This Part of the Code covers the requirements of building materials and components, and criteria for accepting new or alternative building materials and components.
b) The list at the end of this part has been completely reclassified to make it more user friendly and updated to reflect the latest available Indian Standard and methods of test.
A reference to SP 21 ‘Summaries of Indian Standards for building materials’ may be useful. This publication gives the summaries of Indian Standards covering various building materials, fittings and components except standards relating to paints.
All standards cross-referred to in the main text of this Part, are subject to revision. The parties to agreement based on this section are encouraged to investigate the possibility of applying the most recent editions of the standards.
Every material used in fulfilment of the requirements of this Part, unless otherwise specified in the Code or approved, shall conform to the relevant Indian Standards. A list of Indian Standards as the ‘accepted standards’ is given at the end of this Part of the Code. At the time of publication of the Code, the editions indicated were valid. All standards are subject to amendments and revisions. The Authority shall take cognizance of such amendments and revisions. The latest version of a standard shall, as far as possible, be adopted at the time of enforcement of this Part of the Code.
712 : 1984 Specification for building limes (third revision)
1624 : 1986 Method of field testing of building lime (first revision)
2686 : 1977 Specification for cinder as fine aggregates for use in lime concrete (first revision)
3068 : 1986 Specification for broken brick (burnt-clay) coarse aggregates for use in lime concrete (second revision)
3115 : 1992 Specification for lime based blocks (second revision)
3182 : 1986 Specification for broken bricks (burnt clay) fine aggregates for use in lime mortar (second revision)
4098 : 1983 Specification for lime-pozzolana mixture (first revision)
4139 : 1989 Specification for calcium silicate bricks (second revision)
6932 Method of tests for building limes: (Part 1) : 1973 Determination of insoluble residue, loss on ignition, insoluble matter, silicon dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide
(Part 2) : 1973 Determination of carbon dioxide content
(Part 3) : 1973 Determination of residue on slaking of quicklime
(Part 4) : 1973 Determination of fineness of hydrated lime
(Part 5) : 1973 Determination of unhydrated oxide
| IS No. | Title | IS No. | Title |
| (Part 6):1973 | Determination of volume yield of quicklime | 6165:1992 | Dimensions for special shapes of clay bricks (first revision) |
| (Part 7):1973 | Determination of compressive and transverse strength | 11650:1991 | Guide for manufacture of common burnt clay building bricks by semi-mechanized process (first revision) |
| (Part 8):1973 | Determination of workability | ||
| (Part 9):1973 | Determination of soundness | 13757:1993 | Specification for burnt clay fly ash building bricks |
| (Part 10):1973 | Determination of popping and pitting of hydrated lime | d) Jallies | |
| (Part 11):1984 | Determination of setting time of hydrated lime | 7556:1988 | Specification for burnt clay jallies (first revision) |
| 10360:1982 | Specification for lime pozzolana concrete blocks for paving | e) Tiles | |
| 10772:1983 | Specification for quick setting lime pozzolana mixture | 654:1992 | Specification for clay roofing tiles, Mangalore pattern (third revision) |
| 12894:2002 | Specification for pulverized fuel ash lime bricks (first revision) | 1464:1992 | Specification for clay ridge and ceiling tiles (second revision) |
| 6. BURNT CLAY PRODUCTS | 6. BURNT CLAY PRODUCTS | 1478:1992 | Specification for clay flooring tiles (second revision) |
| a) Blocks | 2690 | Specification for burnt clay flat terracing tiles: | |
| 3952:1988 | Specification for burnt hollow bricks for walls and partitions (second revision) | (Part 1):1993 | Machine made (second revision) |
| 3952:1988 | Specification for burnt hollow bricks for walls and partitions (second revision) | (Part 2):1992 | Handmade (second revision) |
| b) Soil-Based Products | b) Soil-Based Products | 3367:1993 | Specification for burnt clay tiles for use in lining irrigation and drainage works (second revision) |
| 1725:1982 | Specification for soil-based blocks used in general building construction | 3951 | Specification for hollow clay tiles for floor and roofs: |
| c) Bricks | |||
| 1077:1992 | Specification for common burnt clay building bricks (fifth revision) | (Part 1):1975 | Filler type (first revision) |
| 1077:1992 | Specification for common burnt clay building bricks (fifth revision) | (Part 2):1975 | Structural type (first revision) |
| 2117:1991 | Guide for manufacture of hand-made-common burnt clay building bricks (third revision) | 13317:1992 | Specification for clay roofing camty tiles, half round and flat tiles |
| 2180:1988 | Specification for heavy duty burnt clay building bricks (third revision) | 7. CEMENT AND CONCRETE (including concrete reinforcement) | 7. CEMENT AND CONCRETE (including concrete reinforcement) |
| 2222:1991 | Specification for burnt clay perforated building bricks (fourth revision) | a) Aggregates | |
| 2691:1988 | Specification for burnt clay facing bricks (second revision) | 383:1970 | Specification for coarse and fine aggregates from natural sources for concrete (second revision) |
| 3495(Parts 1 to 4):1992 | Methods of test of burnt clay building bricks (third revision) | 1542:1992 | Specification for sand for plaster (second revision) |
| 3583:1988 | Specification for burnt clay paving bricks (second revision) | 2116:1980 | Specification for sand for masonry mortars (first revision) |
| 4885:1988 | Specification for sewer bricks (first revision) | 2386 | Methods of test for aggregates for concrete: |
| 5454:1978 | Methods for sampling of clay building bricks | (Part 1):1963 | Particle size and shape |
| 5779:1986 | Specification for burnt clay soling bricks (first revision) | (Part 2):1963 | Estimation of deleterious materials and organic impurities |
| (Part 3):1963 | Specific gravity, density, voids, absorption and bulking | ||
| IS No. | Title | IS No. | Title |
| (Part 4):1963 | Mechanical properties | 3812 | Specification for pulverized fuel ash: |
| (Part 5):1963 | Soundness | Specification for pulverized fuel ash: | |
| (Part 6):1963 | Measuring mortar making properties of fine aggregates | (Part 1):2003 | For use as pozzolana in cement, cement mortar and concrete (second revision) |
| (Part 7):1963 | Alkali aggregate reactivity | For use as pozzolana in cement, cement mortar and concrete (second revision) | |
| (Part 8):1963 | Petrographic examination | (Part 2):2003 | For use as admixture in cement mortar and concrete (second revision) |
| 2430:1986 | Methods of sampling of aggregates of concrete (first revision) | For use as admixture in cement mortar and concrete (second revision) | |
| 6579:1981 | Specification for coarse aggregate for water bound macadam (first revision) | 6491:1972 | Method of sampling of flyash |
| 6579:1981 | Specification for coarse aggregate for water bound macadam (first revision) | 6925:1973 | Methods of test for determination of water soluble chlorides in concrete admixtures |
| 9142:1979 | Specification for artificial lightweight aggregates for concrete masonry units | 9103:1999 | Specification for admixtures for concrete (first revision) |
| b) Cement | 12089:1987 | Specification for granulated slag for manufacture of Portland slag cement | |
| 269:1989 | Specification for ordinary portland cement, 33 Grade (fourth revision) | Specification for granulated slag for manufacture of Portland slag cement | |
| 455:1989 | Specification for Portland slag cement (fourth revision) | 12870:1989 | Methods of sampling calcined clay pozzolana |
| 1489 | Specification for Portland pozzolana cement: | 15388:2003 | Specification for silica fume |
| 1489 | Specification for Portland pozzolana cement: | d) Concrete | |
| (Part 1):1991 | Flyash based (third revision) | 456:2000 | Code of practice for plain and reinforced concrete (fourth revision) |
| (Part 2):1991 | Calcined clay based (third revision) | Code of practice for plain and reinforced concrete (fourth revision) | |
| 3466:1988 | Specification for masonry cement (second revision) | 1343:1980 | Code of practice for prestressed concrete (first revision) |
| 6452:1989 | Specification for high alumina cement for structural use (first revision) | 4926:2003 | Code of practice for ready-mixed concrete (third revision) |
| 6909:1990 | Specification for supersulphated cement | e) Cement and Concrete Sampling and Methods of Test | |
| 8041:1990 | Specification for rapid hardening Portland cement (second revision) | 516:1959 | Methods of test for strength of concrete |
| 8042:1989 | Specification for white Portland cement (second revision) | 1199:1959 | Methods of sampling and analysis of concrete |
| 8043:1991 | Specification for hydrophobic Portland cement (second revision) | 2770 | Methods of testing bond in reinforced concrete: Part 1 Pullout test |
| 8112:1989 | Specification for 43 grade ordinary Portland cement (first revision) | (Part 1):1967 | Methods of testing bond in reinforced concrete: Part 1 Pullout test |
| 12269:1987 | Specification for 53 grade ordinary Portland cement | 3085:1965 | Methods of test for permeability of cement mortar and concrete |
| 12330:1988 | Specification for sulphate resisting Portland cement | 3535:1986 | Methods of sampling hydraulic cement (first revision) |
| 12600:1989 | Specification for low heat Portland cement | 4031 | Methods of physical tests for hydraulic cement: |
| c) Mineral/Chemical Admixtures and Pozzolanas | c) Mineral/Chemical Admixtures and Pozzolanas | (Part 1):1996 | Determination of fineness by dry sieving (second revision) |
| 1344:1981 | Specification for calcined clay pozzolana (second revision) | (Part 2):1999 | Determination of fineness by specific surface by Blaine air permeability method (second revision) |
| 1727:1967 | Methods of test for pozzolanic materials (first revision) | Determination of fineness by specific surface by Blaine air permeability method (second revision) |
IS No. Title
(Part 3) : 1988 Determination of soundness (first revision)
(Part 4) : 1988 Determination of consistency of standard cement paste (first revision)
(Part 5) : 1988 Determination of initial and final setting times (first revision)
(Part 6) : 1988 Determination of compressive strength of hydraulic cement (other than masonry cement) (first revision)
(Part 7) : 1988 Determination of compressive strength of masonry cement (first revision)
(Part 8) : 1988 Determination of transverse and compressive strength of plastic mortar using prism (first revision)
(Part 9) : 1988 Determination of heat of hydration (first revision)
(Part 10) : 1988 Determination of drying shrinkage (first revision)
(Part 11) : 1988 Determination of density (first revision)
(Part 12) : 1988 Determination of air content of hydraulic cement mortar (first revision)
(Part 14) : 1989 Determination of false set
(Part 15) : 1991 Determination of fineness by wet sieving
4032 : 1985 Methods of chemical analysis for hydraulic cement (first revision)
5816 : 1999 Method of test for splitting tensile strength of concrete (first revision)
8142 : 1976 Methods of test for determining setting time of concrete by penetration resistance
9013 : 1978 Method of making, curing and determining compressive strength of accelerated cured concrete test specimens
9284 : 1979 Method of test for abrasion resistance of concrete
12423 : 1988 Methods for colorometric analysis of hydraulic cement
12803 : 1989 Methods of analysis of hydraulic cement by X-ray fluorescence spectrometer
IS No. Title
