1 Hazardous areas are classified into different zones, depending upon the extent to which an explosive atmosphere could exist at that place. In such areas flame proof switchgear, fittings, accessories, have to be used/installed in flameproof enclosure. 2 An electrical apparatus is not considered as flameproof unless it complies with the appropriate statutory regulations. 3 Other types of fittings are also in vogue in wiring installations, for example, ‘increased safety’.
2.1.45 Flame Retardant Cable — Flame retardant cable with reduced halogen evaluation and smoke.
2.1.46 Fuse — A device that, by the fusion of one or more of its specially designed and proportioned components, opens the circuit in which it is inserted when the current through it exceeds a given value for a sufficient time. The fuse comprises all the parts that form the complete device.
2.1.47 Fuse-Element — A part of the fuse-link designed to melt under the action of current exceeding some definite value for a definite period of time.
2.1.48 Harmonics (Current and Voltage) — All alternating current which is not absolutely sinusoidal is made up of a fundamental and a certain number of current harmonics which are the cause of its deformation (distortion) when compared to the theoretical sine-wave.
2.1.49 Inflammable — A material capable of being easily ignited.
2.1.50 Installation (Electrical), of Buildings — An assembly of associated electrical equipment to fulfil a specific purpose or purposes and having coordinated characteristics.
2.1.51 Insulated — Insulated shall mean separated from adjacent conducting material or protected from personal contact by a non-conducting substance or an air space, in either case offering permanently sufficient resistance to the passage of current or to disruptive discharges through or over the surface of the substance or space, to obviate danger or shock or injurious leakage of current.
2.1.52 Insulation, Basic — Insulation applied to live parts to provide basic protection against electric shock.
NOTE — Basic insulation does not necessarily include insulation used exclusively for functional purposes.
2.1.53 Insulation, Double — Insulation comprising both basic and supplementary insulation.
2.1.54 Insulation (Electrical) — Suitable non-conducting material, enclosing, surrounding or supporting a conductor.
2.1.55 Insulation, Reinforced — Single insulation applied to live parts, which provides a degree of protection against electric shock equivalent to double insulation under the conditions specified in the relevant standard.
NOTE — The term ‘single insulation’ does not imply that the insulation must be one homogeneous piece. It may comprise several layers which cannot be tested singly as supplementary or basic insulation.
2.1.56 Insulation, Supplementary — Independent insulation applied in addition to basic insulation in order to provide protection against electric shock in the event of a failure of basic insulation.
2.1.57 Linked Switch — Switches linked together mechanically so as to operate simultaneously or in definite sequence.
2.1.58 Live or Alive — Electrically charged so as to have a potential different from that of earth.
2.1.59 Locations, Industrial — Locations where tools and machinery requiring electrical wiring are installed for manufacture or repair.
2.1.60 Locations, Non-Industrial — Locations other than industrial locations, and shall include residences, offices, shops, showrooms, stores and similar premises requiring electrical wiring for lighting, or similar purposes.
2.1.61 Miniature Circuit Breaker — Mechanical switching device capable of making, carrying and breaking currents under normal circuit conditions and also making carrying currents for specified times and automatically breaking currents under specified abnormal circuit conditions such as those of overload and short circuits.
2.1.62 Multiple Earthed Neutral System — A system of earthing in which the parts of an installation specified to be earthed are connected to the general mass of earth and, in addition, are connected within the installation to the neutral conductor of the supply system.
2.1.63 Neutral Conductor — Includes the neutral conductor of a three-phase four-wire system, the conductor of a single-phase or dc installation which is earthed by the supply undertaking (or otherwise at the source of the supply), and the middle wire or common return conductor of a three-wire dc or single-phase ac system.
2.1.64 Plug — A device, provided with contact pins, which is intended to be attached to a flexible cable, and which can be engaged with a socket outlet or with a connector.
2.1.65 Point (in Wiring) — A termination of the fixed wiring intended for the connection of current using equipment.
2.1.66 Residual Current Circuit Breaker — A mechanical switching device design to make, carry and break currents under normal service conditions and to cause the opening of the contacts when the residual currents attains a giving value under specified conditions.
2.1.67 Service — The conductors and equipment required for delivering energy from the electric supply system to the wiring system of the premises served.
2.1.68 Socket-Outlet — Accessory having socket contacts designed to engage with the pins of a plug and having terminals for the connection of cable(s).
NOTE — A luminaire track system is not regarded as a socketoutlet system.
2.1.69 Switch — A mechanical switching device capable of making, carrying and breaking current under
normal circuit conditions, which may include specified operating overload conditions, and also of carrying for a specified time currents under specified abnormal circuit conditions such as those of short circuit.
NOTE — A switch may also be capable of making, but not breaking, short-circuit currents.
2.1.70 Switchboard — An assembly of switchgear with or without instruments, but the term does not apply to a group of local switches in a final circuit.
NOTE — The term ‘switchboard’ includes a distribution board.
2.1.71 Switch Disconnectors — A device used to open (or close) a circuit when either negligible current is interrupted (or established) or when the significant change in the voltage across the terminals of each of the pole of the disconnectors occurs; in the open position it provides an isolating distance between the terminals of each pole.
2.1.72 Switch Disconnector Fuse — A composite unit, comprising a switch with the fuse contained in or mounted on the moving member of the switch.
2.1.73 Switchgear — A general term covering switching devices and their combination with associated control, measuring, protective and regulating equipment, also assemblies of such devices and equipment with associated interconnections, accessories, enclosures and supporting structures, intended in principle for use in connection with generation, transmission, distribution and conversion of electric energy.
2.1.74 Usable Wall Space — All portions of a wall, except that occupied by a door in its normal open position, or occupied by a fire place opening, but excluding wall spaces which are less than 1 m in extent measured along the wall at the floor line.
2.1.75 Voltage, Extra Low (ELV) — The voltage which does not normally exceed 50 V.
2.1.76 Voltage, Low (LV) — The voltage which normally exceed 50 V but does not normally exceed 250 V.
2.1.77 Voltage, Medium (MV) — The voltage which normally exceeds 250 V but does not exceed 650 V.
2.1.78 Voltage, High (HT, HV) — The voltage which normally exceeds 650 V but less than or equal to 33 kV.
2.1.79 Voltage, Extra High (EHT) — The voltage, which normally exceeds 33 kV.
2.1.80 Weatherproof — Accessories, lighting fittings, current-using appliances and cables are said to be of the weatherproof type, if they are so constructed that when installed in open situation they will withstand the effects of rain, snow, dust and temperature variations.
For definition of other terms reference may be made to accepted standards [8-2(1)].
2.2 Conventional Symbols
The architectural symbols that are to be used in all drawings, wiring plans, etc, for electrical installations in buildings shall be as given in Annex A.
For other graphical symbols used in electrotechnology, reference may be made to good practice [8-2(1)].




