All developments shall conform to the Plastic Waste (Management and Handling) (Amendment) Rules, 2011 by the Ministry of Environment and Forests, Government of India vide number S.O. 782(E), dated the 21st April, 2011 in the Gazette of India and all subsequent revisions thereof.
The requirements of the aforementioned notification are given below for reference.
1) Application
The provisions of regulations 4 and 7 shall not apply to the manufacture of carry bags exclusively for export purposes, against an order for export, received by the owner or occupier of the concerned manufacturing unit. This exemption does not apply to any surplus or rejects, left over and the like.
- Definitions: - In these rules, unless the context otherwise requires:-
a) “Act” means the Environment (Protection) Act, 1986 (29 of 1986);
b) “Carry Bags" mean bags made from any plastic material, used for the purpose of carrying or dispensing commodities but do not include bags that constitute or form an integral part of the packaging in which goods are sealed prior to use;
c) “Commodities” mean articles; including but not limited to vegetables, fruits, pharmaceuticals, food grains and the like;
d) “Compostable plastics” mean plastic that undergoes degradation by biological processes during composting to yield CO2, water, inorganic compounds and biomass at a rate consistent with other known compostable materials and does not leave visible, distinguishable or toxic residue;
e) “Consent” means the consent to establish and operate from the concerned State Pollution Control Board or Pollution Control Committee granted under the Water (Prevention and Control of Pollution) Act, 1974 (6 of 1974), and the Air (Prevention and Control of Pollution) Act, 1981 (14 of 1981);
f) “Disintegration” means the physical breakdown of a material into very small fragments;
g) “Extended producer's responsibility (EPR)” means the responsibility of a manufacturer of plastic carry bags, and multilayered plastic pouches and sachets and the brand owners using such carry bags and multilayered plastic pouches and sachets for the environmentally sound management of the product until the end of its life;
h) “Food-stuffs” mean ready to eat food products, fast food, processed or cooked food in liquid, powder, solid or semi-solid form;
i) “Manufacturer” means any person who manufactures plastic carry bags or multilayered plastic pouches or sachets or like;
j) “Municipal authority” means municipal corporation, municipality, magar palika, nagar nigam, nagar panchayat, municipal council including notified area committee (NAC) or any other local body constituted under the relevant statutes and, where the management and handling of municipal solid waste is entrusted to such agency;
k) “Multilayered plastics” means a pouch or sachet having at least one layer of plastic in combination with one or more layers of packaging material such as paper, paper board, metalised layers or aluminum foil, either in the form of a laminate or co-extruded structure;
l) “Plastic” means material which contains as an essential ingredient a high polymer and which at some stage in its processing into finished products can be shaped by flow;
m) “Plastic waste” means any plastic product such as carry bags, pouches or multilayered plastic pouch or sachet etc, which have been discarded after use or after their intended life is over;
n) “Registration” means registration with the State Pollution Control Board or Pollution Control Committee concerned, as the case may be, of units manufacturing plastic carry bags, multilayered plastic pouch or sachet or recycling of plastic waste;
o) “Virgin plastic” means plastic material which has not been subjected to use earlier and has also not been blended with scrap or waste;
p) “Waste management” means the scientific reduction, re-use, recovery, recycling, composting or disposal of plastic waste;
q) “Waste pickers” mean individuals or groups of individuals engaged in the collection of plastic waste.
3) Prescribed Authority
The prescribed Authority means the Authority-
a) For enforcement of the provisions of these rules related to registration manufactures and recycling shall be the Maharashtra Pollution Control Board.
b) For enforcement of the provisions of these rules relating to the use, collection, segregation, transportation and disposal of plastic waste, the prescribed authority shall be the NIT/ SPA.