12813 : 1989 Method of analysis of hydraulic cement by atomic absorption spectrophotometer
13311 Methods of non-destructive testing of concrete:
(Part 1) : 1992 Ultrasonic pulse velocity
(Part 2) : 1992 Rebound hammer
1834 : 1984 Specification for hot applied sealing compound for joint in concrete (first revision)
1838 Specification for preformed fillers for expansion joint in concrete pavements and structures (non-extruding and resilient type):
(Part 1) : 1983 Bitumen impregnated fibre (first revision)
(Part 2) : 1984 CNSL aldehyde resin and coconut pith
10566 : 1983 Methods of test for preformed fillers for expansion joints in concrete paving and structural construction
11433 Specification for one grade polysulphide based joint sealant:
(Part 1) : 1985 General requirements
(Part 2) : 1986 Methods of test
12118 Specification for two parts polysulphide based sealants:
(Part 1) : 1987 General requirements
(Part 2) : 1987 Methods of test
432 Specification for mild steel and medium tensile steel bars and hard drawn steel wire for concrete reinforcement:
(Part 1) : 1982 Mild steel and medium tensile steel bars (third revision)
(Part 2) : 1982 Hard drawn steel wire (third revision)
1566 : 1982 Specification for hard drawn steel wire fabric for concrete reinforcement (second revision)
1608 : 1995 Mechanical testing of materials — Tensile testing
1785 Specification for plain hard drawn steel wire for prestressed concrete:
| IS No. | Title | IS No. | Title |
| (Part 1): 1983 | Cold drawn stress-relieved wire (second revision) | 6073: 1971 | Specification for autoclaved reinforced cellular concrete floor and roof slabs |
| (Part 2): 1983 | As drawn wire (first revision) | ||
| 1786: 1985 | Specification for high strength deformed steel bars and wires for concrete reinforcement (third revision) | 6441 | Methods of test for autoclaved cellular concrete products: |
| (Part 1): 1972 | Determination of unit weight or bulk density and moisture content | ||
| 2090: 1983 | Specification for high tensile steel bars used in prestressed concrete (first revision) | (Part 2): 1972 | Determination of drying shrinkage |
| (Part 4): 1972 | Corrosion protection of steel reinforcement in autoclaved cellular concrete | ||
| 6003: 1983 | Specification for indented wire for prestressed concrete (first revision) | (Part 5): 1972 | Determination of compressive strength |
| 6006: 1983 | Specification for uncoated stress-relieved strand for prestressed concrete (first revision) | (Part 6): 1973 | Strength, deformation and cracking of flexural members subject to bending-short duration loading test |
| 10790 | Methods of sampling of steel for prestressed and reinforced concrete: | (Part 7): 1973 | Strength, deformation and cracking of flexural members subject to bending-sustained loading test |
| (Part 1): 1984 | Prestressing steel | (Part 8): 1973 | Loading tests for flexural members in diagonal tension |
| (Part 2): 1984 | Reinforcing steel | ||
| 13620: 1993 | Specification for fusion bonded epoxy coated reinforcing bars | (Part 9): 1973 | Jointing of autoclaved cellular concrete elements |
14862 : 2000 Specification for fibre cement flat sheets
14871 : 2000 Specification for products in fibre reinforced cement long corrugated or asymmetrical section sheets and fittings for roofing and cladding
iv) Concrete Pipes and Pipes Lined/Coated with Concrete or Mortar
458 : 2003 Specification for precast concrete pipes (with and without reinforcement) (fourth revision)
784 : 2001 Specification for prestressed concrete pipes (including specials) (second revision)
1916 : 1989 Specification for steel cylinder pipe with concrete lining and coating (first revision)
3597 : 1998 Methods of test for concrete pipes (second revision)
4350 : 1967 Specification for concrete porous pipes for under drainage
7319 : 1974 Specification for perforated concrete pipes
7322 : 1985 Specification for specials for steel cylinder reinforced concrete pipes (first revision)
15155 : 2002 Specification for bar/wire wrapped steel cylinder pipe with mortar lining and coating
1998 : 1962 Methods of test for thermosetting synthetic resin bonded laminated sheets
2036 : 1995 Specification for phenolic laminated sheets (second revision)
2046 : 1995 Specification for decorative thermosetting synthetic resin bonded laminated sheets (second revision)
| IS No. | Title | IS No. | Title |
| 212 : 1983 | Specification for crude coal tar for general use (second revision) | 1218 : 1978 | Determination of phenols (first revision) |
| 215 : 1995 | Specification for road tar (third revision) | 1219 : 1978 | Determination of naphthalene (first revision) |
| 216 : 1961 | Specification for coal tar pitch (first revision) | 1220 : 1978 | Determination of volatile matter content (first revision) |
| 217 : 1988 | Specification for cutback bitumen (second revision) | 3117 : 2004 | Specification for bitumen emulsion for roads (anionic type) (first revision) |
| 218 : 1983 | Specification for creosote oil for use as wood preservatives (second revision) | 8887 : 2004 | Specification for bitumen emulsion for roads (cationic type) (second revision) |
| 454 : 1994 | Specification for cutback bitumen from waxy crude (second revision) | ||
| 702 : 1988 | Specification for industrial bitumen (second revision) | 9381 : 1979 | Methods for testing tar and bituminous materials: Determination of FRAASS breaking point of bitumen |
| 1201 to 1220 | Methods for testing tar and bituminous materials | ||
| 1201 : 1978 | Sampling (first revision) | 9382 : 1979 | Methods for testing tar and bituminous materials: Determination of effect of heat and air by thin film oven test |
| 1202 : 1978 | Determination of specific gravity (first revision) | ||
| 1203 : 1978 | Determination of penetration (first revision) | 10511 : 1983 | Method for determination of asphaltenes in bitumen by precipitation with normal haptane |
| 1204 : 1978 | Determination of residue of specified penetration (first revision) | ||
| 1205 : 1978 | Determination of softening point (first revision) | 10512 : 2003 | Method for determination of wax content in bitumen (first revision) |
| 1206 (Part 1) : 1978 | Determination of viscosity: Industrial viscosity (first revision) | 13758 (Part 1) : 1993 | Coal tar pitch: Determination of matter insoluble in quinoline |
| (Part 2) : 1978 | Absolute viscosity (first revision) | (Part 2) : 1993 | Determination of coking value |
| (Part 3) : 1978 | Kinematic viscosity (first revision) | 15172 : 2002 | Methods for testing tar and bituminous materials — Determination of curing index for cutback bitumens |
| 1207 : 1978 | Determination of equiviscous temperature (EVT) (first revision) | ||
| 1208 : 1978 | Determination of ductility (first revision) | 15173 : 2002 | Methods for testing tars and bituminous materials — Determination of breaking point for cationic bitumen emulsion |
| 1209 : 1978 | Determination of flash point and fire point (first revision) | ||
| 1210 : 1978 | Float test (first revision) | 15174 : 2002 | Methods for testing tar and bituminous material — Determination of breaking point for anionic bitumen emulsion |
| 1211 : 1978 | Determination of water content (Dean and Stark method) (first revision) | ||
| 1212 : 1978 | Determination of loss of heating (first revision) | 15462 : 2004 | Specification for polymer and rubber modified bitumen |
| 1213 : 1978 | Distillation test (first revision) | ||
| 1215 : 1978 | Determination of matter insoluble in toluene (first revision) | 3. BUILDER'S HARDWARE | |
| 1216 : 1978 | Determination of solubility in carbon disulphide or trichloroethylene (first revision) | 204 (Part 1) : 1991 | Specification for tower bolts: Ferrous metals (fifth revision) |
| (Part 2) : 1992 | Non-ferrous metals (fifth revision) | ||
| 1217 : 1978 | Determination of mineral matter (ASH) (first revision) | 205 : 1992 | Specification for non-ferrous metal butt hinges (fourth revision) |
| IS No. | Title | IS No. | Title |
| 206 : 1992 | Specification for tee and strap hinges (fourth revision) | 4992 : 1975 | Specification for door handles for mortice locks (vertical type) (first revision) |
| 208 : 1996 | Specification for door handles (fifth revision) | 5187 : 1972 | Specification for flush bolts (first revision) |
| 281 : 1991 | Specification for mild steel sliding door bolts for use with padlock (third revision) | 5899 : 1970 | Specification for bathroom latches |
| 5930 : 1970 | Specification for mortice latch (vertical type) | ||
| 362 : 1991 | Specification for parliament hinges (fifth revision) | 6315 : 1992 | Specification for floor springs (hydraulically regulated) for heavy doors (second revision) |
| 363 : 1993 | Specification for hasps and staples (fourth revision) | ||
| 364 : 1993 | Specification for fanlight catch (third revision) | 6318 : 1971 | Specification for plastic window stays and fasteners |
| 452 : 1973 | Specification for door springs, rat-tail type (second revision) | 6343 : 1982 | Specification for door closers (pneumatically regulated) for light door weighing up to 40 kg (first revision) |
| 453 : 1993 | Specification for double-acting spring hinges (third revision) | ||
| 729 : 1979 | Specification for drawer locks, cupboard locks and box locks (third revision) | 6607 : 1972 | Specification for rebated mortice locks (vertical type) |
| 7196 : 1974 | Specification for hold fast | ||
| 1019 : 1974 | Specification for rim latches (second revision) | 7197 : 1974 | Specification for double action floor springs (without oil check) for heavy doors |
| 1341 : 1992 | Specification for steel butt hinges (sixth revision) | 7534 : 1985 | Specification for sliding locking bolts for use with padlocks (first revision) |
| 1823 : 1980 | Specification for floor door stoppers (third revision) | ||
| 1837 : 1966 | Specification for fanlight pivots (first revision) | 7540 : 1974 | Specification for mortice dead locks |
| 2209 : 1976 | Specification for mortice locks (vertical type) (third revision) | 8756 : 1978 |
IS No. Title
632 : 1978 Specification for gamma-BHC (lindane) emulsifiable concentrates (fourth revision)
8944 : 1978 Specification for chlorpyrifos emulsifiable concentrates
2645 : 2003 Specification for integral waterproofing compounds for cement mortar and concrete (second revision)
6925 : 1973 Methods of test for determination of water soluble chlorides in concrete admixtures
9103 : 1999 Specification for concrete admixtures (first revision)
1834 : 1984 Specification for hot applied sealing compound for joint in concrete (first revision)
1838 Specification for preformed fillers for expansion joint in concrete pavements and structures (non-extruding and resilient type):
(Part 1) : 1983 Bitumen impregnated fibre (first revision)
(Part 2) : 1984 CNSL aldehyde resin and coconut pith 11433 Specification for one grade
(Part 1) : 1985 polysulphide based joint sealant: Part 1 General requirements
12118 Specification for two parts polysulphide based sealants:
(Part 2) : 1987 Methods of test
848 : 1974 Specification for synthetic resin adhesives for plywood (phenolic and aminoplastic) (first revision)
849 : 1994 Specification for cold setting case in glue for wood (first revision)
851 : 1978 Specification for synthetic resin adhesives for construction work (non-structural) in wood (first revision)
852 : 1994 Specification for animal glue for general wood-working purposes (second revision)
4835 : 1979 Specification for polyvinyl acetate dispersion-based adhesives for wood (first revision)
9188 : 1979 Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition
12830 : 1989 Rubber based adhesives for fixing PVC tiles to cement
12994 : 1990 Epoxy adhesives, room temperature curing general purpose
Following are the Indian Standards for various building materials and components, to be complied with in fulfillment of the requirements of the Code.
