IS No. Title
(Part 2): 2002 For working voltages from 3.3 kV up to and including 33 kV (first revision) 10810 Methods of test for cables
(Part 0): 1984 General
(Part 1): 1984 Annealing test for wires used in conductors
(Part 2): 1984 Tensile test for aluminium wires
(Part 3): 1984 Wrapping test for aluminium wires
(Part 4): 1984 Persulphate test of conductor
(Part 5): 1984 Conductor resistance test
(Part 6): 1984 Thickness of thermoplastic and elastomeric insulation and sheath
(Part 7): 1984 Tensile strength and elongation at break of thermoplastic and elastomeric insulation and sheath
(Part 8): 1984 Breaking strength and elongation at break for impregnated paper insulation
(Part 9): 1984 Tear resistance for paper insulation
(Part 10): 1984 Loss of mass test
(Part 11): 1984 Thermal ageing in air
(Part 12): 1984 Shrinkage test
(Part 13): 1984 Ozone resistance test
(Part 14): 1984 Heat shock test
(Part 15): 1984 Hot deformation test
(Part 16): 1986 Accelerated ageing test by oxygen pressure method
(Part 17): 1986 Tear resistance test for heavy duty sheath
(Part 19): 1984 Bleeding and blooming test
(Part 20): 1984 Cold bend test
(Part 21): 1984 Cold impact test
(Part 22): 1984 Vicat softening point
(Part 23): 1984 Melt-flow index
(Part 24): 1984 Water soluble impurities test of insulating paper
(Part 25): 1984 Conductivity of water extract test of insulating paper
(Part 26): 1984 pH value of water extract test of insulating paper
(Part 27): 1984 Ash content test of insulating paper
(Part 28): 1984 Water absorption test (Electrical)
(Part 29): 1984 Environmental stress cracking test
(Part 30): 1984 Hot set test
IS No. Title
(Part 31): 1984 Oil resistance test
(Part 32): 1984 Carbon content test for polyethylene
(Part 33): 1984 Water absorption test (Gravimetric)
(Part 34): 1984 Measurement of thickness of metallic sheath
(Part 35): 1984 Determination of tin in lead alloy for sheathing
(Part 36): 1984 Dimensions of armouring material
(Part 37): 1984 Tensile strength and elongation at break of armouring materials
(Part 38) : 1984 Torsion test on galvanized steel wires for armouring
(Part 39): 1984 Winding test on galvanized steel strips for armouring
(Part 40): 1984 Uniformity of zinc coating on steel armour
(Part 41): 1984 Mass of zinc coating on steel armour
(Part 42): 1984 Resistivity test of armour wires and strips and conductance test of armour (wires/strips)
(Part 43): 1984 Insulation resistance
(Part 44): 1984 Spark test
(Part 45): 1984 High voltage test
(Part 46): 1984 Partial discharge test
(Part 47): 1984 Impulse test
(Part 48): 1984 Dielectric power factor test
(Part 49): 1984 Heating cycle test
(Part 50): 1984 Bending test
(Part 51): 1984 Dripping test
(Part 52): 1984 Drainage test
(Part 53): 1984 Flammability test
(Part 54): 1984 Static flexibility test
(Part 55): 1986 Abrasion test
(Part 56): 1987 Accelerated ageing by the air-pressure method
(Part 57): 1987 Flexing test
(Part 58): 1998 Oxygen index test
(Part 59): 1988 Determination of the amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
(Part 60): 1988 Thermal stability of PVC insulation and sheath
(Part 61): 1988 Flame retardant test
(Part 62): 1993 Fire resistance test for bunched cables
(Part 63): 1993 Smoke density of electric cables under fire conditions
IS No. Title
(Part 64) : 2003 Measurement of temperature index 12943 : 1990 Brass glands for PVC cables
a) Wooden Doors, Windows and Ventilators
IS No. Title
1003 Specification for timber panelled and glazed shutters
(Part 1): 2003 Door shutters (fourth revision)
(Part 2): 1994 Window and ventilator shutters (third revision)
2191 Specification for wooden flush door shutters (cellular and hollow core type)
(Part 1): 1983 Plywood face panels (fourth revision)
(Part 2): 1983 Particle board face panels and hardboard face panels (third revision) 2202 Specification for wooden flush door shutters (solid core type)
(Part 1): 1999 Plywood face panels (sixth revision)
(Part 2): 1983 Particle board face panels and hardboard face panels (third revision) 4020 Method of tests for door shutters
(Part 1): 1998 General (third revision)
(Part 2): 1998 Measurement of dimensions and squareness (third revision)
(Part 3): 1998 Measurement of general flatness (third revision)
(Part 4): 1998 Local planeness test (third revision)
(Part 5): 1998 Impact indentation test (third revision)
(Part 6): 1998 Flexure test (third revision)
(Part 7): 1998 Edge loading test (third revision)
(Part 8): 1998 Shock resistance test (third revision)
(Part 9): 1998 Buckling resistance test (third revision)
(Part 10): 1998 Slamming test (third revision)
(Part 11): 1998 Misuse test (third revision)
(Part 12): 1998 Varying humidity test (third revision)
(Part 13): 1998 End immersion test (third revision)
(Part 14): 1998 Knife test (third revision)
(Part 15): 1998 Glue adhesion test (third revision)
(Part 16): 1998 Screw withdrawal resistance test (third revision)
4021:1995 Specification for timber door, window and ventilator frames
IS No. Title
6198 : 1992 Specification for ledged, braced and battened timber shutters (second revision)
b) Metal Doors, Windows and Ventilators IS No. Title
1038 : 1983 Specification for steel doors, windows and ventilators (third revision)
1361 : 1978 Specification for steel windows for industrial buildings (first revision)
1948 : 1961 Specification for aluminium doors, windows and ventilators
1949 : 1961 Specification for aluminium windows for industrial buildings
4351 : 2003 Specification for steel door frames (second revision)
6248 : 1979 Specification for metal rolling shutters and rolling grills (first revision)
7452 : 1990 Specification for hot rolled steel sections for doors, windows and ventilators (second revision)
10451 : 1983 Specification for steel sliding shutters (top hung type)
10521 : 1983 Specification for collapsible gates
c) Plastic Doors and Windows IS No. Title
14856 : 2000 Specification for glass fibre reinforced (GRP) panel type door shutters for internal use
15380 : 2003 Specification for moulded raised high density fibre (HDF) panel doors
15931 : 2012 Specification for solid panel foam UPVC door shutters
d) Concrete Door and Window Frames IS No. Title
6523 : 1983 Specification for precast reinforced concrete door and window frames (first revision)
e) Other Composite Material Doors and Windows IS No. Title
16073 : 2013 Specification for bamboo-jute composite panel door shutter
16074 : 2014 Specification for steel flush door shutters
16096 : 2013 Specification for phenol bonded bamboo-jute composite hollow door shutter
f) Fire Check Doors IS No. Title
3614 Specification for fire-check doors
(Part 1): 1966 Plate, metal covered and rolling type
(Part 2) : 1992 Metallic and non-metallic fire check doors — Resistance test and performance criteria
g) Mesh/Net for Mosquito/Vector Prevention IS No. Title
1568 : 1970 Specification for wire cloth for general purposes (first revision)
3150 : 1982 Specification for hexagonal wire netting for general purposes (second revision)
11199 : 1985 Specification for HDPE monofilament twine door nets
IS No. Title
371 : 1999 Specification for ceiling roses (third revision)
374 : 1979 Specification for electric ceiling type fans and regulators (third revision)
418 : 2004 Specification for tungsten filament lamp for domestic and similar general lighting purposes (fourth revision)
1258 : 2005 Specification for bayonet lamp holders (fourth revision)
1293 : 2005 Specification for plugs and socket-outlets of rated voltage up to and including 250 volts and rated current up to and including 16 amperes (third revision)
1554 PVC insulated (heavy duty) electric cables
(Part 1): 1988 For working voltages upto and including 1 100 V (third revision)
(Part 2): 1988 For working voltages from 3.3 kV upto and including 11 kV (second revision)
2086 : 1993 Specification for carriers and bases used in re-wirable type electric fuses up to 650 volts (third revision)
2206 (Part 1) : Specification for flameproof electric lighting fittings: Well glass and bulkhead types (first revision) 1984
| IS No. | Title | IS No. | Title |
| 2215 : 2006 | Specification for starters for fluorescent lamps (third revision) | (Part 1) : 1980 | General requirements |
| 2215 : 2006 | Specification for starters for fluorescent lamps (third revision) | (Part 2) : 1981 | Rigid steel conduits |
| 2412 : 1975 | Specification for link clips for electrical wiring (first revision) | (Part 3) : 1983 | Rigid plain conduits for insulating materials |
| 2418 | Specification for tubular fluorescent lamps for general lighting services | (Part 4) : 1983 | Pliable self-recovering conduits for insulating materials |
| (Part 1) : 1977 | Requirements and tests (first revision) | (Part 5) : 2000 | Pliable conduits of insulating materials |
| (Part 2) : 1977 | Standard lamp data sheets (first revision) | (Part 6) : 2000 | Pliable conduits of metal or composite materials |
| (Part 3) : 1977 | Dimensions of G-5 and G-13 bi-pin caps (first revision) | (Part 8) : 2003 | Rigid non threadable conduits of aluminium alloy |
| (Part 4) : 1977 | Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision) | 9926 : 1981 | Specification for fuse wires used in rewirable type electric fuses up to 650 volts |
| 2675 : 1983 | Specification for enclosed distribution fuseboards and cutouts for voltages not exceeding 1 000 V (second revision) | 10322 | Specification for luminaires |
| 2675 : 1983 | Specification for enclosed distribution fuseboards and cutouts for voltages not exceeding 1 000 V (second revision) | (Part 1) : 2014 | General requirements and tests (first revision) |
| 3323 : 1980 | Specification for bi-pin lamp holders for tubular fluorescent lamps (first revision) | (Part 2) : 1982 | Constructional requirements |
| 3323 : 1980 | Specification for bi-pin lamp holders for tubular fluorescent lamps (first revision) | (Part 3) : 1984 | Screw and screwless terminations |
| 3324 : 1982 | Specification for holders for starters for tubular fluorescent lamps (first revision) | (Part 4) : 1984 | Methods of tests |
| 3324 : 1982 | Specification for holders for starters for tubular fluorescent lamps (first revision) | (Part 5/Sec 1) : 2012 |
IS No. Title
7164 : 1973 Specification for stopper
13184 : 1991 Specification for mastic filler, epoxy based (two pack)
a) Concrete Flooring IS No. Title
1237 : 2012 Specification for cement concrete flooring tiles (second revision)
6073 : 2006 Specification for autoclaved reinforced cellular concrete floor and roof slabs (first revision)
13801 : 2013 Specification for chequered cement concrete tiles (first revision)
13990 : 1994 Specification for precast reinforced concrete planks and joists for flooring and roofing
14201 : 1994 Specification for precast reinforced concrete channel units for construction of floors and roofs
15658 : 2006 Specification for precast concrete blocks for paving
b) Flooring Compositions IS No. Title
657 : 1982 Specification for materials for use in the manufacture of magnesium oxychloride flooring compositions (second revision)
9162 : 1979 Methods of tests for epoxy resin, hardeners and epoxy resin composition for floor topping
9197 : 1979 Specification for epoxy resin, hardness and epoxy resin compositions for floor topping
10132 : 1982 Method of test for materials for use in the preparation of magnesium oxychloride flooring composition
c) Linoleum Flooring IS No. Title
653 : 1992 Specification for linoleum sheets and tiles (third revision)
9704 : 1980 Methods of tests for linoleum sheets and tiles
d) Rubber Flooring IS No. Title
e) Stone Flooring IS No. Title
1128 : 1974 Specification for limestone (slab and tiles) (first revision)
