All fees and charges to be decided by Sanctioning Authority as notified from time to time
- Fees and Charges (Please refer clause 2.2 of this document).
a. Building Permit Fee: No building application shall be deemed valid unless and until the owner giving notice has paid the building plan fees on building application as per schedule given below:
i. Building Permit fee for Sanction/Revised Sanction/Completion/ Regulerisation all buildings shall be calculated at the rate of Rs.10/- per sq.m of Built Up Area (including basement floor, stilt floor). In case of Storage building/ Warehouses/ Godowns the fee shall be calculated at the rate of Rs.2/- per sq.m of Built Up Area (including basement floor, stilt floor).
ii. Fee for additional/alteration/ revalidation shall be same as (i) above.
iii. Revalidation of plans: - Fee shall be same as (i) above.
iv. Fee for layout/land sub-division/approval shall be calculated
@ Rs.10, 000/- per acre and same for the part thereof.
(@ Rs. 1,000/-In case of Storage building/Warehouses/ Godowns)
v. The fee for resubmission of rejected Building Plan application/permit shall be charged at the rate of Rs. 1/- per sqm of built up area for upto three subsequent rejections. In case the Building Plan application/permit is rejected for the fourth and fifth time, the Building Permit fee shall be charged at the rate of 25% and 50% respectively of the original Building Permit fee (i. above) - calculated for the first time, on the same Online ID. In case, the Building Plan application/permit is rejected for the sixth time, the applicant/ architect shall have to pay 100% processing/ permit fee and will have to apply with new online ID afresh.
b. Stacking Charges
i) Rs. 20/- per sq.m of proposed Built Up Area including basement and stilts. plots size up to 100 sq.m
ii) Rs. 50/- per sq.m of proposed Built Up area including basement and stilts. Plots size above 100-2000 sq.m
iii) Rs.5/per sqm of proposed Built Up Area including basement and stilts. Storage Building/Warehouses/ Godowns
iv) For plots above 2000 sq.m, the material will be stacked inside the plot area.