| In the following list, while enlisting the Indian Standards, the materials have been categorized in such a way as to make the list user friendly. In the process, if so required, some of the standards have been included even in more than one category of products, such as in the category based on composition as well as on end application of the materials. The list has been arranged in alphabetical order of their principal category as given below: | IS No. | Title |
| 733 : 1983 | Specification for wrought aluminium and aluminium alloys, bars, rods and sections for general engineering purposes (third revision) | |
| 737 : 1986 | Specification for wrought aluminium and aluminium alloys, sheet rods and strip for general engineering purposes (third revision) | |
| 1. ALUMINIUM AND OTHER LIGHT METALS AND THEIR ALLOYS | ||
| 2. BITUMEN AND TAR PRODUCTS | ||
| 3. BUILDER'S HARDWARES | 738 : 1994 | Specification for wrought aluminium and aluminium alloy drawn tube for general engineering purposes (third revision) |
| 4. BUILDING CHEMICALS | ||
| 5. BUILDING LIME AND PRODUCTS | ||
| 6. BURNT CLAY PRODUCTS | ||
| 7. CEMENT AND CONCRETE (including concrete reinforcement) | 740 : 1977 | Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (second revision) |
| 8. COMPOSITE MATRIX PRODUCTS (including cement matrix products) | ||
| 9. CONDUCTORS AND CABLES | 1254 : 1991 | Specification for corrugated aluminium sheet (third revision) |
| 10. DOORS, WINDOWS AND VENTILATORS | ||
| 11. ELECTRICAL WIRING, FITTINGS AND ACCESSORIES | 1284 : 1975 | Wrought aluminium alloy bolt and screw stock for general engineering purposes (second revision) |
| 12. FILLERS, STOPPERS AND PUTTIES | ||
| 13. FLOOR COVERING, ROOFING AND OTHER FINISHES | 1285 : 2002 | Specification for wrought aluminium and aluminium alloys, extruded round tube and hollow sections for general engineering purposes (third revision) |
| 14. GLASS | ||
| 15. GYPSUM BASED MATERIALS | ||
| 16. LIGNOCELLULOSIC BUILDING MATERIALS (including timber, bamboo and products thereof) | 2479 : 1981 | Colour code for the identification of aluminium and aluminium alloys for general engineering purposes (second revision) |
| 17. PAINTS AND ALLIED PRODUCTS | ||
| 18. POLYMERS, PLASTICS AND GEOSYNTHETICS/GEOTEXTILES | 2676 : 1981 | Dimensions for wrought aluminium and aluminium alloy sheet and strip |
| 19. SANITARY APPLIANCES AND WATER FITTINGS | ||
| 20. SOIL-BASED PRODUCTS | 2677 : 1979 | Dimensions for wrought aluminium and aluminium alloys, plates and hot rolled sheets |
| 21. STEEL AND ITS ALLOYS | ||
| 22. STONES | ||
| 23. STRUCTURAL SECTIONS | 14712 : 1999 | Wrought aluminium and its alloys — Chequered/tread sheets for general engineering purposes — Specification |
| 24. THERMAL INSULATION MATERIALS | ||
| 25. THREADED FASTENERS AND RIVETS | ||
| 26. UNIT WEIGHTS OF BUILDING MATERIALS | ||
| 27. WATERPROOFING AND DAMP-PROOFING MATERIALS | 2. BITUMEN AND TAR PRODUCTS | |
| 73 : 1992 | Specification for paving bitumen (second revision) | |
| 28. WELDING ELECTRODES AND WIRES | ||
1003 Specification for timber panelled and glazed shutters:
(Part 1) : 2003 Door shutters (fourth revision)
(Part 2) : 1994 Window and ventilator shutters (third revision)
1826 : 1961 Specification for venetian blinds for windows
(Part 1) : 1983 Plywood face panels (fourth revision)
(Part 2) : 1983 Particle board face panels and hardboard face panels (third revision) 2202 Specification for wooden flush door shutters (solid core type):
(Part 1) : 1991 Plywood face panels (fifth revision)
(Part 2) : 1983 Particle board face panels and hardboard face panels (third revision)
4020 Method of tests for door shutters:
(Part 1) : 1998 General (third revision)
(Part 2) : 1998 Measurement of dimensions and squareness (third revision)
(Part 3) : 1998 Measurement of general flatness (third revision)
(Part 4) : 1998 Local planeness test (third revision)
(Part 5) : 1998 Impact indentation test (third revision)
IS No. Title
(Part 6) : 1998 Flexure test (third revision)
(Part 7) : 1998 Edge loading test (third revision)
(Part 8) : 1998 Shock resistance test (third revision)
(Part 9) : 1998 Buckling resistance test (third revision)
(Part 10) : 1998 Slamming test (third revision)
(Part 11) : 1998 Misuse test (third revision)
(Part 12) : 1998 Varying humidity test (third revision)
(Part 13) : 1998 End immersion test (third revision)
(Part 14) : 1998 Knife test (third revision)
(Part 15) : 1998 Glue adhesion test (third revision)
(Part 16) : 1998 Screw withdrawal resistance test (third revision)
4021 : 1995 Specification for timber door, window and ventilator frames
4962 : 1968 Specification for wooden side sliding doors
6198 : 1992 Specification for ledged, braced and battened timber shutters (second revision)
b) Metal Doors, Windows Frames and Ventilators
1038 : 1983 Specification for steel doors, windows and ventilators (third revision)
1361 : 1978 Specification for steel windows for industrial buildings (first revision)
1948 : 1961 Specification for aluminium doors, windows and ventilators
1949 : 1961 Specification for aluminium windows for industrial buildings
4351 : 2003 Specification for steel door frames (second revision)
6248 : 1979 Specification for metal rolling shutters and rolling grills (first revision)
7452 : 1990 Specification for hot rolled steel sections for doors, windows and ventilators (second revision)
10451 : 1983 Specification for steel sliding shutters (top hung type)
10521 : 1983 Specification for collapsible gates
14856 : 2000 Specification for glass fibre reinforced (GRP) panel type door shutters for internal use
| IS No. | Title | IS No. | Title |
| 15380 : 2003 | Specification for moulded raised high density fibre (HDF) panel doors | 2215 : 1983 | Specification for starters for fluorescent lamps (third revision) |
| 2412 : 1975 | Specification for link clips for electrical wiring (first revision) | ||
| 11. ELECTRICAL WIRING FITTINGS AND ACCESSORIES | 2418 | Specification for tubular fluorescent lamps for general lighting services: | |
| 371 : 1999 | Specification for ceiling roses (third revision) | (Part 1) : 1977 | Requirements and tests (first revision) |
| 374 : 1979 | Specification for electric ceiling type fans and regulators (third revision) | (Part 2) : 1977 | Standard lamp data sheets (first revision) |
| 418 : 1978 | Specification for tungsten filament general service electric lamps (third revision) | (Part 3) : 1977 | Dimensions of G-5 and G-13 bi-pin caps (first revision) |
| 1258 : 1987 | Specification for bayonet lamp holders (third revision) | (Part 4) : 1977 | Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision) |
| 1293 : 1988 | Specification for plugs and socket-outlets rated voltage up to and including 250 V and rated current up to and including 16 amperes (second revision) | 2667 : 1988 | Specification for fittings for rigid steel conduits for electrical wiring (second revision) |
| 1534 (Part 1) : 1977 | Specification for ballasts for fluorescent lamps: Part 1 For switch start circuits (second revision) | 2675 : 1983 | Specification for enclosed distribution fuseboards and cutouts for voltages not exceeding 1 000 V (second revision) |
| 1554 (Part 1) : 1988 | PVC insulated (heavy duty) electric cables: For working voltages upto and including 1 100 V (third revision) | 3287 : 1965 | Specification for industrial lighting fittings with plastic reflectors |
| (Part 2) : 1988 | For working voltages from 3.3 kV upto and including 11 kV (second revision) | 3324 : 1982 | Specification for bi-pin lamp holders for tubular fluorescent lamps (first revision) |
| 1777 : 1978 | Specification for industrial luminaire with metal reflectors (first revision) | ||
1237 : 1980 Specification for cement concrete flooring tiles (first revision)
13801 : 1993 Specification for chequered cement concrete tiles
657 : 1982 Specification for materials for use in the manufacture of magnesium oxychloride flooring compositions (second revision)
9162 : 1979 Methods of tests for epoxy resin, hardeners and epoxy resin composition for floor topping
9197 : 1979 Specification for epoxy resin, hardness and epoxy resin compositions for floor topping
10132 : 1982 Method of test for materials for use in the preparation of magnesium oxychloride flooring composition
653 : 1992 Specification for linoleum sheets and tiles (third revision)
9704 : 1980 Methods of tests for linoleum sheets and tiles
809 : 1992 Specification for rubber flooring materials for general purposes (second revision)
1195 : 2002 Specification for bitumen mastic for flooring (third revision)
8374 : 1977 Specification for bitumen mastic, anti-static and electrically conducting grade
9510 : 1980 Specification for bitumen mastic acid resisting grade
13026 : 1991 Specification for bitumen mastic for flooring for industries handling LPG and other light hydrocarbon products
15194 : 2002 Specification for pitch-mastic flooring for industries handling
IS No. Title heavy hydrocarbon products like kerosene, diesel and furnace oil
3461 : 1980 Specification for PVC asbestos floor tiles (first revision)
3462 : 1986 Specification for unbacked flexible PVC flooring (second revision)
3464 : 1986 Methods of test for plastic flooring and wall tiles (second revision)
2333 : 1992 Specification for plaster of Paris for ceramic industry (second revision)
4457 : 1982 Specification for ceramic unglazed vitreous acid resisting tile (first revision) 13630 Method of test for ceramic tiles:
(Part 1) : 1993 Determination of dimensions and surface quality
(Part 2) : 1992 Determination of water absorption
(Part 3) : 1992 Determination of moisture expansion using boiling water — Unglazed tiles
(Part 4) : 1992 Determination of linear thermal expansion
(Part 5) : 1992 Determination of resistance to thermal shock
(Part 6) : 1993 Determination of modulus of rupture
(Part 7) : 1993 Determination of chemical resistance — Unglazed tiles
(Part 8) : 1993 Determination of chemical resistance — Glazed tiles
(Part 9) : 1993 Determination of crazing resistance — Glazed tiles
(Part 10) : 1993 Determination of frost resistance
(Part 11) : 1993 Determination of resistance to surface abrasion — Glazed tiles
(Part 12) : 1993 Determination of resistance to deep abrasion — Unglazed tiles
(Part 13) : 1993 Determination of scratch hardness of surface according to Mohs
13711 : 1993 Sampling and basis for acceptance of ceramic tiles
13753 : 1993 Specification for dust pressed ceramic tiles with water absorption of E > 10% Group (B III)
13754 : 1993 Specification for dust pressed ceramic tiles with water absorption of 6% < E < 10% Group (B II b)
IS No. Title
13755 : 1993 Specification for dust pressed ceramic tiles with water absorption of 3% < E < 6% Group (B II a)
13756 : 1993 Specification for dust pressed ceramic tiles with water absorption of E < 3% Group B I
4456 Methods of test for chemical resistant mortars:
(Part 1) : 1967 Silicate type and resin type
(Part 2) : 1967 Sulphur type
4457 : 1982 Specification for ceramic unglazed vitreous acid resisting tile (first revision)
4832 Specification for chemical resistant mortars:
(Part 1) : 1969 Silicate type
(Part 2) : 1969 Resin type
(Part 3) : 1968 Sulphur type
4860 : 1968 Specification for acid resistant bricks
277 : 1992 Specification for galvanized steel sheets (plain and corrugated (fifth revision)
459 : 1992 Specification for corrugated and semi-corrugated asbestos cement sheets (third revision)