1130 : 1969 Specification for marble (blocks, slabs and tiles)
3316 : 1974 Specification for structural granite (first revision)
3622 : 1977 Specification for sand stone (slabs and tiles) (first revision)
14223 (Part 1): Specification for polished building 1994 stones: Part 1 Granite
f) Bituminous Flooring IS No. Title
1195 : 2002 Specification for bitumen mastic for flooring (third revision)
5317 : 2002 Specification for pitch-mastic for bridge decking and roads (second revision)
8374 : 1977 Specification for bitumen mastic, anti-static and electrically conducting grade
9510 : 1980 Specification for bitumen mastic acid resisting grade
13026 : 1991 Specification for bitumen mastic for flooring for industries handling LPG and other light hydrocarbon products
15194 : 2002 Specification for pitch-mastic flooring for industries handling heavy hydrocarbon products like kerosene, diesel and furnace oil
g) Plastic Flooring IS No. Title
3461 : 1980 Specification for PVC asbestos floor tiles (first revision)
3462 : 1986 Specification for unbacked flexible PVC flooring (second revision)
3464 : 1986 Methods of test for plastic flooring and wall tiles (second revision)
h) Ceramic/Vitreous Flooring and Wall Finishing IS No. Title
2333 : 1992 Specification for plaster of Paris for ceramic industry (second revision)
4457 : 2007 Specification for ceramic unglazed vitreous acid resisting tile (second revision)
13630 Ceramic tiles — Methods of test, sampling and basis for acceptance
(Part 1): 2006 Determination of dimensions and surface quality (first revision)
(Part 2): 2006 Determination of water absorption and bulk density (first revision)
(Part 3) : 2006 Determination of moisture expansion using boiling water — Unglazed tiles (first revision)
(Part 4): 2006 Determination of linear thermal expansion (first revision)
(Part 5): 2006 Determination of resistance to thermal shock (first revision)
(Part 6): 2006 Determination of modulus of rupture and breaking strength (first revision)
(Part 7): 2006 Determination of chemical resistance — Unglazed tiles (first revision)
(Part 8): 2006 Determination of chemical resistance — Glazed tiles (first revision)
(Part 9): 2006 Determination of crazing resistance — Glazed tiles (first revision)
(Part 10): 2006 Determination of frost resistance (first revision)
(Part 11): 2006 Determination of resistance to surface abrasion — Glazed tiles (first revision)
(Part 12): 2006 Determination of resistance to deep abrasion — Unglazed tiles (first revision)
(Part 13): 2006 Determination of scratch hardness of surface according to Mohs'(first revision)
(Part 14): 2006 Determination of impact resistance by measurement of coefficient of restitution
(Part 15): 2006 Ceramic tiles — Sampling and basis for acceptance
13712 : 2006 Ceramic tiles — Definitions, classifications, characteristics and marking (first revision)
15622 : 2006 Specification for pressed ceramic tiles
j) Clay Flooring IS No. Title
1478 : 1992 Specification for clay flooring tiles (second revision)
3951 Specification for hollow clay tiles for floor and roofs
(Part 1): 2009 Filler type (second revision)
(Part 2): 2009 Structural type (second revision)
k) Roofing IS No. Title
277 : 2003 Galvanized steel sheets (plain and corrugated) —Specification (sixth revision)
459 : 1992 Specification for corrugated and semi-corrugated asbestos cement sheets (third revision)
654 : 1992 Specification for clay roofing tiles, Mangalore pattern (third revision)
1464 : 1992 Specification for clay ridge and ceiling tiles (second revision) 2690 Specification for burnt clay flat terracing tiles
(Part 1): 1993 Machine made (second revision)
(Part 2): 1992 Handmade (second revision)
3951 Specification for hollow clay tiles for floor and roofs
(Part 1): 2009 Filler type (second revision)
(Part 2): 2009 Structural type (second revision)
6073 : 2006 Specification for autoclaved reinforced cellular concrete floor and roof slabs (first revision)
6250 : 1981 Specification for roofing slate tiles (first revision)
10388 : 1982 Specification for corrugated coir wood wool cement roofing sheets
12583 : 1988 Specification for corrugated bitumen roofing sheets
12866 : 1989 Specification for plastic translucent sheets made from thermosetting polyester resin (glass fibre reinforced)
13317 : 1992 Specification for clay roofing country tiles, half round and flat tiles
13990 : 1994 Specification for precast reinforced concrete planks and joists for flooring and roofing
14201 : 1994 Specification for precast reinforced concrete channel units for construction of floors and roofs
14241 : 1995 Specification for precast L-Panel units for roofing
m) Other Floorings and Roofings IS No. Title
4456 Methods of test for chemical resistant mortars
(Part 1): 1967 Silicate type and resin type
(Part 2): 1967 Sulphur type
IS No. Title
4457 : 2007 Specification for ceramic unglazed vitreous acid resisting tile (second revision)
4832 Specification for chemical resistant mortars
(Part 1): 1969 Silicate type
(Part 2): 1969 Resin type
(Part 3): 1968 Sulphur type
4860 : 1968 Specification for acid resistant bricks
14862 : 2000 Specification for fibre cement flat sheets
14143 : 1994 Specification for prefabricated brick panel and partially precast concrete joist for flooring and roofing
14871 : 2000 Specification for products in fibre reinforced cement — Long corrugated or asymmetrical section sheets and fittings for roofing and cladding
n) Wall Coverings/Finishing IS No. Title
1542 : 1992 Specification for sand for plaster (second revision)
3952 : 2013 Specification for burnt clay hollow bricks and blocks for walls and partitions (third revision)
4456 Methods of test for chemical resistant mortars
(Part 1): 1967 Silicate type and resin type
(Part 2): 1967 Sulphur type
4832 Specification for chemical resistant mortars
(Part 1): 1969 Silicate type
(Part 2): 1969 Resin type
(Part 3): 1968 Sulphur type
15418 : 2003 Specification for finished wall papers, wall vinyls and plastic wall coverings in roll form
2553 (Part 1): Specification for safety glass: Part 1 1990 General purpose (third revision)
2835 : 1987 Specification for flat transparent sheet glass (third revision)
3438 : 1994 Specification for silvered glass mirrors for general purposes (second revision)
IS No. Title
5437 : 1994 Specification for figured rolled and wired glass (first revision)
14900 : 2000 Specification for transparent float glass
2095 Specification for gypsum plaster boards
(Part 1): 2011 Plain gypsum plaster boards (third revision)
(Part 2): 2001 Coated/laminated gypsum plaster boards (second revision)
(Part 3): 1996 Reinforced gypsum plaster boards (second revision)
2542 Methods of test for gypsum plaster, concrete and products
(Part 1/Sec 1): Plaster and concrete, Section 1 1978 Normal consistency of gypsum plaster (first revision)
(Part 1/Sec 2): Plaster and concrete, Section 2 1978 Normal consistency of gypsum concrete (first revision)
(Part 1/Sec 3): Plaster and concrete, Section 3 1978 Setting time of plaster and concrete (first revision)
(Part 1/Sec 4): Plaster and concrete, Section 4 1978 Transverse strength of gypsum plaster (first revision)
(Part 1/Sec 5): Plaster and concrete, Section 5 1978 Compressive strength and dry set density of gypsum plaster (first revision)
(Part 1/Sec 6): Plaster and concrete, Section 6 1978 Soundness of gypsum plaster (first revision)
(Part 1/Sec 7): Plaster and concrete, Section 7 1978 Mechanical resistance of gypsum plaster by dropping ball test (first revision)
(Part 1/Sec 8): Plaster and concrete, Section 8 1978 Freedom from coarse particles (first revision)
(Part 1/Sec 9): Plaster and concrete, Section 9 1978 Expansion of plaster (first revision)
(Part 1/Sec 10): Plaster and concrete, Section 10 Sand 1978 in set plaster (first revision)
(Part 1/Sec 11): Plaster and concrete, Section 11 1978 Wood fibre content in gypsum plaster (first revision) NATIONAL BUILDING CODE OF INDIA 2016
(Part 1/Sec 12): Plaster and concrete, Section 12 Dry 1978 bulk density (first revision)
(Part 2/Sec 1): Gypsum products, Section 1 1981 Measurement of dimensions (first revision)
(Part 2/Sec 2): Gypsum products, Section 2 1981 Determination of mass (first revision)
(Part 2/Sec 3): Gypsum products, Section 3 1981 Determination of mass and thickness of paper surfacing (first revision)
(Part 2/Sec 4): Gypsum products, Section 4 1981 Transverse strength (first revision)
(Part 2/Sec 5): Gypsum products, Section 5 1981 Compressive strength (first revision)
(Part 2/Sec 6): Gypsum products, Section 6 Water absorption (first revision) 1981
(Part 2/Sec 7): Gypsum products, Section 7 1981 Moisture content (first revision)
(Part 2/Sec 8): Gypsum products, Section 8 Nail retention of precast reinforced gypsum slabs (first revision) 1981 2547 Specification for gypsum building plaster
(Part 1): 1976 Excluding premixed lightweight plaster (first revision)
(Part 2): 1976 Premixed lightweight plaster (first revision)
2849 : 1983 Specification for non-load bearing gypsum partition blocks (solid and hollow types) (first revision)
8272 : 1984 Specification for gypsum plaster for use in the manufacture of fibrous plasterboards (first revision)
9498 : 1980 Specification for inorganic aggregates for use in gypsum plaster
12679 : 1989 Specification for by-product gypsum for use in plaster, blocks and boards
2116 : 1980 Specification for sand for masonry mortars (first revision)
2250 : 1981 Code of Practice for preparation and use of masonry mortars (first revision)
3085 : 1965 Method of test for permeability of cement mortar and concrete
IS No. Title
4098 : 1983 Specification for lime-pozzolana mixture (first revision)
4456 Methods of test for chemical resistant mortars
(Part 1): 1967 Silicate type and resin type
(Part 2) : 1967 Sulphur type 4832 Chemical resistant mortars
(Part 1): 1969 Silicate type
(Part 2): 1969 Resin type
(Part 3): 1968 Sulphur type
13077 : 1991 Guide for preparation and use of mud mortar in masonry
14959 Method of test determination of water soluble and acid soluble chlorides in mortar and concrete
(Part 1): 2001 Fresh mortar and concrete
(Part 2): 2001 Hardened mortar and concrete
Every material used in fulfillment of the requirements of this Part, unless otherwise specified in the Code or approved, shall conform to the relevant Indian Standards. A list of Indian Standard specifications as the ‘accepted standards’ is given at the end of this Part of the Code. At the time of publication of the Code, the editions indicated were valid. All standards are subject to amendments and revisions. The Authority shall take cognizance of such amendments and revisions. The latest version of the specification shall, as far as possible, be adopted at the time of enforcement of this Part of the Code.
a) Water Based Paints and Pigments IS No. Title
427 : 2013 Specification for distemper, dry, colour as required (third revision)
428 : 2013 Specification for washable distemper (third revision)
5410 : 2013 Specification for cement paint (second revision)
15489 : 2013 Specification for paint, plastic emulsion (first revision)
b) Ready Mixed Paints, Enamels and Powder Coatings IS No. Title
101 Methods of sampling and test for paints, varnishes and related products
(Part 1/Sec 1): Test on liquid paints (general and 1986 (general and physical), Section 1 Sampling (third revision)
(Part 1/Sec 2): Test on liquid paints (general and physical), Section 2 Preliminary examination and preparation of samples for testing (third revision)
(Part 1/Sec 3): Test on liquid paints (general and physical), Section 3 Preparation of panels (third revision)
(Part 1/Sec 4): Test on liquid paints (general and physical), Section 4 Brushing test (third revision)
IS No.
