2.0 For the purpose of this Section, the following definitions shall apply.
2.1 Anatomical Purpose Definitions
2.1.1 Bamboo — Tall perennial grasses found in tropical and sub-tropical regions. They belong to the family Poaceae and sub-family Bambusoidae.
2.1.2 Bamboo Culm — A single shoot of bamboo usually hollow except at nodes which are often swollen.
2.1.3 Bamboo Clump — A cluster of bamboo culms emanating from two or more rhizomer in the same place.
2.1.4 Cellulose — A carbohydrate, forming the fundamental material of all plants and a main source of the mechanical properties of biological materials.
2.1.5 Cell — A fundamental structural unit of plant and animal life, consisting of cytoplasma and usually enclosing a central nucleus and being surrounded by a membrane (animal) or a rigid cell wall (plant).
2.1.6 Cross Wall — A wall at the node closing the whole inside circumference and completely separating the hollow cavity below from that above.
2.1.7 Hemi Cellulose — The polysaccharides consisting of only 150 to 200 sugar molecules, also much less than the 10 000 of cellulose.
2.1.8 Lignin — A polymer of phenyl propane units, in its simple form (C₆H₅CH₃CH₂CH₃)
2.1.9 Sliver — Thin strips of bamboo processed from bamboo culm.
2.1.10 Tissue — Group of cells, which in higher plants consist of (a) Parenchyma — a soft cell of higher plants
as found in stem pith or fruit pulp, (b) Epidermis — the outermost layer of cells covering the surface of a plant, when there are several layers of tissue.
2.2 Structural Purpose Definitions
2.2.1 Bamboo Mat Board — A board made of two or more bamboo mats bonded with an adhesive.
2.2.2 Beam — A structural member which supports load primarily by its internal resistance to bending.
2.2.3 Breaking Strength — A term loosely applied to a given structural member with respect to the ultimate load it can sustain under a given set of conditions.
2.2.4 Bundle-Column — A column consisting of three or more number of culm bound as integrated unit with wire or strap type of fastenings.
2.2.5 Centre Internode — A test specimen having its centre between two nodes.
2.2.6 Characteristic Load — The value of loads which has a 95 percent probability of not exceeding during the life of the structure.
2.2.7 Characteristic Strength — The strength of the material below which not more than 5 percent of the test results are expected to fall.