654 : 1992 Specification for clay roofing tiles, Mangalore pattern (third revision)
1464 : 1992 Specification for clay ridge and ceiling tiles (second revision)
2690 Specification for burnt clay flat terracing tiles:
(Part 1) : 1993 Machine made (second revision)
(Part 2) : 1992 Hand-made (second revision) 3951 Specification for hollow clay tiles for floor and roofs:
(Part 1) : 1975 Filler type (first revision)
(Part 2) : 1975 Structural type (first revision)
10388 : 1982 Specification for corrugated coir wood wool cement roofing sheets
12583 : 1988 Specification for corrugated bitumen roofing sheets
12866 : 1989 Specification for plastic translucent sheets made from thermosetting polyester resin (glass fibre reinforced)
IS No. Title
13317 : 1992 Specification for clay roofing camty tiles, half round and flat tiles
1542 : 1992 Specification for sand for plaster (second revision)
4456 Methods of test for chemical resistant mortars:
(Part 1) : 1967 Silicate type and resin type
(Part 2) : 1967 Sulphur type 4832 Specification for chemical resistant mortars:
(Part 1) : 1969 Silicate type
(Part 2) : 1969 Resin type
(Part 3) : 1968 Sulphur type
15418 : 2003 Specification for finished wall papers, wall vinyls and plastic wall coverings in roll form
2553 Specification for safety glass: (Part 1) : 1990 Part 1 General purpose (third revision)
2835 : 1987 Specification for flat transparent sheet glass (third revision)
3438 : 1994 Specification for silvered glass mirrors for general purposes (second revision)
5437 : 1994 Specification for figured rolled and wired glass (first revision)
14900 : 2000 Specification for transparent float glass
2095 Specification for gypsum plaster boards:
(Part 1) : 1996 Plain gypsum plaster boards
(Part 2) : 2001 Coated/laminated gypsum plaster boards
(Part 3) : 1996 Reinforced gypsum plaster boards (second revision)
2542 Methods of test for gypsum plaster, concrete and products:
(Part 1/Sec 1) : Plaster and concrete, Section 1 1978 Normal consistency of gypsum plaster (first revision)
(Part 1/Sec 2) : Plaster and concrete, Section 2 1978 Normal consistency of gypsum concrete (first revision)
IS No. Title
(Part 1/Sec 3) : Plaster and concrete, Section 3 1978 Setting time of plaster and concrete (first revision)
(Part 1/Sec 4) : Plaster and concrete, Section 4 1978 Transverse strength of gypsum plaster (first revision)
(Part 1/Sec 5) : Plaster and concrete, Section 5 1978 Compressive strength and dry set density of gypsum plaster (first revision)
(Part 1/Sec 6) : Plaster and concrete, Section 6 1978 Soundness of gypsum plaster (first revision)
(Part 1/Sec 7) : Plaster and concrete, Section 7 1978 Mechanical resistance of gypsum plaster by dropping ball test (first revision)
(Part 1/Sec 8) : Plaster and concrete, Section 8 1978 Freedom from coarse particles (first revision)
(Part 1/Sec 9) : Plaster and concrete, Section 9 1978 Expansion of plaster (first revision)
(Part 1/Sec 10) : Plaster and concrete, Section 10 1978 Sand in set plaster (first revision)
(Part 1/Sec 11) : Plaster and concrete, Section 11 1978 Wood fibre content in gypsum plaster (first revision)
(Part 1/Sec 12) : Plaster and concrete, Section 12 1978 Dry bulk density (first revision)
(Part 2/Sec 1) : Gypsum products, Section 1 1981 Measurement of dimensions (first revision)
(Part 2/Sec 2) : Gypsum products, Section 2 1981 Determination of mass (first revision)
(Part 2/Sec 3) : Gypsum products, Section 3 1981 Determination of mass and thickness of paper surfacing (first revision)
(Part 2/Sec 4) : Gypsum products, Section 4 1981 Transverse strength (first revision)
(Part 2/Sec 5) : Gypsum products, Section 5 1981 Compressive strength (first revision)
(Part 2/Sec 6) : Gypsum products, Section 6 1981 Water absorption (first revision)
(Part 2/Sec 7) : Gypsum products: Section 7 1981 Moisture content (first revision)
(Part 2/Sec 8) : Gypsum products, Section 8 1981 Nail retention of precast reinforced gypsum slabs (first revision) 2547 Specification for gypsum building plaster:
IS No. Title
(Part 1) : 1976 Excluding premixed lightweight plaster (first revision)
(Part 2) : 1976 Premixed lightweight plaster (first revision)
2849 : 1983 Specification for non-load bearing gypsum partition blocks (solid and hollow types)
8272 : 1984 Specification for gypsum plaster or use in the manufacture of fibrous plasterboards (first revision)
9498 : 1980 Specification for inorganic aggregates for use in gypsum plaster
i) Timber Classification
399 : 1963 Classification of commercial timbers and their zonal distribution (revised)
1150 : 2000 Trade names and abbreviated symbols for timber species (third revision)
4970 : 1973 Key for identification of commercial timber (first revision)
ii) Timber Conversion and Grading
190 : 1991 Specification for coniferous sawn timber (baulks and scantlings) (fourth revision)
1326 : 1992 Specification for non-coniferous sawn timber (baulks and scantlings) (second revision)
1331 : 1971 Specification for cut sizes of timber (second revision)
3337 : 1978 Specification for ballies for general purposes (first revision)
5966 : 1993 Specification for non-coniferous timber in converted form for general purpose (first revision)
14960 : 2001 Specification for preservative treated and seasoned sawn timber from rubberwood (Hevea brasiliensis)
iii) Timber Testing
1708 Methods of testing small clear specimens of timber:
(Part 1) : 1986 Determination of moisture content (second revision)
| IS No. | Title | IS No. | Title |
| (Part 2):1986 | Determination of specific gravity (second revision) | (Part 1):1991 | Determination of copper, arsenic, chromium, zinc, boron, creosote and fuel oil (first revision) |
| (Part 3):1986 | Determination of volumetric shrinkage (second revision) | (Part 2):1991 | Determination of copper (in copper organic preservative salt) and pentachlorophenol (first revision) |
| (Part 4):1986 | Determination of radial and tangential shrinkage and fibre saturation point (second revision) | 4907:1968 | Method of testing timber connectors |
| (Part 5):1986 | Determination of static bending strength (second revision) | 8292:1992 | Methods for evaluation of working quality of timber under different wood operations — Method of test (first revision) |
| (Part 6):1986 | Determination of static bending strength under two point loading (second revision) | 8720:1978 | Methods of sampling of timber scantlings from depots and their conversion for testing |
| (Part 7):1986 | Determination of impact bending strength (second revision) | ||
| (Part 8):1986 | Determination of compressive strength parallel to grain (second revision) | 8745:1994 | Methods of presentation of data of physical and mechanical properties of timber (first revision) |
303 : 1989 Specification for plywood for general purposes (third revision)
1328 : 1996 Specification for veneered decorative plywood (third revision) 1734 Method of test for plywood:
(Part 1) : 1983 Determination of density and moisture content (second revision)
(Part 2) : 1983 Determination of resistance of dry heat (second revision)
(Part 3) : 1983 Determination of fire resistance (second revision)
(Part 4) : 1983 Determination of glue shear strength (second revision)
(Part 5) : 1983 Test for adhesion of plies (second revision)
(Part 6) : 1983 Determination of water resistance (second revision)
(Part 7) : 1983 Mycological test (second revision)
(Part 8) : 1983 Determination of pH value (second revision)
(Part 9) : 1983 Determination of tensile strength (second revision)
(Part 10 : 1983 Determination of compressive strength (second revision)
(Part 11) : 1983 Determination of static bending strength (second revision)
(Part 12) : 1983 Determination of scarf joint strength (second revision)
(Part 13) : 1983 Determination of panel shear strength (second revision)
(Part 14) : 1983 Determination of plate shear strength (second revision)
(Part 15) : 1983 Central loading of plate test (second revision)
(Part 16) : 1983 Vibration of plywood plate test (second revision)
(Part 17) : 1983 Long time loading test of plywood strips (second revision)
(Part 18) : 1983 Impact resistance test on the surface of plywood (second revision)
(Part 19) : 1983 Determination of nails and screws holding power (second revision)
IS No. Title
(Part 20) : 1983 Acidity and alkalinity resistance test (second revision)
4990 : 1993 Specification for plywood for concrete shuttering work (second revision)
5509 : 2000 Specification for fire retardant plywood (second revision)
5539 : 1969 Specification for preservative treated plywood
7316 : 1974 Specification for decorative plywood using plurality of veneers for decorative faces
10701 : 1983 Specification for structural plywood
ii) Blockboards, Particle Boards and Fibre Boards
1658 : 1977 Specification for fibre hardboards (second revision)
1659 : 1990 Specification for block boards (third revision)
2380 Methods of test for wood particle boards and boards from other lignocellulosic materials:
(Part 1) : 1977 Preparation and conditioning of test specimens (first revision)
(Part 2) : 1977 Accuracy of dimensions of boards (first revision)
(Part 3) : 1977 Determination of moisture content and density (first revision)
(Part 4) : 1977 Determination of static bending strength (first revision)
811 : 1987 Specification for cold formed light gauge structural steel sections (revised)
1173 : 1978 Specification for hot rolled and slit steel tee bars (second revision)
1852 : 1985 Specification for rolling and cutting tolerances for hot rolled steel products (fourth revision)
2314 : 1986 Specification for steel sheet piling sections (first revision)
3443 : 1980 Specification for crane rail sections (first revision)
3908 : 1986 Specification for aluminium equal leg angles (first revision)
3909 : 1986 Specification for aluminium unequal leg angles (first revision)
3921 : 1985 Specification for aluminium channels (first revision)
3954 : 1991 Specification for hot rolled steel channels sections for general engineering purposes (first revision)
3964 : 1980 Specification for light rails (first revision)
5384 : 1985 Specification for aluminium I-beams (first revision)
6445 : 1985 Specification for aluminium tee sections (first revision)
12779 : 1989 Rolling and cutting tolerances for hot rolled parallel flange beam and column sections
808 : 1989 Dimensions for hot rolled steel beam, column channel and angle sections (third revision)
1730 : 1989 Dimensions for steel plates, sheets strips and flats for general engineering purposes (second revision)
1732 : 1989 Dimensions for round and square steel bars for structural and general engineering purposes (second revision)
2525 : 1982 Dimensions for wrought aluminium and aluminium alloy wire (first revision)
2591 : 1982 Dimensions for hot rolled steel bars for threaded components (second revision)
2673 : 2002 Dimensions for wrought aluminium and aluminium alloys, extruded round tube (second revision)
2676 : 1981 Dimensions for wrought aluminium and aluminium alloys, sheet and strip (first revision)
| IS No. | Title | IS No. | Title |
| 2677 : 1979 | Dimensions for wrought aluminium and aluminium alloys, plates and hot rolled sheets (first revision) | 9403 : 1980 | Method of test for thermal conductance and transmittance of built up sections by means of guarded hot box |
| 2678 : 1987 | Dimensions and tolerances for wrought aluminium and aluminium alloys, drawn round tubes (second revision) | 9489 : 1980 | Method of test for thermal conductivity of materials by means of heat flow meter |