Title
IS No. Title
(Part 1/Sec 5): Test on liquid paints (general and physical), Section 5 Consistency (third revision)
(Part 1/Sec 6): Test on liquid paints (general and physical), Section 6 Flash point (third revision)
(Part 1/Sec 7): Test on liquid paints (general and physical), Section 7 Mass per 10 litres (third revision)
(Part 2/Sec 1): Test on liquid paints (Chemical examination), Section 1 Water content (third revision) 1988
(Part 2/Sec 2): Test on liquid paints (Chemical examination), Section 2 Volatile matter (third revision) 1986
(Part 3/Sec 1): Tests on paint film formation, Section 1986 1 Drying time (third revision)
(Part 3/Sec 2): Tests on paint film formation, Section 1989 2 Film thickness (third revision)
(Part 3/Sec 4): Tests on paint film formation, Section 1987 4 Finish (third revision)
(Part 3/Sec 5): Tests on paint film formation, Section 1987 5 Fineness of grind (third revision)
(Part 4/Sec 1): Optical test, Section 1 Opacity (third 1988 revision)
(Part 4/Sec 2): Optical test, Section 2 Colour (third 1989 revision)
(Part 4/Sec 3): Optical test, Section 3 Light fastness 1988 test (third revision)
(Part 4/Sec 4): Optical test, Section 4 Gloss (third revision) 1988
(Part 5/Sec 1): Mechanical test on paint films, Section 1 Hardness tests (third revision)
(Part 5/Sec 2): Mechanical test on paint films, Section 2 Flexibility and adhesion (third revision)
(Part 5/Sec 3): Mechanical test on paint films, Section 3 Impact resistance (fourth revision)
(Part 5/Sec 4): Mechanical test on paint films, Section 4 Print free test (third revision)
(Part 6/Sec 1): Durability tests, Section 1 Resistance to humidity under conditions of 1988
(Part 6/Sec 2): Durability tests, Section 2 Keeping properties (third revision) 1989
(Part 6/Sec 3): Durability tests, Section 3 Moisture 1990 vapour permeability (third revision)
(Part 6/Sec 4): Durability tests, Section 4 1991 Degradation of coatings (pictorial aids for evaluation) (third revision)
(Part 6/Sec 5): Durability tests, Section 5 1997 Accelerated weathering test
(Part 7/Sec 1): Environmental tests on paint films, Section 1 Resistance to water (third revision)
(Part 7/Sec 2): Environmental tests on paint films, Section 2 Resistance to liquids (third revision)
(Part 7/Sec 3): Environmental tests on paint films, Section 3 Resistance to heat (third revision)
(Part 7/Sec 4): Environmental tests on paint films, 1990 Section 4 Resistance to bleeding of pigments (third revision)
(Part 8/Sec 1): Tests for pigments and other solids, Section 1 Residue on sieve (third revision)
(Part 8/Sec 2): Tests for pigments and other solids, Section 2 Pigments and non-volatile matter (third revision) 1990
(Part 8/Sec 3): Tests for pigments and other solids, 1993 Section 3 Ash content (third revision)
(Part 8/Sec 4): Tests for pigments and other solids, 2015 Section 4 Phthalic anhydride (fourth revision)
(Part 8/Sec 5): Tests for pigments and other solids, Section 5 Lead restriction test (third revision)
(Part 8/Sec 6): Tests for pigments and other solids, 1993 Section 6 Volume solids
(Part 9/Sec 1): Tests for lacquers and varnish, 1993 Section 1 Acid value (third revision)
(Part 9/Sec 2): Tests for lacquers and varnish, 1993 Section 2 Rosin test (third revision)
104 : 1979 Specification for ready mixed paint, brushing, zinc chrome, priming (second revision)
| IS No. | Title | IS No. | Title |
| 109 : 1968 | Specification for ready mixed paint, brushing, priming, plaster to Indian Standard colours No. 361 and 631 (first revision) | 3539 : 1966 | 410, 442, 444, 628, 631, 632, 634, 693, 697, white and black |
| 133 : 2004 | Specification for enamel, interior (a) undercoating, (b) finishing (fourth revision) | Specification for ready mixed paint, undercoating, for use under oil finishes, to Indian Standard colours, as required | |
| 133 (Part 1) : 2013 | Specification for enamel, interior (a) undercoating, (b) finishing : Part 1 For household and decorative purposes (fifth revision) | 3585 : 1966 | Specification for ready mixed paint, aluminium, brushing, priming, water resistant, for wood work |
| 137 : 1965 | Specification for ready mixed paint, brushing, matt or egg-shell flat, finishing, interior, to Indian Standard colour, as required (revised) | 3678 : 1966 | Specification for ready mixed paint, thick white, for lettering |
| 158 : 2015 | Specification for ready mixed paint, brushing, bituminous, black, lead-free, acid, alkali, and heat resisting (fourth revision) | 9862 : 1981 | Specification for ready mixed paint, brushing, bituminous black lead free, acid, alkali, water and chlorine resisting |
| 164 : 1981 | Specification for ready mixed paint for road marking (second revision) | 11883 : 1986 | Specification for ready mixed paint, brushing, red oxide, priming for metals |
| 168 : 1993 | Specification for ready mixed paint, air-drying semi-glossy/matt, for general purposes (third revision) | 12744 (Part 1) : 2013 | Specification for ready mixed paint, air drying, red oxide, zinc phosphate, priming: Part 1 for domestic and decorative applications (fourth revision) |
| 341 : 1973 | Specification for black Japan, Types A, B and C (first revision) | Specification for aluminium paints, heat resistant | |
| 2074 : 1992 | Specification for ready mixed paint, air drying red oxide-zinc chrome, priming (second revision) | 13183 : 1991 | Specification for polyurethane full gloss enamel (two pack) |
| 2075 : 2000 | Specification for ready mixed paint, stoving, red oxide-zinc chrome, priming (second revision) | 13607 : 1992 | Specification for ready mixed paint, finishing, general purposes, synthetic |
| 2339 : 2013 | Specification for aluminium paint for general purposes (first revision) |
5667 : 1970 Specification for thinner for cellulose nitrate based paints and lacquers
14314 : 1995 Specification for thinner general purposes for synthetic paints and varnishes
IS No. Title
337 : 1975 Specification for varnish, finishing, interior (first revision)
344 : 1976 Specification for varnish, stoving (first revision)
347 : 1975 Specification for varnish, shellac, for general purposes (first revision)
348 : 1968 Specification for French polish (first revision)
524 : 1983 Specification for varnish, finishing, exterior, synthetic (second revision)
525 : 1968 Specification for varnish, finishing, exterior and general purposes (first revision)
642 : 1963 Specification for varnish medium for aluminium paint (revised)
10018 : 1981 Specification for lacquer, cellulose, nitrate clear, finishing, glossy for wood
1998 : 1962 Methods of test for thermosetting synthetic resin bonded laminated sheets
2036 : 1995 Specification for phenolic laminated sheets (second revision)
2046 : 1995 Specification for decorative thermosetting synthetics resin bonded laminated sheets (second revision)
2076 : 1981 Specification for unsupported polyvinyl chloride sheeting (first revision)
2508 : 1984 Specification for low density polyethylene films (second revision)
6307 : 1985 Specification for rigid PVC sheets (first revision)
10889 : 2004 Specification for high density polyethylene films (first revision)
12830 : 1989 Specification for rubber based adhesives for fixing PVC tiles to cement
13162 Methods of test for geotextiles
(Part 2): 1991 Determination of resistance to exposure of ultra-violet light and water (Xenon arc type apparatus)
(Part 3): 1992 Determination of thickness at specified pressure
(Part 4): 1992 Determination of puncture resistance by falling cone method
(Part 5): 1992 Determination of tensile properties using a wide width strip
13262 : 1992 Specification for pressure sensitive adhesive tapes with plastic base
13325 : 1992 Method of test for the determination to tensile properties of extruded polymer geogrids using the wide strip
13326 (Part 1): Method of test for the evaluation of interface friction between geosynthetics and soil: Part 1 Modified direct shear technique 1992
14182 : 1994 Specification for solvent cement for use with unplasticized polyvinyl-chloride plastic pipe and fittings
14293 : 1995 Method of test for trapezoid tearing – Geotextiles
14294 : 1995 Method of determination of apparent opening size by dry sieving technique – Geotextiles
14324 : 1995 Method of test for determination of water permeability-permittivity — Geotextiles
14443 : 1997 Specification for polycarbonate sheets
14500 : 1998 Specification for linear low-density polyethylene (LLDPE) films
IS No. Title
779 : 1994 Specification for water meters (domestic type) (sixth revision)
2373 : 1981 Specification for water meters (bulk type) (third revision)
6784 : 1996 Method for performance testing of water meters (domestic type) (second revision)
1030 : 1998 Carbon steel castings for general engineering purposes (fifth revision)
1136 : 2008 Preferred sizes for wrought metal products (third revision)
1762 (Part 1): Code for designation of steels: Part 1 1974 Based on letter symbols (first revision)
2049 : 1978 Colour code for the identification of wrought steel for general engineering purposes (first revision)
2644 : 1994 High tensile steel castings (fourth revision)
2708 : 1993 Specification for 1.5 percent manganese steel castings for general engineering purposes (third revision)
7598 : 1990 Classification of steels (first revision) 10461 Resistance to inter-granular corrosion
(Part 1): 1994 Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (first revision)
(Part 2): 1994 Corrosion test in a sulphuric acid/copper sulphate medium in the presence of copper turnings (Monypenny Strauss Test) (first revision)
b) Structural Steel IS No. Title
2062 : 2011 Specification for hot rolled medium and high tensile structural steel (seventh revision)
2830 : 2012 Specification for carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes (third revision)
2831 : 2012 Specification for carbon steel cast billets ingots, blooms and slabs for re-rolling into structural steel (Ordinary quality) (fourth revision)
8052 : 2006 Specification for steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications (second revision)
8952 : 1995 Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes (first revision)
11587 : 1986 Specification for structural weather resistant steels
15103 : 2002 Fire resistant steel
15911 : 2010 Structural steel (Ordinary quality)
15962 : 2012 Structural steels for buildings and structures with improved seismic resistance
c) Sheet and Strip IS No. Title
277 : 2003 Specification for galvanized steel sheets (plain and corrugated) (sixth revision)
412 : 1975 Specification for expanded metal steel sheets for general purposes (second revision)
513 : 2008 Specification for cold reduced low carbon steel sheets and strips (fifth revision)
1079 : 2009 Specification for hot rolled carbon steel sheet and strip (sixth revision)
6911 : 1992 Stainless steel plate, sheet and strip (first revision)
a) Structural Shapes IS No. Title
811 : 1987 Specification for cold formed light gauge structural steel sections (revised)
1173 : 1978 Specification for hot rolled and slit steel tee bars (second revision)
1863 : 1979 Specification for hot rolled steel bulb flats (first revision)
2314 : 1986 Specification for steel sheet piling sections (first revision)
3443 : 1980 Specification for crane rail sections (first revision)
3908 : 1986 Specification for aluminium equal leg angles (first revision)
3909 : 1986 Specification for aluminium unequal leg angles (first revision)
| IS No. | Title | IS No. | Title |
| 3921 : 1985 | Specification for aluminium channels (first revision) | and aluminium alloys, bar, rod and section (first revision) | |
| 3964 : 1980 | Specification for light rails (first revision) | 6477 : 1983 | Dimensions for wrought aluminium and aluminium alloys, extruded hollow sections (first revision) |
| 5384 : 1985 | Specification for aluminium I-beams (first revision) | IS/ISO 7452 : 2002 | Hot-rolled structural steel plates — Tolerances on dimensions and shape |
| 6445 : 1985 | Specification for aluminium tee sections (first revision) | 12778 : 2004 | Hot rolled parallel flange steel sections for beams, columns and bearing piles — Dimensions and section properties (first revision) |
| b) Dimensional Standards | |||
| IS No. | Title | ||
| 808 : 1989 | Dimensions for hot rolled steel beam, column channel and angle sections (third revision) | 12779 : 1989 | Rolling and cutting tolerances for hot rolled parallel flange beam and column sections |
| 1730 : 1989 | Dimensions for steel plates, sheets strips and flats for general engineering purposes (second revision) | IS/ISO 16124 : 2004 | Steel wire rod — Dimensions and tolerances |
| 1732 : 1989 | Dimensions for round and square steel bars for structural and general engineering purposes (second revision) | ||
| 1838 |
| Specification for preformed fillers for expansion joint in concrete pavements and structures (non extruding and resilient type) |
| (Part 11) : 1988 | Determination of density (first revision) |
| (Part 12) : 1988 | Determination of air content of hydraulic cement mortar (first revision) | (Part 1) : 1983 | Bitumen impregnated fibre (first revision) |
| (Part 2) : 1984 | CNSL aldehyde resin and coconut pith |
| (Part 13) : 1988 | Measurement of water retentivity of masonry cement (first revision) | (Part 3) : 2011 | Polymer based |
| (Part 14) : 1989 | Determination of false set | 10566 : 1983 | Methods of test for preformed fillers for expansion joints in concrete paving and structural construction |
| (Part 15) : 1991 | Determination of fineness by wet sieving | 11433 | Specification for one grade polysulphide based joint sealant |
| 4032 : 1985 | Methods of chemical analysis for hydraulic cement (first revision) | (Part 1) : 1985 | General requirements |
| 5816 : 1999 | Method of test for splitting tensile strength of concrete (first revision) | (Part 2) : 1986 | Methods of test |
| 8142 : 1976 | Methods of test for determining setting time of concrete by penetration resistance | 12118 | Specification for two parts polysulphide based sealants |
| (Part 1) : 1987 | General requirements |
| (Part 2) : 1987 | Methods of test |
h) Steel Reinforcement and Prestressing Steel for Concrete
| Particular requirements, Section 1 General purpose luminaires (first revision) |
| 3419 : 1988 | Specification for fittings for rigid non-metallic conduits (second revision) | (Part 5/Sec 2) : 2012 | Particular requirements, Section 2 Recessed luminaires (first revision) |
