(i) The project of group housing / sub-division layout shall be classified on the basis of their areas as follows:
| S. No. | Habitat Description | Plains | Hills | ||
| Area (Ha) | Area (Ha) | ||||
| Min | Max | Min | Max | ||
| 1 | Sub Cluster | 0.20 | 2.0 | 0.10 | 1.0 |
| 2 | Cluster | 2.01 | 6.0 | 1.01 | 3.0 |
| 3 | Neighborhood | 6.01 | 20.0 | 3.01 | 10.0 |
| 4 | Township | 20.01 | 40.0 | 10.01 | 20.0 |
| 5 | Special Township | Above 40.0 | Above 20.0 | ||
Table 23: Classification of Group Housing / Sub-division layout
Note The detail provision of Special Township shall be fixed separately
(ii) Registration ofRegistered Habitat Developer in the respective Habitat category is mandatory.
However, for layout (sub-division) projects of less than one acreand for projects (layout and group housing) Within the Development Area / Special Development Area, such registration is not mandatory. Processing fee for such projects is Rs 50,000.00and for projects of area more than one acre, the processing fee and Bank Guarantee will be as per the provisions of Group Housing.
(iii) Dwelling Unit Density: 500 Dwelling unit per hectare(For Hills and Plain)
| S. No. | Plot Size | Dwelling Unit Density |
|---|---|---|
| 1 | Upto 200 sq. mt. Plot size | 1 Unit |
| 2 | 200 sq. mt.- 300sq. mt. | 2 unit |
| 3 | 300- 500sq. mt. | 3 unit |
| 4 | > 500sq. mt. | as per density defined for multiple units |
Table 24:Calculation of Dwelling Unit Density for Layout Plans
On the basis of the proposed population in Group Housing and Layout Schemes, facilities and services viz. health education shall be provided in the projects as mentioned in clause 7.5. Further, for the proposed population in the project, sufficient provisions shall be made w.r.twater supply, electricity, sewer etc. as per the prevailing norms and standards.
The proposed density shall be permissible based upon the availability of potable water demand projected for next ten years, for which NOC from the concerned Authority shall be obtained.
(iv) Internal Road Width (Residential Group Housing and Layout Schemes)
| S. No. | Minimum Road Width (mt.) | Maximum Road Length (mt.) (if it is not in the form of loop street) | |
| Plains | Hills | ||
| 1 | 7.5 | 2 | 100m |
| 2 | 9 | 3 | 200m |
| 3 | 9 | 4.5 | 400m |
| 4 | 12 | 6 | 800m |
| 5 | 15 | 7.5 | 1000m |
| 6 | 18 | 9 | 1000m |
| 7 | Minimum width of loop street 9.0m | Minimum width of loop street 6.0m | Minimum length 400m |
a. Width of such Roads,havingPark / Open space / Inactive uses on one side will be 7.5m in plain and 4.5m (motor-able) 2.0m (pedestrian) in Hills.The maximum length of such road will be 200mt.
b. In EWS and LIG layout schemes the minimum internal roads will be 6.0 mt. in plains and 4.5 mt. (for motor-able roads) and 2.0 mt. (for pedestrian Pathways) in Hills.
(v) Other Provisions
In Group Housing and sub-division layout projects the following facilities / services will be provided in proportion of the total scheme area. In Building where vertical mix uses are permitted the proportion of Public / Semi Public and commercial use will be based on the total FAR of the project
| S. No | Uses / Facilities | Plot size | ||
| 2000 to 4000 sq. mt. | 4000 sq. mt. to 2.0 Hectare | More than 2.0 Hectare | ||
| 1 | Public / Semi Public (Uses ancillary to Residential viz. Educational / Health / Club House / Community Hall etc. | |||
| - | Minimum 1.0% | Minimum 5.0% | ||
| 2 | Commercial | - | Maximum 1.5% | Maximum5% |
| 3 | Organized Green Spaces | Minimum 5% | Minimum 10% | Minimum 15% |
Table 25: Facilities / Services in Group Housing and sub-division layout projects
Note:The above facilities will be based on the Population norms as defined in para 7.5
(vi) Light and Ventilation
In buildings of upto 12.0 mt. height, habitable rooms, where light and ventilation is provided through internal green spaces, the minimum area and width of such spaces will 7.5sq. mt. and 2.5sq. mt. respectively. For building of more than 12.0m height the minimum width of much spaces will be 3.0 m and the area shall be equal to 1 / 5 t h of the height of the adjacent highest wall (e.g. If the height of the highest wall is 21 mt., then the minimum area of the internal open space shall be (21*1 / 5)= 17.64 sq. mt.
| S. No. | Building Height (in mt.) | Area (in sq. mt.) | Minimum Width (mt.) |
|---|---|---|---|
| 1 | Upto 7.0m | 1.2 | 0.9 |
| 2 | Upto 12.0m | 2.8 | 1.3 |
| 3 | Upto 18.0m | 4.0 | 1.5 |
| 4 | Upto 21.0m | 5.4 | 1.8 |
| 5 | More than 21.0m | 6.0 | 2.0 |
Table 26: Size of Ventilation shaft
(vii) Guard Room of maximum 1.6sq. mt. Plinth Area (Minimum width / radius 1.2m)is permissible at the entrance subject is the condition that such construction will not be within the setback required for fire safety
11.5 Affordable Housing
As per the housing policy and the rules (annexure- )