| 3577 : 1992 | Dimensions and tolerances for wrought aluminium and aluminium alloys rivet, bolt and screw stock (first revision) | 9490 : 1980 | Method of determination for thermal conductivity of insulation materials (water calorimeter method) |
| 3965 : 1981 | Dimensions for wrought aluminium and aluminium alloys, bar, rod and section (first revision) | 9742 : 1993 | Specification for sprayed mineral wool thermal insulation (first revision) |
| 6477 : 1983 | Dimensions for wrought aluminium and aluminium alloys, extruded hollow sections | 9743 : 1990 | Specification for thermal insulation finishing cements (first revision) |
| 12778 : 1989 | Dimensions for hot rolled steel parallel flange beam and column sections | 9842 : 1994 | Specification for preformed fibrous pipe insulation (first revision) |
| 11128 : 1994 | Specification for spray applied hydrated calcium silicate thermal insulation | ||
| 24. THERMAL INSULATION MATERIALS | |||
| 3144 : 1992 | Methods of test for mineral wool thermal insulation material (second revision) | 11129 : 1984 | Method of test for tumbling friability of preformed block-type thermal insulation |
| 3346 : 1980 | Methods for the determination of thermal conductivity of thermal insulation materials (two slab, guarded hot-plate method) (first revision) | 11239 | Method of test for rigid cellular thermal insulation materials: |
| (Part 1) : 1985 | Dimensions | ||
| (Part 2) : 1985 | Apparent density | ||
| (Part 3) : 1985 | Dimensional stability | ||
| 3677 : 1985 | Specification for unbonded rock and slag wool for thermal insulation (second revision) | (Part 4) : 1985 | Water vapour transmission rate |
| (Part 5) : 1985 | Volume percent of open and closed cells | ||
| 4671 : 1984 | Specification for expanded polystyrene for thermal insulation purposes (first revision) | (Part 6) : 1985 | Heat distortion temperature |
| (Part 7) : 1985 | Coefficient of linear thermal expansion at low temperatures | ||
| 5688 : 1982 | Methods of test for preformed block-type and pipe-covering type thermal insulation (first revision) | (Part 8) : 1985 | Flame height, time of burning and loss of mass |
| 5724 : 1970 | Methods of test for thermal insulating cement | (Part 9) : 1985 | Water absorption |
| (Part 10) : 1985 | Flexural strength | ||
| 6598 : 1972 | Specification for cellular concrete for thermal insulation | (Part 11) : 1985 | Compressive strength |
| (Part 12) : 1989 | Horizontal burning characteristics | ||
| 7509 : 1993 | Specification for thermal insulating cement (first revision) | (Part 13) : 1992 | Determination of flammability by oxygen index |
| 8154 : 1993 | Specification for preformed calcium silicate insulation for temperature up to 650°C) (first revision) | 11307 : 1985 | Specification for cellular glass block and pipe thermal insulating |
| 8183 : 1993 | Specification for bonded mineral wool (first revision) | 11308 : 1985 | Specification for thermal insulating castables (hydraulic setting) for temperatures up to 1 250°C |
IS No. Title
12436 : 1988 Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (Pir) foams for thermal insulation
13204 : 1991 Specification for rigid phenolic foams for thermal insulation
13286 : 1992 Methods of test for surface spread of flame for thermal insulation materials
207 : 1964 Specification for gate and shutter hooks and eyes (revised)
451 : 1999 Specification for technical supply conditions for wood screws (third revision)
554 : 1999 Specification for pipe threads where pressure-tide joints are made on the threads — Dimensions, tolerances and designation (fourth revision)
723 : 1972 Specification for steel countersunk head wire nails (second revision)
724 : 1964 Specification for mild steel and brass cup, ruler and square hooks and screw eyes (revised)
725 : 1961 Specification for copper wire nails (revised)
730 : 1978 Specification for hook bolts for corrugated sheet roofing (second revision)
1120 : 1975 Specification for coach screws (first revision)
1363 Specification for hexagon head bolts, screws and nuts of product grade C:
(Part 1) : 2002 Hexagon head bolts (size range M5 to M64) (fourth revision)
(Part 2) : 2002 Hexagon head screws (size range M5 to M64) (fourth revision)
(Part 3) : 2002 Part 3 Hexagon nuts (Size range M5 to M64) (fourth revision)
1364 Specification for hexagon head bolts, screws and nuts of product Grades A and B:
(Part 1) : 2002 Hexagon head bolts (size range M1.6 to M64) (fourth revision)
(Part 2) : 2002 Hexagon head screws (size range M1.6 to M64) (fourth revision)
IS No. Title
(Part 3) : 2002 Hexagon nuts (size range M1.6 to M64) (fourth revision)
(Part 4) : 2003 Hexagon thin nuts (chamfered) (size range M1.6 to M64) (fourth revision)
(Part 5) : 2002 Hexagon thin nuts (unchamfered) (size range M1.6 to M10) (fourth revision)
(Part 6) : 2002 Hexagon nuts, style 2
1365 : 1978 Specification for slotted countersunk head screws (third revision)
1366 : 2002 Specification for slotted cheese head screws (third revision)
1367 Specification for technical supply conditions for threaded steel fasteners:
(Part 1) : 2002 Introduction and general information (third revision)
(Part 2) : 2002 Product grades and tolerances (third revision)
(Part 3) : 2002 Mechanical properties and test methods for bolts, screws and studs with full loadability (fourth revision)
(Part 5) : 2002 Mechanical properties and test methods for set screws and similar threaded fasteners not under tensile stresses (third revision)
(Part 6) : 1994 Mechanical properties and test methods for nuts with specified proof loads (third revision)
(Part 7) : 1980 Mechanical properties and test methods for nuts without specified proof loads (second revision)
(Part 8) : 2002 Mechanical and performance properties for prevailing torque type steel hexagon nuts (third revision)
(Part 9/Sec 1) : Surface discontinuities, Section 1 1993 Bolts, screws and studs for general applications (third revision)
(Part 9/Sec 2) : Surface discontinuities, Section 2 1993 Bolts, screws and studs for special applications (third revision)
(Part 10) : 2002 Surface discontinuities on nuts (third revision)
(Part 11) : 2002 Electroplated coatings (third revision)
(Part 12) : 1981 Phosphate coatings on threaded fasteners (second revision)
| IS No. | Title | IS No. | Title |
| (Part 13): 1983 | Hot dip galvanized coatings on threaded fasteners (second revision) | 4206: 1987 | Dimensions for nominal lengths, and thread lengths for bolts, screws and studs (first revision) |
| (Part 14/Sec 1): 2002 | Mechanical properties of corrosion resistance stainless steel fasteners, Section 1 Bolts, screws and studs (third revision) | 4762: 2002 | Specification for worm drive hose clips for general purposes (second revision) |
| (Part 14/Sec 2): 2002 | Mechanical properties of corrosion resistance stainless steel fasteners, Section 2 Nuts (third revision) | 5369: 1975 | General requirements for plain washers and lock washers (first revision) |
| (Part 14/Sec 3): 2002 | Mechanical properties of corrosion resistance stainless steel fasteners, Section 3 Set screws and similar fasteners not under tensile stress (third revision) | 5372: 1975 | Specification for taper washer for channels (ISMC) (first revision) |
| 5373: 1969 | Specification for square washers for wood fastenings | ||
| 5374: 1975 | Specification for taper washers for L-beam (ISMB) (first revision) | ||
| (Part 16): 2002 | Designation system and symbols (third revision) | 5624: 1993 | Specification for foundation bolts (first revision) |
| 1929: 1982 | Specification for hot forged steel rivets for hot closing (12 to 36 mm diameter) (first revision) | 6113: 1970 | Specification for aluminium fasteners for building purposes |
| 2016: 1967 | Specification for plain washers (first revision) | 6610: 1972 | Specification for heavy washers for steel structures |
| 2155: 1982 | Specification for cold forged solid steel rivets for hot closing (6 to 16 mm diameter) (first revision) | 6623: 1985 | Specification for high strength structural nuts (first revision) |
| 2585: 1968 | Specification for black square bolts and nuts (dia range 6 to 39 mm) and black square screws (dia range 6 to 24 mm) (first revision) | 6639: 1972 | Specification for hexagon bolts for steel structures |
| 2643: 1999 | Dimensions, tolerances and designation for pipe threads where pressure-tight joints are not made on the threads (second revision) | 6649: 1985 | Specification for hardened and tempered washers for high strength structural bolts and nuts (first revision) |
IS No. Title
10238 : 2001 Specification for step bolts for steel structures
12427 : 2001 Specification for transmission tower bolts
427 : 1965 Specification for distemper, dry, colour as required (revised)
428 : 2000 Specification for distemper, washable (second revision)
5410 : 1992 Specification for cement paint, colour as required (first revision)
5411 Specification for plastic emulsion paint:
(Part 1) : 1974 For interior use (first revision)
(Part 2) : 1972 For exterior use
101 Methods of sampling and test for paints, varnishes and related products:
(Part 1/Sec 1) : Test on liquid paints (general 1986 and physical), Section 1 Sampling (third revision)
(Part 1/Sec 2) : Test on liquid paints (general 1987 and physical), Section 2 Preliminary examination and preparation of samples for testing (third revision)
(Part 1/Sec 3) : Test on liquid paints (general and 1986 physical), Section 3 Preparation of panels (third revision)
(Part 1/Sec 4) : Test on liquid paints (general and 1987 physical), Section 4 Brushing test (third revision)
(Part 1/Sec 5) : Test on liquid paints (general and 1989 physical), Section 5 Consistency (third revision)
(Part 1/Sec 6) : Test on liquid paints (general and 1987 physical), Section 6 Flash point (third revision)
IS No. Title
(Part 1/Sec 7) : Test on liquid paints (general and 1987 physical), Section 7 Mass per 10 litres (third revision)
(Part 2/Sec 1) : Test on liquid paints (chemical 1988 examination), Section 1 Water content (third revision)
(Part 2/Sec 2) : Test on liquid paints (chemical 1986 examination), Section 2 Volatile matter (third revision)
(Part 3/Sec 1) : Tests on paint film formation, 1986 Section 1 Drying time (third revision)
(Part 3/Sec 2) : Tests on paint film formation, 1989 Section 2 Film thickness (third revision)
(Part 3/Sec 4) : Tests on paint film formation, 1987 Section 4 Finish (third revision)
(Part 3/Sec 5) : Tests on paint film formation, 1987 Section 5 Fineness of grind (third revision)
(Part 4/Sec 1) : Optical test, Section 1 Opacity 1988 (third revision)
(Part 4/Sec 2) : Optical test, Section 2 Colour 1989 (third revision)
(Part 4/Sec 3) : Optical test, Section 3 Light 1988 fastness test (third revision)
(Part 4/Sec 4) : Optical test, Section 4 Gloss (third 1986 revision)
(Part 5/Sec 1) : Mechanical test on paint films, 1988 Section 1 Hardness tests (third revision)
(Part 5/Sec 2) : Mechanical test on paint films, 1988 Section 2 Flexibility and adhesion (third revision)
(Part 5/Sec 3) : Mechanical test on paint films, 1986 Section 3 Impact resistance (fourth revision)
(Part 5/Sec 4) : Mechanical test on paint films, 1986 Section 4 Print free test (third revision)
(Part 6/Sec 1) : Durability tests, Section 1 1988 Resistance to humidity under conditions of condensation (third revision)
(Part 6/Sec 2) : Durability tests, Section 2 Keeping 1989 properties (third revision)
(Part 6/Sec 3) : Durability tests, Section 3 Moisture 1990 vapour permeability (third revision)