| 3480 : 1966 | Specification for flexible steel conduits for electrical wiring | (Part 5/Sec 3) : 2012 | Particular requirements, Section 3 Luminaires for road and street lighting (first revision) |
| 3528 : 1966 | Specification for waterproof electric lighting fittings | (Part 5/Sec 4) : 1987 | Particular requirements, Section 4 Portable general purpose luminaires |
| 3553 : 1966 | Specification for watertight electric lighting fittings | (Part 5/Sec 5) : 2013 | Particular requirements, Section 5 Flood light (first revision) |
| 3837 : 1976 | Specification for accessories for rigid steel conduits for electrical wiring (first revision) | (Part 5/Sec 6) : 2013 | Particular requirements, Section 6 Hand lamps |
| 3854 : 1997 | Specification for switches for domestic and similar purposes (second revision) | (Part 5/Sec 7) : 2013 | Particular requirements, Section 7 Lighting chains |
| 4160 : 2005 | Specification for interlocking switch socket outlets (first revision) | (Part 5/Sec 8) : 2013 | Particular requirements, Section 8 Emergency lighting |
| 4649 : 1968 | Specification for adaptors for flexible steel conduits | 11037 : 1984 | Electronic type fan regulators |
| 4649 : 1968 | Specification for adaptors for flexible steel conduits | 12449 | Starting devices (other than glow starters) |
| 5077 : 1969 | Specification for decorative lighting outfits | (Part 1) : 1988 | General and safety requirements |
| 8030 : 1976 | Specification for luminaires for hospitals | (Part 2) : 1988 | Performance requirements |
| 9537 | Specification for conduits for electrical installations | 12776 : 2002 | Specification for galvanized strand for earthing (first revision) |
| IS No. | Title | IS No. | Title |
| 13010 : 2002 | AC watt-hour meters, Class 0.5, 1 and 2 (first revision) | 16102 | Self ballasted LED-lamps for general lighting services |
| 13779 : 1999 | AC static watthour meters (Class 1 and 2) (first revision) | (Part 1) : 2012 | Safety requirements |
| 13779 : 1999 | AC static watthour meters (Class 1 and 2) (first revision) | (Part 2) : 2012 | Performance requirements |
| 13947 (Part 5/Sec 2) : 2004 | Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches | 16103 | LED modules for general lighting |
| 13947 (Part 5/Sec 2) : 2004 | Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches | (Part 1) : 2012 | Safety specification |
| 13947 (Part 5/Sec 2) : 2004 | Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches | (Part 2) : 2012 | Performance requirements |
| 13947 (Part 5/Sec 2) : 2004 | Specification for low-voltage switchgear and controlgear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches | 16148 : 2014 | Performance specification for metal halide lamps |
| 14763 : 2000 | Conduit for electrical purposes, outside diameters of conduits for electrical installations and threads for conduits and fittings | 16246: 2015 | Specification for elastomer insulated cables with limited circuit integrity when affected by fire |
| 14768 | Conduit fittings for electrical installations | IS/IEC 60079-1: 2007 | Explosive atmospheres — Part 1 : Equipment protection by flameproof enclosures “d” |
| (Part 1) : 2000 | General requirements | IS/IEC 60898-1: 2002 | Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for ac operation |
| (Part 2) : 2003 | Metal conduit fittings | IS/IEC 60898-1: 2002 | Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for ac operation |
| 14772 : 2000 | Enclosures for accessories for household and similar fixed electrical installations | IS/IEC 60898-1: 2002 | Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for ac operation |
| 14927 | Cable trunking and ducting systems for electrical installations | IS/IEC 60947-1: 2007 | Low voltage switchgear and controlgear — Part 1: General rules (first revision) |
| (Part 1) : 2001 | General requirements | IS/IEC 60947-2: 2003 | Low voltage switchgear and controlgear — Part 2: Circuit breakers |
| (Part 2) : 2001 | Cable trunking and ducting systems intended for mounting on walls or ceilings | IS/IEC 60947-2: 2003 | Low voltage switchgear and controlgear — Part 2: Circuit breakers |
| 14930 | Conduit systems for electrical installations | IS/IEC 60947-3: 1999 | Low voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units |
| (Part 1) : 2001 | General requirements | IS/IEC 60947-3: 1999 | Low voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units |
| (Part 2) : 2001 | Particular requirements for conduit system buried underground | IS/IEC 60794-1-1: 2001 | Optical fibre cables — Part 1: Generic specification, Section 1 General |
| 15111 | Self ballasted lamps for general lighting services: | IS/IEC 60794-1-2 : 2003 | Optical fibre cables — Part 1: Generic specification, Section 2 Basic optical cable test procedures |
| (Part 1) : 2002 | Safety requirements | IS/IEC 60794-1-2 : 2003 | Optical fibre cables — Part 1: Generic specification, Section 2 Basic optical cable test procedures |
| (Part 2) : 2002 | Performance requirements | IS/IEC 60794-2: 2002 | Optical fibre cables — Part 2 Sectional specification for indoor cables |
| 15368 : 2003 | Cable reels for household and similar purposes | IS/IEC 60794-2: 2002 | Optical fibre cables — Part 2 Sectional specification for indoor cables |
| 15518 (Part 1) : 2004 | Safety requirements for incandescent lamps: Part 1 Tungsten filament | 13. FILLERS, STOPPERS AND PUTTIES | 13. FILLERS, STOPPERS AND PUTTIES |
| 15518 (Part 1) : 2004 | Safety requirements for incandescent lamps: Part 1 Tungsten filament | IS No. | Title |
| 15518 (Part 1) : 2004 | lamps for domestic and similar general lighting purposes | 110 : 1983 | Specification for ready mixed paint, brushing, grey filler, for enamels, for use over primers (second revision) |
| 15787 : 2008 | Switch-socket-outlets (non-interlock type) | 419 : 1967 | Specification for putty for use on window frames (first revision) |
| 15968 : 2013 | Ballasts for tubular fluorescent lamps — Performance requirements | 423 : 1961 | Specification for plastic wood, for joiner's filler (revised) |
| 15974 : 2013 | Auxiliaries for lamps — Starting devices (other than glow starters) — Performance requirements | 3709 : 1966 | Specification for mastic cement for bedding of metal windows |
| 13871 : 1993 |
| Specification for powder coatings |
| 2932 (Part 1) : 2013 | Specification for enamel, synthetic, exterior (a) undercoating, (b) finishing: Part 1 For household and decorative applications (fourth revision) | 14506 : 1998 | Specification for epoxy redoxide zinc phosphate weldable primer, two component |
| 14589 : 1999 | Specification for zinc priming paint, epoxy based, two pack |
| c) Thinners and Solvents |
| 2933 (Part 1) : 2013 | Specification for enamel, exterior: (a) undercoating (b) finishing: Part 1 for domestic and decorative applications | 82 : 1973 | Methods of sampling and test for thinners and solvents for paints (first revision) |
| 3536 : 1999 | Specification for ready mixed paint, brushing, wood primer (first revision) | 430 : 1972 | Paint remover, solvent type, non-flammable (second revision) |
| 3537 : 1966 | Specification for ready mixed paint, finishing, interior for general purposes, to Indian Standard colours No. 101, 216, 217, 219, 275, 281, 352, 353, 358 to 361, 363, 364, 388, | 431 : 1972 | Paint remover, solvent type, flammable (second revision) |
| 533 : 2007 | Specification for gum spirit of turpentine (oil of turpentine) (third revision) |
14643 : 1999 Specification for unsintered polytetrafluoroethylene (PTFE) tape for thread sealing applications
14706 : 1999 Sampling and preparation of test specimen of geotextiles
14714 : 1999 Determination of abrasion resistance of geotextiles
14715 : 2000 Specification for woven jute geotextiles
14716 : 1999 Determination of mass per unit area of geotextiles
14739 : 1999 Methods for determination of creep of geotextiles
14753 : 1999 Specification for poly(methyl) methacrylate (PMMA) (Acrylic) sheets
IS No. Title
14986 : 2001 Jute geo-grid for rain water erosion control in road and railway embankments and hill slopes
15060 : 2001 Tensile test for joints/seams by wide width method of geotextiles
15351 : 2015 Specification for textiles — Laminated high density polyethylene (HDPE) woven fabric (geomembrane) for waterproof lining (second revision)
782 : 1978 Specification for caulking lead (third revision)
804 : 1967 Specification for rectangular pressed steel tanks (first revision)
1726 : 1991 Specification for cast iron manhole covers and frames (third revision)
2963 : 2013 Specification for copper alloy waste fittings and waste plug for wash-basins and sinks (second revision)
5219 : 2013 Specification for cast copper alloy traps (first revision)
5455 : 1969 Specification for cast-iron steps for manholes
5961 : 1970 Specification for cast iron gratings for drainage purposes
9140 : 1996 Method of sampling of vitreous and fire clay sanitary appliances (second revision)
9872 : 1981 Specification for precast concrete septic tanks
12592 : 2002 Specification for precast concrete manhole covers and frames (first revision)
12701 : 1996 Specification for rotational moulded polyethylene water storage tanks (first revision)
13356 : 1992 Specification for precast ferrocement water tanks (250 to 10 000 litres capacity)
14399 Hot press moulded thermosetting glass fibre reinforced (GRP) sectional water storage tanks
(Part 1): 1996 Specification for panels
(Part 2): 1996 Guidelines for assembly, installation and testing
b) Pipes and Fittings excluding valves
i) Brass and Copper Pipes and Fittings IS No. Title
407 : 1981 Specification for brass tubes for general purposes (third revision)
2501 : 1995 Specification for solid drawn copper tubes for general engineering purposes (third revision)
ii) Cast Iron Pipes and Fittings IS No. Title
1536 : 2001 Specification for centrifugally cast (spun) iron pressure pipes for water, gas and sewage (fourth revision)
1537 : 1976 Specification for vertically cast iron pressure pipes for water, gas and sewage (first revision)
1538 : 1993 Specification for cast iron fittings for pressure pipes for water, gas and sewage (third revision)
1729 : 2002 Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series (second revision)
1879 : 2010 Specification for malleable cast iron pipe fittings (third revision)
3989: 2009 Specification for centrifugally cast (spun) iron spigot and socket soil, waste and ventilating pipes, fittings and accessories (third revision)
5531: 2014 Specification for cast iron specials for asbestos-cement pressure pipes for water, gas and sewage (third revision)
6418 : 1971 Specification for cast iron and malleable cast iron flanges for general engineering purposes
7181 : 1986 Specification for horizontally cast iron double flanged pipes for water, gas and sewage (first revision)
8329 : 2000 Specification for centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage (third revision)
8794 : 1988 Specification for cast iron detachable joints for use with asbestos cement pressure pipes (first revision)
9523 : 2000 Specification for ductile iron fittings for pressure pipes for water, gas and sewage (first revision)
IS No. Title
10292 : 1988 Dimensional requirements for rubber sealing rings for C.I.D. Joints in asbestos cement piping (first revision)
10299 : 1982 Cast iron saddle pieces for service connection from asbestos cement pressure pipes
11606 : 1986 Methods of sampling cast iron pipes and fittings
12820 : 2004 Dimensional requirements of rubber gaskets for mechanical joints and push-on joints for use with cast iron pipes and fittings for carrying water, gas and sewage (first revision)
12987 : 1991 Cast iron detachable joints for use with asbestos cement pressure pipes (light duty)
12988 : 1991 Rubber sealing rings for CID joints for light duty AC pipes — Dimensional requirements
13382 : 2004 Specification for cast iron specials for mechanical and push-on flexible joints for pressure pipelines for water, gas and sewage (first revision)
15905 : 2011 Specification for hubless centrifugally cast (spun) iron pipes, fittings and accessories — Spigot series
iii) Lead Pipes and Fittings IS No. Title
404 (Part 1): Specification for lead pipes: Part 1 1993 For other than chemical purpose (third revision)
iv) Fibre Pipes and Fittings IS No. Title
11925 : 1986 Specification for pitch-impregnated fibre pipes and fittings for drainage purposes
v) Plastic Pipes and Fittings IS No. Title
4984 : 1995 Specification for high density polyethylene pipes for water supply (fourth revision)
4985 : 2000 Specification for unplasticized PVC pipes for potable water supplies (third revision)
7834 Specification for injection moulded PVC socket fittings with solvent cement joints for water supplies
IS No. Title
(Part 1): 1987 General requirements (first revision)
(Part 2) : 1987 Specific requirements for 45° elbows (first revision)
(Part 3) : 1987 Specific requirements for 90° elbows (first revision)
(Part 4): 1987 Specific requirements for 90° tees (first revision)
(Part 5): 1987 Specific requirements for 45° tees (first revision)
(Part 6): 1987 Specific requirements for sockets (first revision)
(Part 7): 1987 Specific requirements for unions (first revision)
(Part 8): 1987 Specific requirements for caps (first revision) 8008 Specification for injection moulded high density polyethylene (HDPE) fittings for potable water supplies
(Part 1): 2003 General requirements
(Part 2) : 2003 Specific requirements for 90° bends (first revision)
(Part 3): 2003 Specific requirements for 90° tees
(Part 4): 2003 Specific requirements for reducers
(Part 5): 2003 Specific requirements for ferrule reducers (first revision)
(Part 6): 2003 Specific requirements for pipe ends
(Part 7): 2003 Specific requirements for sandwich flanges
(Part 8): 2003 Specific requirements for reducing tests
(Part 9): 2003 Specific requirements for end caps (first revision) 8360 Specification for fabricated high density polyethelene (HDPE) fittings for potable water supplies
(Part 1): 1977 General requirements
(Part 2): 1977 Specific requirements for 90° tees
(Part 3): 1977 Specific requirements for 90° bends 10124 Specification for fabricated PVC-U fittings for potable water supplies
(Part 1): 2009 General requirements (second revision)
(Part 2): 2009 Specific requirements for sockets (second revision)
(Part 3): 2009 Specific requirements of straight reducers (second revision)
(Part 4): 2009 Specific requirements for caps (second revision)
(Part 5): 2009 Specific requirements for equal tees (second revision) NATIONAL BUILDING CODE OF INDIA 2016
IS No.
