Application for the Technical Clearance to be made to Notary Architect/Engineer ²⁶⁶[for buildings and/or compound wall in plot area upto 500 sq. mts. and height of building limited to G+2 storeys including stilt floor in plots formed by way of finally approved subdivision layout plan approved earlier by competent authorities in both Planning and Development Authority areas/Non Planning and Development Authority areas in the State of Goa]
Date: ____
From:- ____
(Name and address of Owner)
²⁶⁵ Inserted vide notification No. 21/1/TCP/2011/Part file/3252 dated 1-8-2011.
²⁶⁶ Substituted vide Amendment Regulation, 2022.
173-
To,
The Notary *Architect/Engineer,
____,
____, Goa.
Sir,
I/We intend to carry out the under mentioned development in the site or plot of land bearing Chalta No._ of P.T. Sheet No._/Survey No._/Sub-divided Plot No._ of _ City/Village on _ road, in _ ward.
Particulars of proposed development:- ____ I/We forward herewith the following:- * Strike out which is not applicable.
1. Drawings:
(a) Site Plan 5 copies ( )
(b) Detailed Plans, Elevations and Sections 5 sets ( )
(c) Location Plan 5 copies ( )
(d) *Parking Layout Plan 5 copies ( )
(e) *Contour Plans in case of sloping sites 3 copies ( )
2. Documents duly authenticated/signed as prescribed:
(a) Questionnaire 3 copies ( )
(b) *Survey Plan 1 copy ( )
(c) Copy of Index of Land (Form-III/I & XIV/Form-B/D) 1 copy ()
(d) Document showing ownership of land 1 copy ( )
(e) Certificate from the Architect/Engineer who has planned the project and has signed the drawings 1 copy ( )
(f) Structural Liability Certificate from the Engineer responsible for the Structural Design of the Project 1 copy ( )
(g) Affidavit from the Owner 1 copy ( )
(h) *Power of Attorney (if applicable) 1 copy ()
(i) Conversion Sanad/Application for recommendation for conversion 1 copy ( )
(j) *NOC from other agencies, if applicable:-
(i) ____
(ii) ____
(iii) ____ 1 copy ( )
I/We request that the proposed development may be approved and that the Technical Clearance may be issued.
Yours faithfully,
Name & Signature of Owner
Signature of the Architect/Engineer (Seal with Name, Address, Reg. No.)
174-