2.0 For the purpose of this Section, the following definitions shall apply.
2.1 Automatic Rescue Device — A device meant to bring a lift stuck between floors due to loss of power, to the nearest level and open the doors in order to allow trapped passengers to be evacuated. Such a device may use some form of internal auxiliary power source for such purpose, complying with all the safety requirements of a lift during normal run. The speed of travel is usually lower than the normal speed. In the case of manual doors on reaching the level, the device shall allow the door to be opened and in case of power operated doors the device shall automatically open the door.
2.2 Baluster — A short pillar slender above and bulging below.
2.2.1 Balustrade — A row of balusters meant for supporting moving handrails.
2.3 Bottom Car Runby — The distance between the car buffer striker plate and the striking surface of the car buffer when the car is in level with the bottom terminal landing.
2.4 Bottom Coutnerweight Runby — The distance between the counter weight buffer striker plate and the striking surface of the counterweight buffer when the car is in level with the top terminal landing.
2.5 Buffer — A device designed to stop a descending car or counter weight beyond its normal limit of travel by storing or by absorbing and dissipating the kinetic energy of the car or counterweight.
2.5.1 Oil Buffer — A buffer using oil as a medium
which absorbs and dissipates the kinetic energy of the descending car or counterweight.
2.5.1.1 Oil buffer stroke — The oil displacing movement of the buffer plunger or piston, excluding the travel of the buffer plunger accelerating device.
2.5.2 Spring Buffer — A buffer which stores in a spring the kinetic energy of the descending car or counterweight.
2.5.2.1 Spring buffer load rating — The load required to compress the spring by an amount equal to its stroke.
2.5.2.2 Spring buffer stroke — The distance, the contact end of the spring can move under a compressive load until the spring is compressed solid.
2.6 Call Indicator — A visual and audible device in the car to indicate to the attendant the lift landings from which calls have been made.
2.7 Car Bodywork — The enclosing bodywork of the lift car which comprises the sides and roof and is built upon the car platform.
5
2.8 Car Door Electric Contact — An electric device, the function of which is to prevent operation of the driving machine by the normal operating device unless the car door is in the closed position.
2.9 Car Frame — The supporting frame or sling to which the platform of the lift car, its safety gear, guide shoes and suspension ropes are attached.
2.10 Car Platform — The part of the lift car which forms the floor and directly supports the load.