A layout map shall be prepared and submitted to obtain development permit for development or redevelopment of any tract of land.
3.1.1.1 Contents of the proposed layout map:
Every layout map shall contain sub-plots being formed after sub-division, means of access thereto, parks and open spaces, if any, required under paragraph 3.1.2 (including 3.1.2.4 landscape plan), spaces for community facilities, if any, required under paragraph 3.1.4 (including services plan), along with other mandatory compliances required as per the Master Plan/ Zonal Development Plan/ byelaws.
3.1.1.2 Minimum plot sizes in a layout map:
The minimum plot sizes for different use categories shall be as given in paragraph 3.2 of this byelaws relating to minimum plot sizes for buildings across use categories.
3.1.1.3 Means of Access:
The means of access to the land proposed for a layout shall be from a public street/road as required in these byelaws. Such access road shall be free from encroachment, encumbrances, and obstructions. The minimum width of existing access road to the proposed layout shall be as follows.
| Sl. | Layout - Use Type | Minimum Width of Access Road (Built-up) | Minimum Width of Access Road (Non-Built-up) |
|---|---|---|---|
| 1 | Residential | 6m | 9m up to 10 acres 12m from >10 to 25 acres 18m above 25 acres |
| 2 | Non-Residential (Commercial & Institutional) | 12m | 12m up to 10 acres 18m from >10 to 25 acres 24m above 25 acres |
Note:
(a) For a residential layout comprising of group housing projects, the minimum width of access road shall be 12m. For plot sizes up to 1000 sqm in built-up area, this requirement shall be relaxed to 9m.
(b) For buildings permissible in agricultural land use, such as single factory unit, the minimum width of access road shall be 7.0 m.
3.1.1.4 Sub-division/amalgamation of plots in layouts approved/developed by the Authority
3.1.1.4.1 Sub-division
(i) Sub-division shall be permissible on minimum road width of 9-meters (for residential) and 12- meters (for non-residential).
(ii) The size of each plot after sub-division shall not be less than 100 square meters (for residential).
(iii) The use of the sub-divided plot shall be the same as of the original plot.
(iv) Ground Coverage, FAR and setback of the original plot shall be applicable to each sub-divided plot.
(v) The development fee and sub-division charges shall be applicable for sub-division of plots.
3.1.1.4.2 Amalgamation
(i) Amalgamation shall be permissible on minimum road width of 9-meters (for residential) and 12- meters (for non-residential).
(ii) Amalgamation of maximum four plots shall be allowed at one time.
(iii) Ground coverage, FAR and setback of the amalgamated plot shall be applicable as per amalgamated plot size.
(iv) The use of the amalgamated plot shall generally be the same as the original plot.
(v) In plots where construction has been done a revised map shall have to be submitted and charges shall also be applicable.
(vi) The development fee and amalgamation charges shall be applicable for amalagamation of plots.