Title
(Part 6) : 2009 Specific requirements for flanged tail piece with metallic flanges (second revision)
(Part 7): 2009 Specific requirements for threaded adaptors (second revision)
(Part 8): 2009 Specific requirements for 90° bends (second revision)
(Part 9): 2009 Specific requirements for 60° bends (second revision)
(Part 10): 2009 Specific requirements for 45° bends (second revision)
(Part 11): 2009 Specific requirements for 30° bends (second revision)
(Part 12): 2009 Specific requirements for 22(1)/(2)° bends (second revision)
(Part 13) : 2009 Specific requirements for 11(1)/(4)° bends (second revision)
12235 Methods of test for unplasticised PVC pipes for potable water supplies
(Part 1): 2004 Measurement of dimensions (first revision)
(Part 2): 2004 Determination of Vicat softening temperature (first revision)
(Part 3): 2004 Test for opacity (first revision)
(Part 4): 2004 Determining the detrimental effect on the composition of water (first revision)
(Part 5/Sec 1): Longitudinal reversion, Section 1 2004 Determination methods (first revision)
(Part 5/Sec 2): Reversion test, Section 2 2004 Determination parameters (first revision)
(Part 6): 2004 Stress relief test (first revision)
(Part 7): 2004 Resistance to sulphuric acid (first revision)
(Part 8/Sec 1): Resistance to internal hydrostatic pressure, Section 1 Resistance to internal hydrostatic pressure at constant internal water pressure (first revision)
(Part 8/Sec 2): Resistance to internal hydrostatic pressure, Section 2 Leak-tightness of elastomeric sealing ring type socket joints under positive internal pressure and with angular deflection (first revision)
(Part 8/Sec 3): Resistance to internal hydrostatic pressure, Section 3 Leak-tightness of 2004
IS No. Title elastomeric sealing ring type socket joints under negative internal pressure and with angular deflection (first revision)
(Part 8/Sec 4): Resistance to internal hydrostatic pressure, Section 4 Leak-tightness of elastomeric sealing ring type socket joints under positive internal pressure without angular deflection (first revision)
(Part 9): Resistance to external blows (impact resistance) at 0°C (Round-the-clock method)
(Part 10): 2004 Determination of organotin as tin aqueous solution (first revision)
(Part 11): 2004 Resistance to dichloromethane at specified temperature (first revision)
(Part 12): 2004 Determination of titanium dioxide content
(Part 13): 2004 Determination of tensile strength and elongation
(Part 14): 2004 Determination of density/relative density (specific gravity)
(Part 15): 2004 Determination of vinyl chloride monomer content
(Part 16): 2004 High temperature test
(Part 17): 2004 Determination of ash content and sulphated ash content
(Part 18): 2004 Determination of ring stiffness
(Part 19): 2004 Flattening test
12709 : 1994 Specification for glass-fibre reinforced plastic (GRP) pipes joints and fittings for use for potable water supply (first revision)
12818 : 2010 Specification for unplasticized polyvinyl chloride(PVC-U) screen and casing pipes for bore/tubewells (second revision)
13592 : 2013 Specification for unplasticized polyvinyl chloride (PVC-U) pipes for soil and waste discharge system for inside and outside buildings including ventilation and rainwater system (first revision)
14333 : 1996 Specification for high density polyethylene pipes for sewerage
14402 : 1996 Specification for GRP pipes, joints and fittings for use for sewerage, industrial waste and water (other than potable)
| IS No. | Title | IS No. | Title | |
| 14735 : 1999 | Specification for unplasticized polyvinyl chloride (UPVC) injection moulded fittings for soil and waste discharge system for inside and outside buildings including ventilation and rain water system | 5504 : 1997 | Specification for spiral welded pipes (first revision) | |
| 6286 : 1979 | Seamless and welded steel pipe for sub-zero temperature service | |||
| 6392 : 1971 | Steel pipe flanges | |||
| 14885 : 2001 | Specification for polyethylene pipe for supply of gaseous fuel | vii) Stoneware Pipes and Fittings | ||
| IS No. | Title | |||
| 15328 : 2003 | Specification for unplasticized non-pressure polyvinyl chloride (PVC-U) pipes for use in underground drainage and sewerage system | 651 : 2007 | Specification for glazed stoneware pipes and fittings (sixth revision) | |
| 3006 : 1979 | Specification for chemically resistant glazed stoneware pipes and fittings (first revision) | |||
| 15450 : 2004 | Specification for polyethylene/ aluminium/polyethylene composite pressure pipes for hot and cold water supplies | viii) Asbestos Cement Pipes | ||
| [See 8 (a) (ii) under the category ‘Composite Matrix Products’] | ||||
| 15778 : 2007 | Specification for chlorinated polyvinyl chloride (CPVC) pipes for potable hot and cold water distribution supplies | ix) Concrete Pipes and Pipes lined/coated with Concrete or Mortar | ||
| 15801 : 2008 | Specification for polypropylene-random copolymer pipes for hot and cold water supplies | [See 8 (a) (iv) under the category ‘Composite Matrix Products’] | ||
| 15927 | Specification for polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels | c) Kitchen and Sanitary Appliances | ||
| IS No. | Title | |||
| (Part 1) : 2012 | Fittings for sockets using heated tools | 771 | Specification for glazed fire clay sanitary appliances | |
| (Part 2) : 2012 | Spigot fittings for butt fusion jointing or socket fusion using heated tools, spigot fittings for use with electro-fusion fittings | (Part 1) : 1979 | General requirements (second revision) | |
| (Part 2) : 1985 | Specific requirements of kitchen and laboratory sinks (third revision) | |||
| (Part 3) : 2011 | Electro-fusion fittings | (Part 3/Sec 1) : | Specific requirements of urinals, Section 1 Slab urinals (second revision) | |
| 16098 | Specification for structured - wall plastics piping systems for non-pressure drainage and sewerage | 1979 | (Part 3/Sec 2) : Specific requirements of urinals, Section 2 Stall urinals (third revision) | |
| 1985 | (Part 4) : 1979 | Specific requirements of post mortom slabs (second revision) | ||
| (Part 1) : 2013 | Pipes and fittings with smooth external surface, Type A | (Part 5) : 1979 | Specific requirements of shower trays (second revision) | |
| (Part 2) : 2013 | Pipes and fittings with non-smooth external surface, Type B | (Part 6) : 1979 | Specific requirements of bed-pan sinks (second revision) | |
| vi) Steel Tubes, Pipes and Fittings | ||||
| IS No. | Title | (Part 7) : 1981 | Specific requirements of slop sinks (second revision) | |
| 1239 | Specification for steel tubes, tubular and other wrought steel fittings | 772 : 1973 | Specification for general requirements of enamelled cast iron sanitary appliances (second revision) | |
| (Part 1) : 2004 | Steel tubes (sixth revision) | |||
| (Part 2) : 2011 | Steel pipe fittings (fifth revision) | 774 : 2004 | Specification for flushing cisterns for water-closets and urinals (other than plastic cisterns) (fifth revision) | |
| 3589 : 2001 | Specification for steel pipes for water and sewage (168.3 to 2 540 mm outside diameter) (third revision) | 2326 : 1987 | Specification for automatic flushing cisterns for urinals (second revision) | |
| 4270 : 2001 | Specification for steel tubes used for water wells (third revision) | |||
| IS No. | Title | d) Valves and Water Fittings (including Ferrules) | |
| IS No. | Title | ||
| 2548 | Specification for plastic seats and covers for water-closets | 778 : 1984 | Specification for copper alloy gate, globe, and check valves for water works purposes (fourth revision) |
| (Part 1) : 1996 | Thermoset seats and covers (fifth revision) | ||
| (Part 2) : 1996 | Thermoplastic seats and covers (fifth revision) | 781 : 1984 | Specification for cast copper alloy screw-down bib taps and stop valves for water services (third revision) |
| 2556 | Specification for vitreous sanitary appliances (vitreous china) | 1701 : 1960 | Specification for mixing valves for ablutionary and domestic purposes |
| (Part 1) : 1994 | General requirements (third revision) | 1703 : 2000 | Specification for water fittings — Copper alloy float valves (horizontal plunger type) (fourth revision) |
| (Part 2) : 2004 | Specific requirements of wash-down water-closets (fifth revision) | ||
| (Part 3) : 2004 | Specific requirements of squatting pans (fifth revision) | 1711 : 1984 | Specification for self-closing taps for water supply purposes (second revision) |
| (Part 4) : 2004 | Specific requirements of wash basins (fourth revision) | 1795 : 1982 | Specification for pillar taps for water supply purposes (second revision) |
| (Part 5) : 1994 | Specific requirements of laboratory sinks (third revision) | 2692 : 1989 | Specification for ferrules for water services (second revision) |
| (Part 6) : 1995 | Specific requirements of urinals and partition plates (fourth revision) | 3004 : 1979 | Specification for plug cocks for water supply purposes (first revision) |
| (Part 7) : 1995 | Specific requirements of accessories for sanitary appliances (third revision) | 3042 : 1965 | Specification for single faced sluice gates (200 to 1 200 mm size) |
| (Part 8) : 2004 | Specific requirements of pedestal close coupled wash-down and syphonic water closets (fifth revision) | 3950 : 1979 | Specification for surface boxes for sluice valves (first revision) |
| (Part 9) : 2004 | Specific requirements of pedestal type bidets (fifth revision) | 4038 : 1986 | Specification for foot valves for water works purposes (second revision) |
| (Part 14) : 1995 | Specific requirements of integrated squatting pans (first revision) | 4346 : 1982 | Specification for washers for use with fittings for water services (first revision) |
| (Part 15) : 2004 | Specific requirements of universal water closets (second revision) | 5312 | Specification for swing check type reflux (non-return) valves |
| (Part 16) : 2002 | Specific requirements for wash down wall mounted water closets | (Part 1) :2004 | Single door pattern (second revision) |
| (Part 2) :2013 | Multi-door pattern (first revision) | ||
| (Part 17) : 2001 | Specific requirements for wall mounted bidets | 8931 : 1993 | Specification for cast copper alloy fancy single tap combination tap and stop valves for water services (first revision) |
| 6411 : 1985 | Specification for gel-coated glass fibre reinforced polyester resin bath tubs (first revision) | 9338 : 2013 | Specification for cast iron/S.G. iron, cast steel screw-down stop valves for water works purposes (second revision) |
| 7231 : 1994 | Specification for plastic flushing cisterns for water-closets and urinals (second revision) | 9739 : 1981 | Specification for pressure reducing valves for domestic water supply systems |
| 11246 : 1992 | Specification for glass fibre reinforced polyester resins (GRP) squatting pans (first revision) | 9758 : 1981 | Specification for flush valves and fittings for water-closets and urinals |
| 13983 : 1994 | Specification for stainless steel sinks for domestic purposes | 9762 : 1994 | Specification for polyethylene floats (spherical) for float valves (first revision) |
IS No. Title
9763 : 2000 Specification for plastic bib taps, pillar taps, angle valves, hot and cold water services (second revision)
12234 : 1988 Specification for plastic equilibrium float valve for cold water services
13049 : 1991 Specification for diaphragm type (plastic body) float operated valves for cold water services
13114 : 1991 Specification for forged brass gate, globe and check valves for water works purposes
13349 : 1992 Specification for single faced cast iron thimble mounted sluice gates
14845 : 2000 Specification for resilient seated cast iron air relief valves for water works purposes
14846 : 2000 Specification for sluice valves for water works purposes (50-1 200 mm)
7226 : 1974 Specification for cold rolled medium, high carbon and low alloy steel strip for general engineering purposes
14246 : 2013 Specification for continuously pre-painted galvanized steel sheets and coils (first revision)
15961 : 2012 Hot-dip
15965 : 2012 Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (plain)
12313: 1988 Specification for hot-dip terne coated carbon steel sheets
d) Bars, Rods, Wire and Wire Rods IS No. Title
280 : 2006 Specification for mild steel wire for general engineering purposes (fourth revision)
1148 : 2009 Steel rivet bars (medium and high tensile) for structural purposes (fourth revision)
1673 : 1984 Specification for mild steel wire cold heading quality (second revision)
1812 : 1982 Specification for carbon steel wire for the manufacture of wood screw (second revision)
1835 : 1976 Specification for round steel wire for ropes (third revision)
1875 : 1992 Carbon steel billets, blooms, slabs and bars for forgings (fifth revision)
1921 : 2005 Specification for resin cored solder wire (second revision)
2591 : 1982 Dimensions for hot rolled bars for threaded components (second revision)
3150 : 1982 Specification for hexagonal wire netting for general purposes
4826 : 1979 Specification for hot-dipped galvanized coatings on round steel wires (first revision)
6527 : 1995 Stainless steel wire rod (first revision)
6528 : 1995 Specification for stainless steel wire (first revision)
6603 : 2001 Specification for stainless steel bars and flats (first revision)
7887 : 1992 Specification for mild steel wire rods for general engineering purposes (first revision)
IS No. Title
7904 : 1995 Specification for high-carbon steel wire rods (first revision)
10631 : 1983 Stainless steel for welding electrode core wire
IS/ISO 16124 : Steel wire rod — Dimensions and tolerances 2004
e) Plates and Studs IS No.
