This sub-section deals with the general structural use of prestressed concrete. It covers both work carried out on site and the manufacture of precast prestressed concrete units.
The provisions relating to design and general structural use of prestressed concrete including on:
a) materials, workmanship, inspection and testing;
b) general design requirements; and
c) structural design: limit state method,
shall be in accordance with good practices contained in IS 1343 : 1980 ‘Code of practice for prestressed concrete (first revision)’.
NOTE— At the time of publication of this sub-section, IS 1343 was under revision; and once the revised IS 1343 is published, the same shall replace the provisions given in this sub-section.
PART 6 STRUCTURAL DESIGN
Section 6 Steel
BUREAU OF INDIAN STANDARDS
This Section covers the structural design aspect of steel structures in buildings.
This Section covers the use of hot-rolled structural steel sections and steel tubes in buildings. It permits the design by working stress method and plastic theory, and now in this revision by limit state method. Further, reference to space frame has now found place in this Section.
This Section is based on IS 800 : 1984 ‘Code of practice for general construction in steel (second revision)’ and IS 806 : 1968 ‘Code of practice for use of steel tubes in general building construction (first revision)’, and also enables design using limit state method.
More rigorous analytical procedures than envisaged as per this Section are available and can be made use of for finding effective lengths of compression members in determining elastic critical loads.
The Indian Standard IS 800, on which this Section is largely based is under revision at the time of publication of this Code. Major changes have been envisaged in the revision of IS 800 including introduction of limit state method. In the absence of availability of finalized version of revised IS 800 at the time of revision of this Section, in this revision, the provisions of design as per existing IS 800 : 1984 have been continued through appropriate reference to the same; similarly reference has been made to IS 806. At the same time, the limit state method having already gained acceptance has been taken into account in this revision by providing suitable enabling provisions and also covering certain general principles thereof.
All standards, whether given herein above or cross-referred to in the main text of this Section, are subject to revision. The parties to agreement based on this Section are encouraged to investigate the possibility of applying the most recent editions of the standards.