7.3.1 Mortars, such as those given in Table 13 or of equivalent specification, shall preferably be used for masonry construction for various categories of buildings.
| Category of Proportion of Cemet-Lime-Sand<sup>2</sup>) Construction<sup>1</sup>)(1) (2) |
|---|
| A M2 (Cement-sand 1:6) or M3 (Lime-cinder <sup>3</sup>) 1:3) or richer B, C M2 (Cement-lime-sand 1:2:9 or Cement-sand 1:6) or richer D, E H2 (Cement-sand 1:4) or M1 (Cement-lime-sand 1:1:6) or richer NOTE - Though the equivalent mortar with lime will have less strength at 28 days, their strength after one year will be comparable to that of cement mortar. <sup>1</sup>) Category of construction is defined in Table 12. <sup>2</sup>) Mortar grades and specification for types of limes etc, shall be in accordance with Table 1. <sup>3</sup>) In this case some other pozzolanic material like SURKHI (burnt brick fine powder) may be used in place of cinder. |
7.3.2 Where steel reinforcing bars are provided in masonry the bars shall be embedded with adequate cover in cement sand mortar not leaner than 1:3 (minimum clear cover 10 mm) or in cement concrete of grade M15 (minimum clear cover 15 mm or bar diameter whichever more), so as to achieve good bond and corrosion resistance.