1862 : 1975 Specification for studs (second revision)
3502 : 2009 Specification for steel chequered plates (third revision)
f) Tubes and Tubulars IS No. Title
1161 : 2014 Specification for steel tubes for structural purposes (fifth revision)
4923 : 1997 Specification for hollow mild steel sections for structural use (second revision)
g) Slotted Sections IS No.
8081 : 1976 Specification for slotted sections
IS No. Title
1121 Methods of test for determination of strength properties of natural building stones
(Part 1): 2013 Compressive strength (second revision)
(Part 2): 2013 Transverse strength (second revision)
(Part 3) : 2012 Tensile strength (second revision) (Part 4) : 2013 Shear strength (second revision)
1122 : 1974 Method of test for determination of true specific gravity of natural building stones (first revision)
1123 : 1975 Method of identification of natural building stones (first revision)
1124 : 1974 Method of test for determination of water absorption, apparent specific gravity and porosity of natural building stones (first revision)
1125 : 2013 Method of test for determination of weathering of natural building stones (second revision)
1126 : 2013 Method of test for determination of durability of natural building stones (second revision)
1127 : 1970 Recommendations for dimensions and workmanship of natural building stones for masonry work (first revision)
1128 : 1974 Specification for limestone (slab and tiles) (first revision)
1129 : 1972 Recommendation for dressing of natural building stones (first revision)
1130 : 1969 Specification for marble (blocks, slabs and tiles)
1706 : 1972 Method of determination of resistance to wear by abrasion of natural building stones (first revision)
3316 : 1974 Specification for structural granite (first revision)
3620 : 1979 Specification for laterite stone block for masonry (first revision)
3622 : 1977 Specification for sand stone (slabs and tiles) (first revision)
4121 : 1967 Method of test for determination of water transmission rate by capillary action through natural building stones
4122 : 1967 Method of test for surface softening of natural building stones by exposure to acidic atmospheres
4348 : 1973 Methods of test for determination of permeability of natural building stones (first revision)
5218 : 1969 Method of test for toughness of natural building stones
5640 : 1970 Method of test for determining the aggregate impact value of soft coarse aggregates
6241 : 1971 Method of test for determination of stripping value of road aggregates
6250 : 1981 Specification for roofing slate tiles (first revision)
6579 : 1981 Specification for coarse aggregate for water bound macadam (first revision)
7779 Schedule for properties and availability of stones for construction purposes
(Part 1/ Sec 1): Gujarat state, Section 1 Availability 1975 of stones
(Part 1/ Sec 2): Gujarat state, Section 2 Engineering 1975 properties of building stones
(Part 1/Sec 3): Gujarat state, Section 3 Engineering properties of stone aggregates 1975
IS No. Title
(Part 2/ Sec 1): Maharashtra state, Section 1 1979 Availability of stones
(Part 2/ Sec 2): Maharashtra state, Section 2 1979 Engineering properties of building stones
(Part 2/ Sec 3): Maharashtra state, Section 3 1979 Engineering properties of stone aggregates
(Part 3/ Sec 2): Tamil Nadu state, Section 2 1990 Engineering properties of building stones
(Part 3/ Sec 3): Tamil Nadu state, Section 3 1980 Engineering properties of stone aggregates
(Part 4/Sec 1 to Karnataka state, Sections (1 to 3) 3): 1996
(Part 5/ Sec 1): Andhra Pradesh, Section 1 1997 Availability of stones
(Part 5/ Sec 2): Andhra Pradesh, Section 2 1997 Engineering properties of building stones
(Part 5/ Sec 3): Andhra Pradesh, Section 3 1997 Engineering properties of stone aggregates
9394 : 1979 Specification for stone lintels
14223 (Part 1): Specification for polished building 1994 stones: Part 1 Granite
| IS/ISO 16160 : 2012 |
| Continuously hot rolled steel sheet products — Dimensional and shape tolerances (first revision) |
| 1852 : 1985 | Rolling and cutting tolerances for hot rolled steel products (fourth revision) | IS/ISO 16162 : 2012 | Continuously cold-rolled steel sheet products — Dimensional and shape tolerances (first revision) |
| 2525 : 1982 | Dimensions for wrought aluminium and aluminium alloy wire (first revision) | IS/ISO 16163 : 2012 | Continuously hot dipped coated steel products — Dimensional and shape tolerances (first revision) |
| 2591 : 1982 | Dimensions for hot rolled steel bars for threaded components (second revision) | 24. THERMAL INSULATION MATERIALS | |
| IS No. | Title |
| 2673 : 2002 | Dimensions for wrought aluminium and aluminium alloys, extruded round tube (second revision) | 3144 : 1992 | Methods of test for mineral wool thermal insulation material (second revision) |
| 2676 : 1981 | Dimensions for wrought aluminium and aluminium alloys, sheet and strip (first revision) | 3346 : 1980 | Methods for the determination of thermal conductivity of thermal insulation materials (two slab, guarded hot-plate method (first revision) |
| 2677 : 1979 | Dimensions for wrought aluminium and aluminium alloys, plates and hot rolled sheets (first revision) | 3677 : 1985 | Specification for unbonded rock and slag wool for thermal insulation (second revision) |
| 2678 : 1987 | Dimensions and tolerances for wrought aluminium and aluminium alloy, drawn round tubes (second revision) | 4671 : 1984 | Specification for expanded polystyrene for thermal insulation purposes (first revision) |
| 3577 : 1992 | Dimensions and tolerances for wrought aluminium and aluminium alloys rivet, bolt and screw stock (first revision) | 5688 : 1982 | Methods of test for preformed block-type and pipe-covering type thermal insulation (first revision) |
| 3954 : 1991 | Hot rolled steel channel sections for general engineering purposes—Dimensions (first revision) | 5724 : 1970 | Methods of test for thermal insulating cement |
| 3965 : 1981 | Dimensions for wrought aluminium | 6598 : 1972 | Specification for cellular concrete for thermal insulation |
| IS No. | Title | IS No. | Title |
| 7509 : 1993 | Specification for thermal insulating cement (first revision) | (Part 13) : 1992 | Determination of flammability by oxygen index |
| 8154 : 1993 | Specification for preformed calcium silicate insulation for temperature up to 650°C (first revision) | 11307 : 1985 | Specification for cellular glass block and pipe thermal insulating |
| 8183 : 1993 | Specification for bonded mineral wool (first revision) | 11308 : 1985 | Specification for thermal insulating castables (hydraulic setting) for temperatures up to 1 250°C |
| 9403 : 1980 | Method of test for thermal conductance and transmittance of built up sections by means of guarded hot box | 12436 : 1988 | Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation |
| 9489 : 1980 | Method of test for thermal conductivity of materials by means of heat flow meter | 13204 : 1991 | Specification for rigid phenolic foams for thermal insulation |
| 9490 : 1980 | Method of determination for thermal conductivity of insulation materials (water calorimeter method) | 13286 : 1992 | Methods of test for surface spread of flame for thermal insulation materials |
| 14656 : 1999 | Ceramic fibre products — Methods of test | ||
| 9742 : 1993 | Specification for sprayed mineral wool thermal insulation (first revision) | 25. THREADED FASTENERS, RIVETS AND NAILS | |
| 9743 : 1990 | Specification for thermal insulation finishing cements (first revision) | IS No. | Title |
| 207 : 1964 | Specification for gate and shutter hooks and eyes (revised) | ||
| 9842 : 1994 | Specification for preformed fibrous pipe insulation (first revision) | 451 : 1999 | Specification for technical supply conditions for wood screws (third revision) |
| 11128 : 1994 | Specification for spray applied hydrated calcium silicate thermal insulation | 554 : 1999 | Specification for pipe threads where pressure-tide joints are made on the threads — Dimensions, tolerances and designation (fourth revision) |
| 11129 : 1984 | Method of test for tumbling friability of preformed block-type thermal insulation | 723 : 1972 | Specification for steel countersunk head wire nails (second revision) |
| 11239 | Method of test for rigid cellular thermal insulation materials | 724 : 1964 | Specification for mild steel and brass cup, ruler and square hooks and screw eyes (revised) |
| (Part 1) : 2009 | Dimensions (first revision) | ||
| (Part 2) : 2009 | Apparent density (first revision) | ||
| (Part 3) : 2009 | Dimensional stability (first revision) | 725 : 1961 | Specification for copper wire nails (revised) |
| (Part 4) : 1985 | Water vapour transmission rate (first revision) | 730 : 1978 | Specification for hook bolts for corrugated sheet roofing (second revision) |
| (Part 5) : 2009 | Volume percent of open and closed cells (first revision) | ||
| (Part 6) : 1985 | Heat distortion temperature | 1120 : 1975 | Specification for coach screws (first revision) |
| (Part 7) : 1985 | Coefficient of linear thermal expansion at low temperatures | 1363 | Specification for hexagon head bolts, screws and nuts of product grade C |
| (Part 8) : 1985 | Flame height, time of burning and loss of mass | (Part 1) : 2002 | Hexagon head bolts (Size range M5 to M64) (fourth revision) |
| (Part 9) : 1988 | Water absorption | (Part 2) : 2002 | Hexagon head screws (Size range M5 to M64) (fourth revision) |
| (Part 10) : 1985 | Flexural strength | ||
| (Part 11) : 1985 | Compressive strength | (Part 3) : 2002 | Hexagon nuts (Size range M5 to M64) (fourth revision) |
| (Part 12) : 1988 | Horizontal burning characteristics | 1364 | Specification for hexagon head bolts, |
IS No. Title
IS No. Title
screws and nuts of product Grades A and B
(Part 1): 2002 Hexagon head bolts (Size range M1.6 to M64) (fourth revision)
(Part 2): 2002 Hexagon head screws (Size range M1.6 to M64) (fourth revision)
(Part 3): 2002 Hexagon nuts (Size range M1.6 to M64) (fourth revision)
(Part 4): 2003 Hexagon thin nuts (chamfered) (Size range M1.6 to M64) (fourth revision)
(Part 5): 2002 Hexagon thin nuts (unchamfered) (Size range M1.6 to M10) (fourth revision)
(Part 6): 2002 Hexagon nuts, style 2
1365 : 2005 Slotted countersunk flat head screws (Common head style) — Product Grade A (fourth revision)
1366 : 2002 Specification for slotted cheese head screws (third revision) 1367 Specification for technical supply conditions for threaded steel fasteners
(Part 1): 2014 Introduction and general information (fourth revision)
(Part 2): 2002 Product grades and tolerances (third revision)
(Part 3): 2002 Mechanical properties and test methods for bolts, screws and studs with full loadability (fourth revision)
(Part 5): 2002 Mechanical properties and test methods for set screws and similar threaded fasteners not under tensile stresses (third revision)
(Part 6): 1994 Mechanical properties and test methods for nuts with specified proof loads (third revision)
(Part 7): 1980 Mechanical properties and test methods for nuts without specified proof loads (second revision)
(Part 8): 2014 Mechanical and performance properties for prevailing torque type steel hexagon nuts (fourth revision)
(Part 9/Sec 1): Surface discontinuities, Section 1 1993 Bolts, screws and studs for general applications (third revision)
(Part 9/Sec 2): Surface discontinuities, Section 2 1993 Bolts, screws and studs for special applications (third revision)
(Part 10) : 2002 Surface discontinuities on nuts (third revision)
(Part 11): 2002 Electroplated coatings (third revision)
(Part 12): 1981 Phosphate coatings on threaded fasteners (second revision)
(Part 13): 1983 Hot dip galvanized coatings on threaded fasteners (second revision)
(Part 14/Sec 1): Mechanical properties of corrosion resistance stainless stainless steel fasteners, Section 1 Bolts, screws and studs (third revision)
(Part 14/Sec 2): Mechanical properties of corrosion resistance stainless stainless steel fasteners, Section 2 Nuts (third revision)
(Part 14/Sec 3): Mechanical properties of corrosion resistance stainless stainless steel fasteners, Section 3 Set screws and similar fasteners not under tensile stress (third revision)
