For analysis and design of space frame along with its components, specialist literature may be referred to, and the methodology for the same may be as agreed between the parties concerned.
The following list records those standards which are acceptable as ‘good practice’ and ‘accepted standards in the fulfilment of the requirements of the Code. The latest version of a standard shall be adopted at the time of enforcement of the Code. The standards listed may be used by the Authority as a guide in conformance with the requirements of the referred clauses in the Code.
In the following list, the number appearing in the first column within parentheses indicates the number of the reference in this Part/Section.
| IS No. | Title |
|---|---|
| (1) 800 : 1984 | Code of practice for general construction in steel (second revision) |
| (2) 962 : 1989 | Code of practice for architectural and building drawings (second revision) |
| 8000 | Geometrical tolerancing on technical drawings: |
| IS No. | Title |
| (Part 1) : 1985 | Tolerances of form, orientation, location and run-out, and appropriate geometrical definitions (first revision) |
| (Part 2) : 1992 | Maximum material principles (first revision) |
| (Part 3) : 1992 | Dimensioning and tolerancing of profiles (second revision) |
| (Part 4) : 1976 | Practical examples of indications on drawings |
| IS 8976 : 1978 | Guide for preparation and arrangement of sets of drawings and parts list |
| (3) Structural Steel | |
| 1977 : 1996 | Specification for low tensile structural steels (third revision) |
| 2062 : 1999 | Specification for steel for general structural purpose (fifth revision) |
| IS No. | Title | IS No. | Title |
| 8500 : 1991 | Specification for structural steel-microalloyed (medium and high tensile qualities) (first revision) | Steel Castings | |
| 1030 : 1998 | Specification for carbon steel castings for general engineering purposes (fifth revision) | ||
| 1161 : 1998 | Specification for steel tubes for structural purposes (third revision) | 2708 : 1993 | Specification for 1.5 percent manganese steel castings for general engineering purposes (third revision) |
| Rivets | |||
| 1929 : 1982 | Specification for hot forged steel rivets for hot closing (12 to 36 mm diameter) (first revision) | Bolts and Nuts | |
| 1363 | Specification for hexagon head bolts, screws and nuts of product grade C: | ||
| 2155 : 1982 | Specification for cold forged solid steel rivets for hot closing (6 to 16 mm diameter) (first revision) | (Part 1) : 2002 | Hexagon head bolts (size range M5 to M64) (fourth revision) |
| (Part 2) : 2002 | Hexagon head screws (size range M5 to M64) (fourth revision) | ||
| 1148 : 1982 | Specification for hot-rolled rivet bars (up to 40 mm diameter) for structural purposes (third revision) | (Part 3) : 2002 | Hexagon nuts (size range M5 to M64) (fourth revision) |
| 1149 : 1982 | Specification for high tensile steel rivet bars for structural purposes (third revision) | IS 1364 | Specification for hexagon head bolts, screws and nuts of product grade A and B: |
| Welding Consumables | (Part 1) : 1992 | Hexagon head bolts (size range M1.6 to M64) (fourth revision) | |
| 1278 : 1972 | Specification for filler rods and wires for gas welding (second revision) | (Part 2) : 2002 | Hexagon head screws (size range M1.6 to M64) (fourth revision) |
| 814 : 1991 | Specification for covered electrodes for manual metal arc welding of carbon and carbon manganese steels (fifth revision) | IS 1367 | Technical supply conditions for threaded steel fasteners: |
| (Part 1) : 2002 | General requirements for bolts, screws and studs (third revision) | ||
| 1395 : 1982 | Specification for low and medium alloy steel covered electrodes for manual metal arc welding (third revision) | (Part 2) : 2002 | Tolerances for fastners — Bolts, screws, studs and nuts — Product grades A, B and C (third revision) |
| 7280 : 1974 | Specification for bare wire electrodes for submerged arc welding of structural steels | IS 3640 : 1982 | Specification for hexagon fit bolts (first revision) |
| 3613 : 1974 | Specification for acceptance tests for wire-flux combinations for submerged arc welding (first revision) | IS 3757 : 1985 | Specification for high strength structural bolts (second revision) |
| 6419 : 1996 | Specification for welding rods and bare electrodes for gas shielded arc welding of structural steel (first revision) | IS 6623 : 1985 | Specification for high strength structural nuts (first revision) |
| IS 6639 : 1972 | Specification for hexagon bolts for steel structures | ||
| 6560 : 1996 | Specification for molybdenum and chromium-molybdenum low alloy steel welding rods and bare electrodes for gas shielded arc welding (first revision) | Washers | |
| IS 5369 : 1975 | General requirements for plain washers and lock washers (first revision) | ||