| IS No. | Title | IS No. | Title |
|---|---|---|---|
| (Part 6/Sec 4):1991 | Durability tests, Section 4 Degradation of coatings (pictorial aids for evaluation) | 133:1993 | Specification for enamel, interior (a) undercoating, (b) finishing (third revision) |
| (Part 6/Sec 5):1997 | Durability tests, Section 5 Accelerated weathering test (third revision) | 137:1965 | Specification for ready mixed paint, brushing, matt or egg-shell flat, finishing, interior, to Indian Standard colour, as required (revised) |
| (Part 7/Sec 1):1989 | Environmental tests on paint films, Section 1 Resistance to water (third revision) | 158:1981 | Specification for ready mixed paint, brushing, bituminous, black, lead-free, acid, alkali, and heat resisting (third revision) |
| (Part 7/Sec 2):1990 | Environmental tests on paint films, Section 2 Resistance to liquids (third revision) | ||
| (Part 7/Sec 3):1990 | Environmental tests on paint films, Section 3 Resistance to heat (third revision) | 168:1993 | Specification for ready mixed paint, air-drying semi-glossy/matt, for general purposes (third revision) |
| (Part 7/Sec 4):1990 | Environmental tests on paint films, Section 4 Resistance to bleeding of pigments (third revision) | 341:1973 | Specification for black Japan, Types A, B and C (first revision) |
| (Part 8/Sec 1):1989 | Tests for pigments and other solids, Section 1 Residue on sieve (third revision) | 2074:1992 | Specification for ready mixed paint, air drying red oxide-zinc chrome, priming (second revision) |
| (Part 8/Sec 2):1990 | Tests for pigments and other solids, Section 2 Pigments and non-volatile matter (third revision) | 2075:2000 | Specification for ready mixed paint, stoving, red oxide-zinc chrome, priming (second revision) |
| (Part 8/Sec 3):1993 | Tests for pigments and other solids, Section 3 Ash content | 2339:1963 | Specification for aluminium paint for general purposes, in dual container |
| (Part 8/Sec 4):1993 | Tests for pigments and other solids, Section 4 Phthalic anhydride | 2932:2003 | Specification for enamel, synthetic, exterior, (a) undercoating, (b) finishing (third revision) |
| (Part 8/Sec 5):1993 | Tests for pigments and other solids, Section 5 Lead restriction test (third revision) | 2933:1975 | Specification for enamel, exterior, (a) undercoating, (b) finishing (first revision) |
| IS No. | Title | IS No. | Title |
| 14293 : 1995 | Method of test for trapezoid tearing — Geotextiles | 5219 (Part 1) : 1969 | Specification for cast copper alloy traps: Part 1 'P' and 'S' traps |
| 14294 : 1995 | Method of determination of apparent opening size by dry sieving technique — Geotextiles | 5455 : 1969 | Specification for cast-iron steps for manholes |
| 14324 : 1995 | Method of test for determination of water permeability-permittivity — Geotextiles | 6411 : 1985 | Specification for gel-coated glass fibre reinforced polyester resin bath tubs (first revision) |
| 14443 : 1997 | Specification for polycarbonate sheets | 8718 : 1978 | Specification for vitreous enamelled steel kitchen sinks |
| 14643 : 1999 | Specification for unsintered polytetrafluoroethylene (PTFE) tape for thread sealing applications | 8727 : 1978 | Specification for vitreous enamelled steel wash basins |
| 14706 : 1999 | Sampling and preparation of test specimen of geotextiles | 9140 : 1996 | Method of sampling of vitreous and fire clay sanitary appliances (second revision) |
| 14714 : 1999 | Determination of abrasion resistance of geotextiles | 12701 : 1996 | Specification for rotational moulded polyethylene water storage tanks (first revision) |
| 14715 : 2000 | Specification for woven jute geotextiles | 13983 : 1994 | Specification for stainless steel sinks for domestic purposes |
| 14716 : 1999 | Determination of mass per unit area of geotextiles | 14399 | Hot press moulded thermosetting glass fibre reinforced (GRP) sectional water storage tanks: |
| 14739 : 1999 | Methods for determination of creep of geotextiles | (Part 1) : 1996 | Specification for panels |
| 14753 : 1999 | Specification for poly (methyl) methacrylate (PMMA) (Acrylic) sheets | (Part 2) : 1996 | Guidelines for assembly, installation and testing |
| 14986 : 2001 | Jute geo-grid for rain water erosion control in road and railway embankments and hill slopes | b) Pipes and Fittings Excluding Valves | b) Pipes and Fittings Excluding Valves |
| 14986 : 2001 | Jute geo-grid for rain water erosion control in road and railway embankments and hill slopes | i) Brass and Copper Pipes and Fittings | i) Brass and Copper Pipes and Fittings |
| IS No. | Title | IS No. | Title |
| (Part 2): 2003 | Specific requirements for 90° bends (first revision) | 12235 | Methods of test for unplasticized PVC pipes for potable water supplies: |
| (Part 3): 2003 | Specific requirements for 90° tees | ||
| (Part 4): 2003 | Specific requirements for reducers | (Part 1): 1986 | Method of measurement of outside diameter |
| (Part 5): 2003 | Specific requirements for ferrule reducers (first revision) | (Part 2): 1986 | Measurement of wall thickness |
| (Part 6): 2003 | Specific requirements for pipe ends | (Part 3): 1986 | Test for opacity |
| (Part 7): 2003 | Specific requirements for sandwich flanges | (Part 4): 1986 | Determining the detrimental effect on the composition of water |
| (Part 8): 2003 | Specific requirements for reducing tests | (Part 5): 1986 | Reversion test |
| (Part 9): 2003 | Specific requirements for end caps (first revision) | (Part 6): 1986 | Stress relief test |
| 8360 | Specification for fabricated high density polyethelene (HDPE) fittings for potable water supplies: | (Part 7): 1986 | Test for resistance to sulphuric acid |
| (Part 8): 1986 | Internal hydrostatic pressure test | ||
| (Part 9): 1986 | Impact strength test | ||
| (Part 10): 1986 | Method for determination of organotin as tin aqueous solution | ||
| (Part 1): 1977 | General requirements | (Part 11): 1986 | Extractability of cadmium and mercury occurring as impurities |
| (Part 2): 1977 | Specific requirements for 90° tees | ||
| (Part 3): 1977 | Specific requirements for 90° bends | 12709: 1994 | Specification for glass-fibre reinforced plastic (GRP) pipes joints and fittings for use for potable water supply (first revision) |
| 10124 | Specification for fabricated PVC fittings for potable water supplies: | ||
| (Part 1): 1988 | General requirements (first revision) | 12818: 1992 | Specification for unplasticized PVC screen and casing pipes for bore/tubewell (first revision) |
| (Part 2): 1988 | Specific requirements for sockets (first revision) |
IS No. Title
vi) Steel Tubes, Pipes and Fittings 1239 Mild steel tubes, tubular and other wrought steel fittings: (Part 1) : 1990 Mild steel tubes (fifth revision)
(Part 2): 1992 Mild steel tubular and other wrought steel pipe fittings (third revision)
3589:1991 Specification for seamless or electrically welded steel pipes for water, gas and sewage (168.3 to 2 032 mm outside size) (second revision)
4270:1992 Steel tubes used for water wells (second revision)
5504:1997 Specification for spiral welded pipes (first revision)
6286:1979 Seamless and welded steel pipe for sub-zero temperature service
6392: 1971 Steel pipe flanges
vii) Stoneware Pipes and Fittings
651: 1992 Specification for salt-glazed stoneware pipes and fittings (fifth revision)
3006:1979 Specification for chemically resistant glazed stoneware pipes and fittings (first revision)
viii) Asbestos Cement Pipes [See 8 (a) (ii) under the category Composite Matrix Products']
ix) Concrete Pipes and Pipes Lined/Coated with Concrete or Mortar [See 8 (a) (iv) under the category 'Composite Matrix Products']
771 Specification for glazed fire clay sanitary appliances:
(Part 1) : 1979 General requirements (second revision)
(Part 2) : 1985 Specific requirements of kitchen and laboratory sinks (third revision)
(Part 3/Sec 1) : Specific requirements of urinals, 1979 Section 1 Slab urinals (second revision)
(Part 3/Sec 2) : Part 3Specific requirements of 1985 urinals, Section 2 Stall urinals (third revision)
IS No. Title
(Part 4) : 1979 Specific requirements of post mortom slabs (second revision)
(Part 5) : 1979 Specific requirements of shower trays (second revision)
(Part 6) : 1979 Specific requirements of bed-pan sinks (second revision)
(Part 7):1981 Specific requirements of slop sinks (second revision)
772:1973 Specification for general requirements of enamelled cast iron sanitary appliances (second revision)
773:1988 Specification for enamelled cast iron water-closets railway stock type (fourth revision)
774:1984 Specification for flushing cisterns for water-closets and urinals (other than plastic cisterns) (fourth revision)
1726:1991 Specification for cast iron manhole covers and frames (third revision)
2326:1987 Specification for automatic flushing cisterns for urinals (second revision)
2548 Specification for plastic seats and covers for water-closets:
(Part 1) : 1996 Thermoset seats and covers (fifth revision)
(Part 2) : 1996 Thermoplastic seats and covers (fifth revision) 2556 Specification for vitreous sanitary appliances (vitreous china):
(Part 1): 1994 General requirements (third revision)
(Part 2) : 1994 Specific requirements of washdown water-closets (fourth revision)
(Part 3) : 1994 Specific requirements of squatting pans (fourth revision)
(Part 4) : 1994 Specific requirementsof wash basins (third revision)
(Part 5) : 1994 Specific requirements of laboratory sinks (third revision)
(Part 6) : 1995 Specific requirements of urinals and partition plates (fourth revision)
(Part 7) : 1995 Specific requirements of accessories for sanitary appliances (third revision)
(Part 8) : 1995 Specific requirements of siphonic wash-down water closets (fourth revision)
| IS No. | Title | IS No. | Title |
| (Part 9):1995 | Specific requirements of bidets (fourth revision) | 3950:1979 | Specification for surface boxes for sluice valves (first revision) |
| (Part 14):1995 | Specific requirements of integrated squatting pans (first revision) |
1725 : 1982 Specification for soil-based blocks used in general building construction
1030 : 1998 Carbon steel castings for general engineering purposes (fifth revision)
1136 : 1990 Preferred sizes for wrought metal products (first revision)
1137 : 1990 Thickness of sheet and diameters of wire (first revision)
1762 (Part 1) : Code for designation of steels: 1974 Part 1 Based on letter symbols (first revision)
2049 : 1978 Colour code for the identification of wrought steel for general engineering purposes (first revision)
2644 : 1994 High tensile steel castings (fourth revision)
7598 : 1990 Classification of steels (first revision)
1977 : 1996 Specification for low tensile structural steels (third revision)
2062 : 1999 Specification for steel for general structural purposes (fifth revision)
2830 : 1992 Specification for carbon steel billets ingots, blooms and slabs for re-rolling into steel for general structural purposes (second revision)
2831 : 2000 Specification for carbon steel billets ingots, blooms and slabs for re-rolling into low tensile structural steel (third revision)
8053 : 1976 Specification for steel ingots and billets for the production of steel wire for the manufacture of wood screws
IS No. Title
8500 : 1991 Specification for structural steels microalloyed (medium and high strength qualities)
8952 : 1995 Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes (first revision)
9467 : 1980 Steel ingots and billets for production of rivet bars for structural purposes