(Part 16): 2002 Designation system and symbols (third revision)
(Part 17): 2005 Inspections, sampling and acceptance procedure (fourth revision)
(Part 18): 1996 Packaging (third revision)
(Part 19): 1996 Axial fatigue testing of bolts, screws and studs
(Part 20): 1996 Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10 mm
1929 : 1982 Specification for hot forged steel rivets for hot closing (12 to 36 mm diameter) (first revision)
2016 : 1967 Specification for plain washers (first revision)
2155 : 1982 Specification for cold forged solid steel rivets for hot closing (6 to 16 mm diameter) (first revision)
2269 : 2006 Hexagon socket head cap screws (fifth revision)
2585 : 2006 Specification for square head bolts, screws and square nuts of product grade C (second revision)
2609 : 1972 Specification for coach bolts (first revision)
2643 : 2005 Pipe threads where pressure-tight joints are not made on the threads — Dimensions, tolerances and designation (third revision)
2687 : 1991 Specification for cap nuts (second revision)
| IS No. | Title | IS No. | Title |
| 2769 : 1969 | Sizes for squares and square holes for general engineering purposes (first revision) | 6649 : 1985 | Specification for hardened and tempered washers for high strength structural bolts and nuts (first revision) |
| 2907 : 1998 | Specification for non-ferrous rivets (first revision) | 6733 : 1972 | Specification for wall and roofing nails |
| 2998 : 1982 | Specification for cold forged steel rivets for cold closing (1 to 16 mm diameter) (first revision) | 6736 : 1972 | Specification for slotted raised countersunk head wood screws |
| 3063 : 1994 | Specification for fasteners single coil rectangular section spring lock washers (second revision) | 6739 : 1972 | Specification for slotted round head wood screws |
| 3121 : 1981 | Specification for rigging screws and stretching screws (first revision) | 6760 : 1972 | Specification for slotted countersunk head wood screws |
| 3468 : 1991 | Specification for pipe nuts (second revision) | 8033 : 1976 | Specification for washers with square hole for wood fastenings |
| 3640 : 1982 | Specification for hexagon fit bolts (first revision) | 8412 : 1977 | Specification for slotted countersunk head bolts for steel structures |
| 3757 : 1985 | Specification for high strength structural bolts (second revision) | 8822 : 1978 | Specification for slotted mushroom head roofing bolts |
| 4206 : 1987 | Dimensions for nominal lengths, and thread lengths for bolts, screws and studs (first revision) | 8869 : 1978 | Specification for washers for corrugated sheet roofing |
| 4762 : 2002 | Specification for worm drive hose clips for general purposes (second revision) | 8911 : 2005 | Countersunk slotted raised head screws (common head style) — Product Grade A (first revision) |
| 5369 : 1975 | General requirements for plain washers and lock washers (first revision) | 10102 : 1982 | Specification for technical supply conditions for rivets |
| 5370 : 1969 | Specification for plain washers with outside diameter 3 × inside diameter | 10238 : 2001 | Specification for step bolts for steel structures |
| 5372 : 1975 | Specification for taper washer for channels (ISMC) (first revision) | 12427 : 2001 | Specification for threaded steel fasteners — hexagon head transmission tower bolts (first revision) |
| 5373 : 1969 | Specification for square washers for wood fastenings | 26. TIMBER, BAMBOO AND OTHER LIGNOCELLULOSIC BUILDING MATERIALS | |
| 5374 : 1975 | Specification for taper washers for l-beam (ISMB) (first revision) | a) Timber and Bamboo | |
| 5624 : 1993 | Specification for foundation bolts (first revision) | i) Timber Classification | |
| 6113 : 1970 | Specification for aluminium fasteners for building purposes | 287 : 1993 | Permissible moisture content for timber used for different purposes—Recommendations (third revision) |
| 6610 : 1972 | Specification for heavy washers for steel structures | 399 : 1963 | Classification of commercial timbers and their zonal distribution (revised) |
| 6623 : 2004 | Specification for high strength structural nuts (second revision) | 1150 : 2000 | Trade names and abbreviated symbols for timber species (third revision) |
| 6639 : 2005 | Specification for hexagon head bolts for general steel structures (first revision) | 4970 : 1973 | Key for identification of commercial timber (first revision) |
ii) Timber Conversion and Grading IS No. Title
190 : 1991 Specification for coniferous sawn timber (baulks and scantlings) (fourth revision)
1326 : 1992 Specification for non-coniferous sawn timber (baulks and scantlings) (second revision)
1331 : 1971 Specification for cut sizes of timber (second revision)
2377 : 1967 Tables for volumes of cut sizes of timber (first revision)
3337 : 1978 Specification for ballies for general purposes (first revision)
3386 : 1979 Specification for wooden fence posts (first revision)
5966 : 1993 Specification for non-coniferous timber in converted form for general purpose (first revision)
14960 : 2001 Specification for preservative treated and seasoned sawn timber from rubberwood (Hevea brasiliensis)
iii) Timber Testing IS No. Title
1708 Methods of testing small clear specimens of timber
(Part 1): 1986 Determination of moisture content (second revision)
(Part 2): 1986 Determination of specific gravity (second revision)
(Part 3): 1986 Determination of volumetric shrinkage (second revision)
(Part 4): 1986 Determination of radial and tangential shrinkage and fibre saturation point (second revision)
(Part 5): 1986 Determination of static bending strength (second revision)
(Part 6): 1986 Determination of static bending strength under two point loading (second revision)
(Part 7): 1986 Determination of impact bending strength (second revision)
(Part 8): 1986 Determination of compressive strength parallel to grain (second revision)
(Part 9): 1986 Determination of compressive strength perpendicular to grain (second revision)
(Part 10): 1986 Determination of hardness under static indentation (second revision)
IS No. Title
(Part 11): 1986 Determination of shear strength parallel to grain (second revision)
(Part 12): 1986 Determination of tensile strength parallel to grain (second revision)
(Part 13): 1986 Determination of tensile strength perpendicular to grain (second revision)
(Part 14): 1986 Determination of cleavage strength parallel to grain (second revision)
(Part 15): 1986 Determination of nail and screw holding power (second revision)
(Part 16): 1986 Determination of brittleness by izod impact (second revision)
(Part 17): 1986 Determination of brittleness by Charpy impact (second revision)
(Part 18): 1986 Determination of torsional strength (second revision)
2408 : 1963 Methods of static tests of timbers in structural sizes
2455 : 1990 Method of sampling of model trees and logs for timber testing and their conversion (second revision)
2753 Methods for estimation of preservatives in treated timber and treating solutions
(Part 1): 1991 Determination of copper, arsenic, chromium, zinc, boron, creosote and fuel oil (first revision)
(Part 2): 2014 Determination of copper in copper organic preservative salt (second revision)
4907 : 2004 Method of testing timber connectors (first revision)
8292 : 1992 Methods for evaluation of working quality of timber under different wood operations — Method of test (first revision)
8720 : 1978 Methods of sampling of timber scantlings from depots and their conversion for testing
8745 : 1994 Methods of presentation of data of physical and mechanical properties of timber (first revision)
10420 : 1982 Method of determination of sound absorption coefficient of timber by standing wave method
10754 : 1983 Method of determination of thermal conductivity of timber
11215 : 1991 Methods for determination of moisture content of timber and timber products (first revision)
IS No. Title
13621 : 1993 Method of test for determination of dielectric constant of wood under microwave frequencies
iv) Structural Timber and Tests IS No. Title
3629 : 1986 Specification for structural timber in building (first revision)
4891 : 1988 Specification for preferred cut sizes of structural timber (first revision) 4924 Method of test for nail jointed timber trusses
(Part 1): 1968 Destructive test
(Part 2): 1968 Proof test
v) Logs IS No. Title
3364 Method of measurement and evaluation of defects in timber (Part 1): 1976 Logs (first revision)
(Part 2): 1976 Converted timber (first revision)
4895 : 1985 Specification for teak logs (first revision)
5246 : 2000 Specification for coniferous logs (first revision)
7308 : 1999 Specification for non-coniferous logs (first revision)
vi) Bamboo IS No. Title
6874 : 2008 Method of tests for bamboos (first revision)
8242 : 1976 Methods of tests for split bamboos
(b) Reconstituted Products
i) Plywood IS No. Title
303 : 1989 Specification for plywood for general purposes (third revision)
710 : 2010 Specification for marine plywood (second revision)
1328 : 1996 Specification for veneered decorative plywood (third revision) 1734 Methods of test for plywood
(Part 1): 1983 Determination of density and moisture content (second revision)
(Part 2): 1983 Determination of resistance of dry heat (second revision)
(Part 3): 1983 Determination of fire resistance (second revision)
IS No. Title
(Part 4): 1983 Determination of glue shear strength (second revision)
(Part 5): 1983 Test for adhesion of plies (second revision)
(Part 6): 1983 Determination of water resistance (second revision)
(Part 7): 1983 Mycological test (second revision)
(Part 8): 1983 Determination of pH value (second revision)
(Part 9): 1983 Determination of tensile strength (second revision)
(Part 10 : 1983 Determination of compressive strength (second revision)
(Part 11): 1983 Determination of static bending strength (second revision)
(Part 12): 1983 Determination of scarf joint strength (second revision)
(Part 13): 1983 Determination of panel shear strength (second revision)
(Part 14): 1983 Determination of plate shear strength (second revision)
(Part 15): 1983 Central loading of plate test (second revision)
(Part 16): 1983 Vibration of plywood plate test (second revision)
(Part 17): 1983 Long time loading test of plywood strips (second revision)
(Part 18): 1983 Impact resistance test on the surface of plywood (second revision)
(Part 19): 1983 Determination of nail and screw holding power (second revision)
(Part 20): 1983 Acidity and alkalinity resistance test (second revision)
4990 : 2011 Specification for plywood for concrete shuttering work (third revision)
5509 : 2000 Specification for fire retardant plywood (second revision)
5539 : 1969 Specification for preservative treated plywood
7316 : 1974 Specification for decorative plywood using plurality of veneers for decorative faces
10701 : 2012 Specification for structural plywood (first revision)
13957 : 1994 Specification for metal faced plywood
15791 : 2007 Specification for museum plywood
ii) Blockboards, Particle Boards and Fibre Boards IS No. Title
1658 : 2006 Specification for fibre hardboards (third revision)
IS No. Title
IS No. Title
1659 : 2004 Specification for block boards (fourth revision)
2380 Methods of test for wood particle boards and boards from other lignocellulosic materials
(Part 1): 1977 Preparation and conditioning of test specimens (first revision)
(Part 2): 1977 Accuracy of dimensions of boards (first revision)
(Part 3): 1977 Determination of moisture content and density (first revision)
(Part 4): 1977 Determination of static bending strength (first revision)
(Part 5): 1977 Determination of tensile strength perpendicular to surface (first revision)
(Part 6): 1977 Determination of tensile strength parallel to surface (first revision)
(Part 7): 1977 Determination of compression-perpendicular to plane of the board (first revision)
(Part 8): 1977 Compression parallel to surface test (first revision)
(Part 9): 1977 Determination of resistance to shear in plane of the board (first revision)
(Part 10): 1977 Falling hammer impact test (first revision)
(Part 11): 1977 Surface hardness (first revision)
(Part 12): 1977 Central loading of plate test (first revision)
(Part 13): 1977 Long time loading bending test (first revision)