| IS No. | Title | IS No. | Title |
| 5370 : 1969 | Specification for plain washers with outside diameter more than three times the diameter | 5624 : 1993 | Specification for foundation bolts (first revision) |
| 6610 : 1972 | Specification for heavy washers for steel structures | ||
| 5372 : 1975 | Specification for taper washers for channels (ISMC) (first revision) | 6649 : 1985 | Specification for hardened and tempered washers for high strength structural bolts and nuts (first revision) |
| 5374 : 1975 | Specification for taper washers for I-beams (ISMB) (first revision) | (4) 806 : 1968 | Code of use of steel tubes in general building construction |
PART 6 STRUCTURAL DESIGN
Section 7 Prefabrication, Systems Building and Mixed/Composite Construction: 7A Prefabricated Concrete
BUREAU OF INDIAN STANDARDS
- FOREWORD
- ... 3
- 1 SCOPE
- ... 5
- 2 TERMINOLOGY
- ... 5
- 3 MATERIALS, PLANS AND SPECIFICATIONS
- ... 6
- 4 MODULAR CO-ORDINATION, ARCHITECTURAL TREATMENT AND FINISHES
- ... 6
- 5 COMPONENTS
- ... 7
- 6 PREFABRICATION SYSTEMS AND STRUCTURAL SCHEMES
- ... 8
- 7 JOINTS
- ... 12
- 8 TESTS FOR COMPONENTS/STRUCTURES
- ... 13
- 9 MANUFACTURE, STORAGE, TRANSPORT AND ERECTION OF PRECAST ELEMENTS
- ... 14
- 10 EQUIPMENT
- ... 20
- 11 PREFABRICATED STRUCTURAL UNITS
- ... 21
- LIST OF STANDARDS
- ... 21
Prefabrication, though desirable for large scale building activities, has yet to take a firm hold in the country. Two aspects of prefabrication specifically to be borne in mind are the system to be adopted for the different categories of buildings and the sizes of their components. Here the principle of modular co-ordination is of value and its use is recommended.
Advantages of recent trends in prefabrication have been taken note of and also the hazards attended to such construction. A few recommendations on the need to avoid ‘progressive collapse’ of the structure have been included. This has become necessary in view of such collapses in the past. A specific point to be borne in mind, therefore, is the need to make the structure reasonably safe against such a collapse.
Prefabricated constructions being comparatively a new technique, some of the essential requirements for the manufacture of the prefabricated components and elements are also included in this Section.
Since the aim of prefabrication is to effect economy, improvement in quality and speed in construction, the selection of proper materials for prefabrication is also an important factor in the popularization of this technique. The use of locally available materials with required characteristics and those materials which, due to their innate characteristics like lightweight, easy workability, thermal insulation, non-combustibility, etc, effect economy and improved quality, may be tried. However, this Section pertains to prefabricated elements with cementatious materials.
It is possible to achieve or evolve aesthetically satisfying designs using prefabricated construction. A careful and judicious handling of materials and use of finishes on a prefabricated building can help the designer a great deal in ensuring that the appearance of the building as aesthetically appealing. The purpose of finishes and architectural treatment is not only to give prefabricated buildings an individual character but also to effect better performance and greater user satisfaction.
The design of prefabricated buildings shall include provision for all installations of services and their required piping, wiring and accessories to be installed in the building.
This Section was first published in 1970 and was subsequently revised in 1983. In the last revision the following main changes were made:
a) A brief provision regarding importance of architectural treatment and finishes as applicable to prefabricated buildings were included;
b) A brief clause was added on the requirements of materials for use in prefabrication;
c) The clause on prefabricating systems and structural elements was elaborated;
d) The clause on testing of components was revised to include testing of structure or part of structure; and
e) A brief clause on the manufacture of cellular concrete was added.
In this revision, this Section, earlier named as Prefabrication and Systems Building has been named and restructured as follows:
Section 7 Prefabrication, Systems Building and Mixed/Composite Construction
7A Prefabricated Concrete
7B Systems Building and Mixed/Composite Construction
This sub-section covers Prefabricated concrete. In this revision the following main changes have been made:
a) Modular coordination and modular dimension of the components have been revised to have more flexibility for planning.
b) The provisions on tolerance has been revised to include different types of prefabricated components.