| 1. Building Address | Plot No. | Scheme/Colony Town | District | |
| 2. Building function & Locations | ||||
| 2.1 Use | Institutional | Commercial Industrial * | ||
| 2.2 Importance | Ordinary | Important | Hazardous * | IS:1893 |
| 2.3 Seismic Zone(Design Intensity Used | V(IX) | IV(VIII) | III(VII) | II(VI) IS:1893 |
| 3. Design EQ Factor | □0=...... | I=...... | □= □h | □□= IS:1893 |
4. Foundation
4.1 Soil type at site (Note 2) Rock/stiff Medium # Soft Liquefiable Expensive (B.C.) IS:1904
4.2 Type of Foundation Strip Indiv.Col. Fottings/Raft Bearing Piles Friction Piles IS:1893
6. Steel / R.C. frame buildings
YES / NO YES / NO YES / NO YES / NO
Notes: -
-
Encircle the applicable Data point or insert information.
-
Stiff. N>30: Medium. N=10.3:Soft.N<10:Liquefiable,poorly graded
Sands with N<15 under Water Table (see Note 5 of Table 1 in IS:1893)
Where N=Standard Penetration (IS:2131-1981).
-
* Means any other, specify.
-
C= Cement, S= Sand, L= Lime
The above information is factually correct.
Signature of Owner with date
Name (Block)…
Signature of the Engineer who will Supervise the construction
Name (Block)…… Address: Legible Seal: (with address)
Signature of the Architect who had
Supervised the construction
Name (Block)…
COA Registration No……
Legible Seal:
(with address)