277 : 2003 Specification for galvanized steel sheets (plain and corrugated) (sixth revision)
412 : 1975 Specification for expanded metal steel sheets for general purposes (second revision)
513 : 1994 Specification for cold rolled low carbon steel sheets and strips (fourth revision)
1079 : 1994 Specification for hot rolled carbon steel sheet and strip (fifth revision)
6911 : 1992 Stainless steel plate, sheet and strip (first revision)
7226 : 1974 Specification for cold rolled medium, high carbon and low alloy steel strip for general engineering purposes
11587 : 1986 Specification for structural weather resistant steels
14246 : 1995 Specification for continuously pre-painted galvanized steel sheets and coils
15103 : 2002 Specification for fire resistant steel
280 : 1978 Specification for mild steel wire for general engineering purposes (third revision)
1148 : 1982 Specification for hot rolled steel rivet bars (up to 40 mm diameter) for structural purposes (third revision)
1149 : 1982 Specification for high tensile steel rivet bars for structural purposes (third revision)
1673 : 1984 Specification for mild steel wire cold heading quality (second revision)
| IS No. | Title | IS No. | Title |
| 1812 : 1982 | Specification for carbon steel wire for the manufacture of wood screw (second revision) | 1122 : 1974 | Method of test for determination of true specific gravity of natural building stones (first revision) |
| 1835 : 1976 | Specification for round steel wire for ropes (third revision) | 1123 : 1975 | Method of identification of natural building stones (first revision) |
| 2591 : 1982 | Dimensions for hot rolled bars for threaded components (second revision) | 1124 : 1974 | Method of test for determination of water absorption, apparent specific gravity and porosity of natural building stones (first revision) |
| 3150 : 1982 | Specification for hexagonal wire netting for general purposes | 1125 : 1974 | Method of test for determination of weathering of natural building stones (first revision) |
| 4826 : 1979 | Specification for hot-dipped galvanized coatings on round steel wires (first revision) | 1126 : 1974 | Method of test for determination of durability of natural building stones (first revision) |
| 6527 : 1995 | Stainless steel wire rod (first revision) | ||
| 6528 : 1995 | Specification for stainless steel wire (first revision) | 1127 : 1970 | Recommendations for dimensions and workmanship of natural building stones for masonry work (first revision) |
| 6603 : 2001 | Specification for stainless steel bars and flats (first revision) | ||
| 7887 : 1992 | Specification for mild steel wire rods for general engineering purposes (first revision) | 1128 : 1974 | Specification for limestone (slab and tiles) (first revision) |
| 10631 : 1983 | Stainless steel for welding electrode core wire | 1129 : 1972 | Recommendation for dressing of natural building stones (first revision) |
| e) Plates | 1130 : 1969 | Specification for marble (blocks, slabs and tiles) |
(Part 1/Sec 3) : Gujarat state, Section 3 Engineering 1975 properties of stone aggregates
(Part 2/Sec 1) : Maharashtra state, Section 1 1979 Availability of stones
(Part 2/Sec 2) : Maharashtra state, Section 2 1979 Engineering properties of building stones
(Part 2/Sec 3) : Maharashtra state, Section 3 1979 Engineering properties of stone aggregates
(Part 3/Sec 2) : Tamil Nadu state, Section 2 1990 Engineering properties of building stones
(Part 3/Sec 3) : Tamil Nadu state, Section 3 1980 Engineering properties of stone aggregates
(Part 4/Sec 1 Karnataka state, Sections to 3) : 1996 (1 to 3)
(Part 5/Sec 1) : Andhra Pradesh, Section 1 1997 Availability of stones
(Part 5/Sec 2) : Andhra Pradesh, Section 2 1997 Engineering properties of building stones
(Part 5/Sec 3) : Andhra Pradesh, Section 3 1997 Engineering properties of stone aggregates 9394 : 1979 Specification for stone lintels
14223 (Part 1) : Specification for polished building 1994 stones: Part 1 Granite
| 14268: 1995 | Specification for uncoated stress relieved low relaxation seven ply strand for prestressed concrete | 6523: 1983 | Specification for precast reinforced concrete door and window frames (first revision) |
| 8. COMPOSITE MATRIX PRODUCTS | 9872: 1981 | Specification for precast concrete septic tanks | |
| a) Cement Matrix Products | 9893: 1981 | Specification for precast concrete blocks for lintels and sills | |
| i) Precast Concrete Products | |||
| 2185 | Specification for concrete masonry units: | 12440: 1988 | Specification for precast concrete stone masonry blocks |
| (Part 1): 1979 | Hollow and solid concrete blocks (second revision) | 12592: 2002 | Specification for precast concrete manhole covers and frames (first revision) |
| (Part 2): 1983 | Hollow and solid lightweight concrete blocks (first revision) | 13356: 1992 | Specification for precast ferrocement water tanks (250 to 10 000 litres capacity) |
| (Part 3): 1984 | Autoclaved cellular (aerated) concrete blocks (first revision) | 13990: 1994 | Specification for precast reinforced concrete planks and joists for flooring and roofing |
| 4996: 1984 | Specification for reinforced concrete fence posts (first revision) |
| 5751: 1984 | Specification for precast concrete coping blocks (first revision) | 14143: 1994 | Specification for prefabricated brick panel and partially precast concrete joist for flooring and roofing |
| 5758: 1984 | Specification for precast concrete kerbs (first revision) |
| 5820: 1970 | Specification for precast concrete cable covers | 14201: 1994 | Specification for precast reinforced concrete channel unit for construction of floors and roofs |
| 6072: 1971 | Specification for autoclaved reinforced cellular concrete wall slabs | 14241: !994 | Specification for precast L-Panel units for roofing |
IS No. Title
ii) Asbestos Fibre Cement Products
459 : 1992 Specification for corrugated and semi-corrugated asbestos cement sheets (third revision)
1592 : 2003 Specification for asbestos cement pressure pipes and joints (fourth revision)
1626 Specification for asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fittings:
(Part 1) : 1994 Pipes and pipe fittings (second revision)
(Part 2) : 1994 Gutters and gutter fittings (second revision)
(Part 3) : 1994 Roofing fittings (second revision)
2096 : 1992 Specification for asbestos cement flat sheets (first revision)
2098 : 1997 Specification for asbestos cement building boards (first revision)
5913 : 2003 Methods of test for asbestos cement products (second revision)
6908 : 1991 Specification for asbestos cement pipes and fittings for sewerage and drainage (first revision)
7639 : 1975 Method of sampling asbestos cement products
9627 : 1980 Specification for asbestos cement pressure pipes (light duty)
13000 : 1990 Silica-asbestos-cement flat sheets — Specification
13008 : 1990 Specification for shallow corrugated asbestos cement sheets
| Specification for ball catches for use in wooden almirah |
| 2681 : 1993 | Specification for non-ferrous metal sliding door bolts for use with padlocks (third revision) | 8760 : 1978 | Specification for mortice sliding door locks, with lever mechanism |
| 9106 : 1979 | Specification for rising butt hinges |
| 3564 : 1995 | Specification for door closers (hydraulically regulated) (second revision) | 9131 : 1979 | Specification for rim locks |
| 9460 : 1980 | Specification for flush drop handle for drawer |
| 3818 : 1992 | Specification for continuous (piano) hinges (third revision) | 9899 : 1981 | Specification for hat coat and wardrobe hooks |
| 3828 : 1966 | Specification for ventilator chains | 10019 : 1981 | Specification for mild steel stays and fasteners |
| 3843 : 1995 | Specification for steel backflap hinges (first revision) | 10090 : 1982 | Specification for numericals |
| 3847 : 1992 | Specification for mortice night latches (first revision) | 10342 : 1982 | Specification for curtain rail system |
| 12817 : 1997 | Specification for stainless steel butt hinges (first revision) |
| 4621 : 1975 | Specification for indicating bolts for use in public baths and lavatories (first revision) | 12867 : 1989 | Specification for PVC hand rails covers |
| 4948 : 2002 | Specification for welded steel wire fabric for general use (second revision) | 14912 : 2001 | Specification for door closers concealed type (hydraulically regulated) |
| 3419 : 1989 |
| Specification for fittings for rigid non-metallic conduits (second revision) |
| 2086 : 1993 | Specification for carriers and bases used in re-wirable type electric fuses up to 650 V (third revision) | 3480 : 1966 | Specification for flexible steel conduits for electrical wiring |
| 2148 : 2004 | Specification for flameproof enclosures “d” for electrical apparatus for explosive gas atmospheres (third revision) | 3528 : 1966 | Specification for waterproof electric lighting fittings |
| 2206 | Specification for flameproof electric lighting fittings: Well glass and bulkhead types (first revision) | 3553 : 1966 | Specification for watertight electric lighting fittings |
| (Part 1) : 1984 | Fittings using glass tubes | 3837 : 1976 | Specification for accessories for rigid steel conduits for electrical wiring (first revision) |
| (Part 2) : 1976 | Fittings using fluorescent lamps and plastic covers | 3854 : 1997 | Specification for switches for domestic and similar purposes (second revision) |
| (Part 3) : 1989 | Fittings using fluorescent lamps and plastic covers | 4012 : 1967 | Specification for dust-proof electric lighting fittings |
| (Part 4) : 1987 | Portable flame-proof handlamps and approved flexible cables | 4013 : 1967 | Specification for dust-tight electric lighting fittings |
| IS No. | Title | IS No. | Title |
| 4160 : 1967 | Specification for interlocking switch socket outlet | (Part 5/Sec 5) : 1987 | Particular requirements, Section 5 Flood light |
| 4615 : 1968 | Specification for switch socket outlets (non-interlocking type) | 11037 : 1984 | Electronic type fan regulators |
| 13010 : 2002 | AC watt-hour meters, Class 0.5, 1 and 2 (first revision) | ||
| 4649 : 1968 | Specification for adaptors for flexible steel conduits | 13779 : 1999 | AC static watthour meters (Class 1 and 2) (first revision) |
| 5077 : 1969 | Specification for decorative lighting outfits | 13947 | Specification for low-voltage switchgear and controlgear: Part 3 Switches, disconnectors, switch disconnectors and fuse combination units |
| 6538 : 1971 | Specification for three-pin plugs made of resilient material | (Part 3) : 1993 | |
| 8030 : 1976 | Specification for luminaires for hospitals | ||
| 8828 : 1996 | Specification for circuit-breakers for over current protection for household and similar installation (second revision) | 14763 : 2000 | Conduit for electrical purposes, outside diameters of conduits for electrical installations and threads for conduits and fittings |
| 9537 | Specification for conduits for electrical installations: | 14768 | Conduit fittings for electrical installations: |
| (Part 1) : 1980 | General requirements | (Part 1) : 2000 | General requirements |
| (Part 2) : 1981 | Rigid steel conduits | (Part 2) : 2003 | Metal conduit fittings |
| (Part 3) : 1983 | Rigid plain conduits for insulating materials | 14772 : 2000 | Enclosures for accessories for household and similar fixed electrical installations |
| (Part 4) : 1983 | Pliable self-recovering conduits for insulating materials | 14927 | Cable trunking and ducting systems for electrical installations |