(Part 14): 1977 Screw and nail withdrawal test (first revision)
(Part 15): 1977 Lateral nail resistance (first revision)
(Part 16): 1977 Determination of water absorption (first revision)
(Part 17): 1977 Determination of swelling in water (first revision)
(Part 18): 1977 Determination of mass and dimensional changes caused by moisture changes (first revision)
(Part 19) : 1977 Durability cyclic test for interior use (first revision)
(Part 20): 1977 Accelerated weathering cyclic test for exterior use (first revision)
(Part 21): 1977 Planeness test under uniform moisture content (first revision)
(Part 22): 1981 Determination of surface glueability test
(Part 23): 1981 Vibration test for particle boards
3087 : 2005 Specification for particle boards of wood and other lignocellulosic materials (medium density) for general purposes (second revision)
3097 : 2006 Specification for veneered particle boards (second revision)
3129 : 1985 Specification for low density particle boards (first revision)
3308 : 1981 Specification for wood wool building slabs (first revision)
3348 : 1965 Specification for fibre insulation boards
3478 : 1966 Specification for high density wood particle boards
12406 : 2003 Specification for medium density fibreboards for general purposes (first revision)
12823 : 2015 Specification for wood products — Prelaminated particle boards (first revision)
13745 : 1993 Method for determination of formaldehyde content in particle board by extraction method called perforator method
14276 : 1995 Specification for cement bonded particle boards
14587 : 1998 Specification for prelaminated medium density fibre board
15786 : 2008 Specification for prelaminated cement bonded particle boards
iii) Wood-Based Laminates and Lumber IS No. Title
3513 (Part 3): Specification for resin treated compressed wood laminates (compregs): Part 3 For general purposes (first revision) 1989
3513 (Part 4): Specification for high and medium density wood laminates (compregs): Part 4 Sampling and tests 1966
7638 : 1999 Methods of sampling for wood/ lignocellulosic based panel products (second revision)
9307 Methods of tests for wood-based structural sandwich construction
(Part 1): 1979 Flexure test
(Part 2): 1979 Edgewise compression test
(Part 3): 1979 Flatwise compression test
IS No. Title (Part 4): 1979 Shear test (Part 5): 1979 Flatwise tension test (Part 6): 1979 Flexure creep test (Part 7): 1979 Cantilever vibration test (Part 8): 1979 Weathering test 14315: 1995 Specification for commercial veneers 14616: 1999 Specification for laminated veneer lumber 16171: 2014 Specification for veneer laminated lumber
iv) Bamboo and Coir Board Products IS No. Title 13958 : 1994 Specification for bamboo mat board for general purposes 14588 : 1999 Specification for bamboo mat veneer composite for general purposes 14842 : 2000 Specification for coir veneer board for general purposes 15476 : 2004 Specification for bamboo mat corrugated sheets 15491 : 2004 Specification for medium density coir boards for general purposes 15877 : 2010 Specification for coir faced block boards 15878 : 2010 Specification for coir hardboard for general purposes 15972 : 2012 Specification for bamboo-jute corrugated and semi-corrugated sheets
848 : 2006 Specification for synthetic resin adhesives for plywood (phenolic and aminoplastic) (second revision)
851 : 1978 Specification for synthetic resin adhesives for construction work (non-structural) in wood (first revision)
852 : 1994 Specification for animal glue for general wood-working purposes (second revision)
1508 : 1972 Specification for extenders for use in synthetic resin adhesives (urea-formaldehyde) for plywood (first revision)
4835 : 1979 Specification for polyvinyl acetate dispersion-based adhesives for wood (first revision)
9188 : 1979 Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition
875 (Part 1): Code of Practice for design loads (other than earthquake) for buildings and structures: Part 1 Dead loads — Unit weights of building material and stored materials (second revision)
1322 : 1993 Specification for bitumen felts for waterproofing and damp-proofing (fourth revision)
1580 : 1991 Specification for bituminous compound for waterproofing and caulking purposes (second revision)
3037 : 1986 Specification for bitumen mastic for use in waterproofing of roofs (first revision)
3384 : 1986 Specification for bitumen primer for use in waterproofing and damp-proofing (first revision)
5871 : 1987 Specification for bitumen mastic for tanking and damp-proofing (first revision)
7193 : 2013 Specification for glass fibre base bitumen felts (second revision)
12027 : 1987 Specification for silicone-based water repellents
13435 Method of tests for acrylic based polymer waterproofing materials
(Part 1): 1992 Determination of solid content
(Part 2): 1992 Determination of coarse particle
(Part 3): 1992 Determination of capillary water take-up
(Part 2): 1993 Pliability test
(Part 3): 1993 Storage sticking test
(Part 4): 1993 Pressure head test
(Part 5): 1993 Heat resistance test
(Part 6): 1993 Water absorption test
14695 : 1999 Specification for glass fibre base coal tar pitch outer wrap
| 29. WELDING ELECTRODES AND WIRES | IS No. | Title | |
| IS No. | Title | 8363 : 1976 | Specification for bare wire electrodes for electroslag welding of steels |
| 814 : 2004 | Specification for covered electrodes for manual metal arc welding of carbon and carbon manganese steel (sixth revision) | 10631 : 1983 | Stainless steel for welding electrode core wire |
| 15977 : 2013 | Specification for classification and acceptance tests for bare solid wire electrodes and wire flux combination for submerged arc welding of structural steel | ||
| 1278 : 1972 | Specification for filler rods and wires for gas welding (second revision) | ||
| 1395 : 1982 | Specification for low and medium alloy steel covered electrodes for manual metal arc welding (third revision) | 8666 : 1977 | Specification for copper and copper alloy covered electrodes for manual metal arc welding |
| 2879 : 1998 | Mild steel for metal arc welding electrodes (third revision) | 30. WIRE ROPES AND WIRE PRODUCTS (INCLUDING WIRE FOR FENCING) | |
| 4972 : 1968 | Specification for resistance spot-welding electrodes | IS No. | Title |
| 278 : 2009 | Specification for galvanized steel barbed wire for fencing (fourth revision) | ||
| 5206 : 1983 | Covered electrodes for manual arc welding of stainless steel and other similar high alloy steels (first revision) | 2140 : 1978 | Specification for stranded galvanized steel wire for fencing (first revision) |
| 5511 : 1991 | Specification for covered electrodes for manual metal arc welding of cast iron (first revision) | 2266 : 2002 | Specification for steel wire ropes for general engineering purposes (fourth revision) |
| 5897 : 1985 | Specification for aluminium and aluminium alloy welding rods and wires and magnesium alloy welding rods (first revision) | 2365 : 1977 | Specification for steel wire suspension ropes for lifts, elevators and hoists (first revision) |
| 5898 : 1970 | Specification for copper and copper alloy bare solid welding rods and electrodes | 2721 : 2003 | Specification for galvanized steel chain link fences fabric (second revision) |
| 6594 : 2001 | Technical supply conditions for steel wire ropes and strands (second revision) | ||
| 6419 : 1996 | Specification for welding rods and bare electrodes for gas shielded arc welding of structural steel (first revision) | 16013 : 2012 | Specification for welded wire gabions (metallic-coated or metallic-coated with PVC coating) |
| 6560 : 1996 | Specification for molybdenum and chromium-molybdenum low alloy steel welding rods and bare electrodes for gas shielded arc welding (first revision) | 16014 : 2012 | Specification for mechanically woven, double-twisted, hexagonal wire mesh gabions, revet mattresses and rock fall netting (galvanized steel wire or galvanized steel wore with PVC coating) |
IS No. 3952 : 2013 Title Specification for burnt clay hollow bricks and blocks for walls and partitions (third revision)
b) Stabilized Soil Products
IS No. Title
1725 : 2013 Specification for stabilized soil blocks used in general building construction (second revision)
1077 : 1992 Specification for common burnt clay building bricks (fifth revision)
2180 : 1988 Specification for heavy duty burnt clay building bricks (third revision)
2222 : 1991 Specification for burnt clay perforated building bricks (third revision)
2691 : 1988 Specification for burnt clay facing bricks (second revision)
3495 (Parts 1 to 4): 1992 Methods of test of burnt clay building bricks (third revision) Determination of compressive strength Determination of water absorption Determination of efflorescence Determination of warpage
3583 : 1988 Specification for burnt clay paving bricks (second revision)
3952 : 2013 Specification for burnt clay hollow bricks and blocks for walls and partitions (third revision)
4885 : 1988 Specification for sewer bricks (first revision)
5454 : 1978 Methods for sampling of clay building bricks (first revision)
5779 : 1986 Specification for burnt clay soling bricks (first revision)
6165 : 1992 Dimensions for special shapes of clay bricks (first revision)
13757 : 1993 Specification for burnt clay fly ash building bricks
7556 : 1988 Specification for burnt clay jallies (first revision)
| d) Adhesives | |||
| IS No. | Title | 4139 : 1989 | Specification for calcium silicate bricks (second revision) |
| 848 : 2006 | Specification for synthetic resin adhesives for plywood (phenolic and aminoplastic) (second revision) | 6932(Part 1) : 1973 | Method of tests for building limesDetermination of insoluble residue, loss on ignition, insoluble matter, silicon dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide |
| 849 : 1994 | Specification for cold setting case in glue for wood (first revision) | ||
| 851 : 1978 | Specification for synthetic resin adhesives for construction work (non-structural) in wood (first revision) | (Part 2) : 1973 | Determination of carbon dioxide content |
| 852 : 1994 | Specification for animal glue for general wood-working purposes (second revision) | (Part 3) : 1973 | Determination of residue on slaking of quicklime |
| 1508 : 1972 | Specification for extenders for use in synthetic resin adhesives (urea-formaldehyde) for plywood (first revision) | (Part 4) : 1973 | Determination of fineness of hydrated lime |
| (Part 5) : 1973 | Determination of unhydrated oxide | ||
| (Part 6) : 1973 | Determination of volume yield of quicklime | ||
| 4835 : 1979 | Specification for polyvinyl acetate dispersion-based adhesives for wood (first revision) | (Part 7) : 1973 | Determination of compressive and transverse strength |
| 9188 : 1979 | Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition | (Part 8) : 1973 | Determination of workability |
| (Part 9) : 1973 | Determination of soundness | ||
| (Part 10) : 1973 | Determination of popping and pitting of hydrated lime | ||
| 12830 : 1989 | Rubber based adhesives for fixing PVC tiles to cement | (Part 11) : 1984 | Determination of setting time of hydrated lime |
| 12994 : 1990 | Epoxy adhesives, room temperature curing general purpose | 10360 : 1982 | Specification for lime pozzolana concrete blocks for paving |
IS No. Title
15477 : 2004 Specification for adhesives for use with ceramic tiles and mosaics
712 : 1984 Specification for building limes (third revision)
1624 : 1986 Method of field testing of building lime (second revision)
2686 : 1977 Specification for cinder as fine aggregates for use in lime concrete (first revision)
3068 : 1986 Specification for broken brick (burnt-clay) coarse aggregates for use in lime concrete (second revision)
3115 : 1992 Specification for lime based blocks (second revision)
3182 : 1986 Specification for broken bricks (burnt clay) fine aggregates for use in lime mortar (second revision)
4098 : 1983 Specification for lime-pozzolana mixture (first revision)
10772 : 1983 Specification for quick setting lime pozzolana mixture
12894 : 2002 Specification for pulverized fuel ash lime bricks (first revision)
15648 : 2006 Specification for pulverized fuel ash for lime-pozzolana mixture applications