- (a) (i)Applicant's Full Name (in block letters) (ii)Applicant's address
(a) Name and address of Licensed Surveyor/Engineer/Structural Engineer or Supervisor/Architect employed/Professionals on Records …
(c)No. and date of issue of license ……………….. Valid up to ……………
- Is the plot affected by any reservation or road lines? If so, are these correctly and clearly marked on the block plan?
3)*(a)What is the total area of the plot according to the document?
*(b)Does it tally with the Collector's record?
*(c) What is the actual area available on site measured by the licensed surveyor/architect/engineer/supervisor or architect?
(d)If there is any deduction in the original area of the plot on account of road lines or reservation? Please state the total area of such deductions.
(e) If so, what is the net area?
(f) Is the clearance under Urban Land (Ceiling and Regulations) Act, 1976 obtained? If so, what is the area allowed for development? Clearance under Urban Land (Ceiling and Regulations) Act, 1976 else an undertaking.
*Permission will be based on the minimum of areas in (a), (c) or (f) above.
Note. -INDICATE DETAILS ON THE SITE/BUILDING PLAN AS IN FORM 1.
4)Are all plans as required under Regulations 10(3) enclosed?
- (a) Is the plot part of a city triangulation survey number, revenue survey number or hissa number or a final plot number (city survey number) of a Town Planning Schemes or a part of an approved layout?
(b) Please state sanction number and date of sub-division/layout.
- (a) In what zone does the plot fall?
(b) What is the permissible Floor Space Index of the Zone?
(c) What is the number of tenements per net hectare permissible in the zone?
7(a) Is the use of every room in the proposed work marked on the plans?
(b) Is it in accordance with the Regulations?
316
(c) Does the building fall in the category of-
(i) Special building as defined in Regulations 2(iv)(17)(n)
(ii) High rise building as defined in Regulations 2(iv)(75)
APPENDICES AND ANNEXURES
DCPR-2034
8 If the work is in connection with an industry-
a) Please briefly describe the main and accessory processes.
b) Please state the maximum number of workmen and the total KW likely to be employed per shift in the factory.
c) Under what industrial classification does it fall? (Reference to relevant Regulation should be given).
d) Is the proposal for relocation of an existing industry? If so, give the name and address of the existing industry.
Note. - The permission will be based on the area which is minimum.
e) If the proposal is for the establishment of a new industry or for the expansion of an existing industry, is a copy of the "No Objection Certificate" from the Department of Industries enclosed [see Regulations No. 18(k) wherever applicable?
f) Will the building be away from the boundary of a residential or commercial zone or as per Table 18(B) in Regulations 41(4)?
g) Is the proposal for a service industrial estate on a plot reserved for service industries or in industrial zone?
h) Nature and quantum of industrial waste/effluents and methods of disposal be stated.
- (a)What is the average-
(i) Prescribed width and
(ii) Existing width of the street?
(If the plot abuts two or more streets, information for all streets should be given).
(b)What is the height of the building-?
(i) above the average ground level of the plot? Does it comply with Regulations 43?
- (a) If there are existing structures on the plot-
(i)Are they correctly marked and numbered on the site plan?
(ii) Are those proposed to be demolished immediately coloured yellow?
(iii) What is the plinth area and total floor area of all existing structures to be retained?
(Please indicate in the appended Statement 'A' with details)
(iv) What is the number of existing tenements in the structure(s) to be retained?
(b)What is the plinth area and total floor area of the proposed work or building?
(Please indicate in appended statement ’B’ with details
(c) What is the number of tenements proposed?
Note. - INDICATE DETAILS OF THE BUILDING PLAN AS IN FORM 1.
- (a) Please state the plinth area and total floor area, existing and proposed (i.e. totals of items 10) a) (iii) and 10(b).
b) Please state the Development Rights, if any, proposed to be used and the floor space index credit available there under.
APPENDICES AND ANNEXURES
DCPR-2034
c) Please state the overall floor space index [Item 11(a) divided by Item 3(e)] plus the floor space index available due to Development Rights.
d) Does the work consume the full floor space index of the plot, as given in item 6(b)?
If not, why not?
e) Is the building proposed with setbacks on upper floors?
f) What is the total number of tenements [Item 10(a) (iv) plus Item 10(c)]?
Note. -INDICATE DETAILS ON THE BUILDING PLAN AS IN FORM 1.
- (a) What is the width of the front open space? If the building abuts two or more streets, does the front open space comply with Regulations 41(1)
(b) Please state which of the sub-Regulations of Regulations 41 and/or any other Regulations is applicable for the open space?
13)Does the front open space comply with the Regulations?
- (a) What is-
(i) the width of side open space (s)?
(ii) the width of rear open space (s)?
(iii) the distance between buildings?
(b) Do they comply with Regulations 41(2)(i)(a)?