| (Part 5) : 2000 | Pliable conduits of insulating materials | (Part 1) : 2001 | General requirements |
| (Part 6) : 2000 | Pliable conduits of metal or composite materials | (Part 2) : 2001 | Cable trunking and ducting systems intended for mounting on walls or ceilings |
| (Part 8) : 2003 | Rigid non-threadable conduits of aluminium alloy | 14930 | Conduit systems for electrical installations: |
| 9926 : 1981 | Specification for fuse wires used in rewirable type electric fuses up to 650 V | (Part 1) : 2001 | General requirements |
| (Part 2) : 2001 | Particular requirements for conduit system buried underground | ||
| 10322 | Specification for luminaires: | 15368 : 2003 | Cable reels for household and similar purposes |
| (Part 1) : 1982 | General requirements | ||
| (Part 2) : 1982 | Constructional requirements | 12. FILLERS, STOPPERS AND PUTTIES | |
| (Part 3) : 1984 | Screw and screwless terminations | ||
| (Part 4) : 1984 | Methods of tests | 110 : 1983 | Specification for ready mixed paint, brushing, grey filler, for enamels, for use over primers (first revision) |
| (Part 5/Sec 1) : 1985 | Particular requirements, Section 1 General purpose luminaires | ||
| (Part 5/Sec 2) : 1985 | Particular requirements, Section 2 Recessed luminaires | 419 : 1967 | Specification for putty for use on window frames (first revision) |
| (Part 5/Sec 3) : 1987 | Particular requirements, Section 3 Luminaires for road and street lighting | 423 : 1961 | Specification for plastic wood, for joiner's filler (revised) |
| (Part 5/Sec 4) : 1987 | Particular requirements, Section 4 Portable general purpose luminaires | 3709 : 1966 | Specification for mastic cement for bedding of metal windows |
| 7164 : 1973 | Specification for stopper | ||
IS No. Title
13184 : 1991 Specification for mastic filler, epoxy based
| (Part 9):1986 | Determination of compressive strength perpendicular to grain (second revision) | 10420:1982 | Method of determination of sound absorption coefficient of timber by standing wave method |
| (Part 10):1986 | Determination of hardness under static indentation (second revision) | 10754:1983 | Method of determination of thermal conductivity of timber |
| (Part 11):1986 | Determination of shear strength parallel to grain (second revision) | 11215:1991 | Methods for determination of moisture content of timber and timber products (first revision) |
| (Part 12):1986 | Determination of tensile strength parallel to grain (second revision) | 13621:1993 | Method of test for determination of dielectric constant of wood under microwave frequencies |
| (Part 13):1986 | Determination of tensile strength perpendicular to grain (second revision) |
| (Part 14):1986 | Determination of cleavage strength parallel to grain (second revision) | iv) Structural Timber and Test | |
| (Part 15):1986 | Determination of nail and screw holding power (second revision) | 3629:1986 | Specification for structural timber in building (first revision) |
| (Part 16):1986 | Determination of brittleness by ized impact (second revision) | 4891:1988 | Specification for preferred cut sizes of structural timber (first revision) |
| (Part 17):1986 | Determination of brittleness by Charpy impact (second revision) | 4924 | Method of test for nail jointed timber trusses: |
| (Part 18):1986 | Determination of torsional strength (second revision) | (Part 1):1968 | Destructive test |
| (Part 2):1968 | Proof test |
| 1900:1974 | Method of testing wood poles (first revision) | v) Logs | |
| 2408:1963 | Methods of static tests of timbers in structural sizes | 3364 | Method of measurement and evaluation of defects in timber: |
| (Part 1):1976 | Logs (first revision) |
| (Part 2):1976 | Converted timber (first revision) |
| 2455:1990 | Method of sampling of model trees and logs for timber testing and their conversion (second revision) | 4895:1985 | Specification for teak logs (first revision) |
| 5246:2000 | Specification for coniferous logs (first revision) |
| 2753 | Methods for estimation of preservatives in treated timber and treating solutions: | 7308:1999 | Specification for non-coniferous logs (first revision) |
IS No. Title
6874 : 1973 Method of tests for round bamboos
8242 : 1976 Methods of tests for split bamboos
(Part 5) : 1977 Determination of tensile strength perpendicular to surface (first revision)
(Part 6) : 1977 Determination of tensile strength parallel to surface (first revision)
(Part 7) : 1977 Determination of compression — Perpendicular to plane of the board (first revision)
(Part 8) : 1977 Compression parallel to surface test (first revision)
(Part 9) : 1977 Determination of resistance to shear in plane of the board (first revision)
(Part 10) : 1977 Falling hammer impact test (first revision)
(Part 11) : 1977 Surface hardness (first revision)
(Part 12) : 1977 Central loading of plate test (first revision)
| IS No. | Title | IS No. | Title |
| (Part 13): 1977 | Long time loading bending test (first revision) | iii) Wood-Based Laminates | |
| (Part 14): 1977 | Screw and nail withdrawal test (first revision) | 3513 (Part 3): 1989 | Specification for resin treated compressed wood laminates (compregs): Part 3 For general purposes (first revision) |
| (Part 15): 1977 | Lateral nail resistance (first revision) | 3513 (Part 4): 1966 | Specification for high and medium density wood laminates (compreg): Part 4 Sampling and tests |
| (Part 16): 1977 | Determination of water absorption (first revision) | ||
| (Part 17): 1977 | Determination of swelling in water (first revision) | 7638: 1998 | Methods of sampling for wood/ lignocellulosic based panel products |
| (Part 18): 1977 | Determination of mass and dimensional changes caused by moisture changes (first revision) | 9307 | Methods of tests for wood-based structural sandwich construction: |
| (Part 19): 1977 | Durability cyclic test for interior use (first revision) | (Part 1): 1979 | Flexure test |
| (Part 2): 1979 | Edgewise compression test | ||
| (Part 3): 1979 | Flatwise compression test | ||
| (Part 20): 1977 | Accelerated weathering cyclic test for exterior use (first revision) | (Part 4): 1979 | Shear test |
| (Part 5): 1979 | Flatwise tension test | ||
| (Part 21): 1977 | Planeness test under uniform moisture content (first revision) | (Part 6): 1979 | Flexure creep test |
| (Part 7): 1979 | Cantilever vibration test | ||
| (Part 22): 1981 | Determination of surface glueability test | (Part 8): 1979 | Weathering test |
| (Part 23): 1981 | Vibration test for particle boards | 14315: 1995 | Specification for commercial veneers |
| 3087: 1985 | Specification for wood particle boards (medium density) for general purposes (first revision) | 14616: 1999 | Specification for laminated veneer lumber |
| 3097: 1980 | Specification for veneered particle boards (first revision) | iv) Bamboo and Coir Board Products | |
| 3129: 1985 | Specification for low density particle board (first revision) | 13958: 1994 | Specification for bamboo mat board for general purposes |
| 3308: 1981 | Specification for wood wool building slabs (first revision) | 14588: 1999 | Specification for bamboo mat veneer composite for general purposes |
| 3348: 1965 | Specification for fibre insulation boards | 14842: 2000 | Specification for coir veneer board for general purposes |
| 3478: 1966 | Specification for high density wood particle boards | 15476: 2004 | Specification for bamboo and corrugated sheets |
| 12406: 2003 | Specification for medium density fibreboards for general purposes (first revision) | v) Adhesives | |
| 12823: 1990 | Specification for prelaminated particle boards | 848: 1974 | Specification for synthetic resin adhesives for plywood (phenolic and aminoplastic) (first revision) |
| 13745: 1993 | Method for determination of formaldehyde content in particle board by extraction method called perforator method | 849: 1994 | Specification for cold setting case in glue for wood (first revision) |
| 14276: 1995 | Specification for cement bonded particle boards | 851: 1978 | Specification for synthetic resin adhesives for construction work (non-structural) in wood (first revision) |
| 14587: 1998 | Specification for prelaminated medium density fibre board | 852: 1994 | Specification for animal glue for general wood-working purposes (second revision) |
IS No. Title
1508 : 1972 Specification for extenders for use in synthetic resin adhesives (ureaformaldehyde) for plywood (first revision)
4835 : 1979 Specification for polyvinyl acetate dispersion-based adhesives for wood (first revision)
9188 : 1979 Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition
| 2687: 1991 |
| Specification for cap nuts (second revision) |
| 6733: 1972 |
| Specification for wall and roofing nails |
| 2907: 1998 | Specification for non-ferrous rivets (first revision) | 6736: 1972 | Specification for slotted raised countersunk head wood screws |
| 2998: 1982 | Specification for cold forged steel rivets for cold closing (1 to 16 mm diameter) (first revision) | 6739: 1972 | Specification for slotted round head wood screws |
| 3063: 1994 | Specification for fasteners single coil rectangular section spring lock washers (second revision) | 6760: 1972 | Specification for slotted countersunk head wood screws |
| 3121: 1981 | Specification for rigging screws and stretching screws (first revision) | 8033: 1976 | Specification for washers with square hole for wood fastenings |
| 3468: 1991 | Specification for pipe nuts (second revision) | 8412: 1977 | Specification for slotted countersunk head bolts for steel structures |
| 3757: 1985 | Specification for high strength structural bolts (second revision) | 8822: 1978 | Specification for slotted mushroom head roofing bolts |
| (Part 8/Sec 6):1993 |
| Tests for pigments and other solids, Section 6 Volume solids |
| (Part 9/Sec 1):1993 | Tests for lacquers and varnish, Section 1 Acid value | 3536:1999 | Specification for ready mixed paint, brushing, wood primer (first revision) |
| (Part 9/Sec 2):1993 | Tests for lacquers and varnish, Section 2 Rosin test | 3537:1966 | Specification for ready mixed paint, finishing, interior for general purposes, to Indian Standard colours No. 101, 216, 217, 219, 275, 281, 352, 353, 358 to 361, 363, 364, 388, 410, 442, 444, 628, 631, 632, 634, 693, 697, white and black |
| 104:1979 | Specification for ready mixed paint, brushing, zinc chrome, priming (second revision) |
| 109:1968 | Specification for ready mixed paint, brushing, priming, plaster to Indian Standard colours No. 361 and 631 (first revision) | 3539:1966 | Specification for ready mixed paint, undercoating, for use under oil finishes, to Indian Standard colours, as required |
| 123:1962 | Specification for ready mixed paint, brushing, finishing, semi-gloss, for general purposes, to Indian Standard colours No. 445, 446, 448, 449, 451 and 473; and red oxide (colour unspecified) (revised) | 3585:1966 | Specification for ready mixed paint, aluminium, brushing, priming, water resistant, for wood work |
| 3678 : 1966 | Specification for ready mixed paint, thick white, for lettering | 18. POLYMERS, PLASTICS AND GEOSYNTHETICS/GEOTEXTILES | 18. POLYMERS, PLASTICS AND GEOSYNTHETICS/GEOTEXTILES |
| 8662 : 1993 | Specification for enamel, synthetic, exterior, (a) undercoating, (b) finishing, for railway coaches (first revision) | 1998 : 1962 | Methods of test for thermosetting synthetic resin bonded laminated sheets |
| 9862 : 1981 | Specification for ready mixed paint, brushing, bituminous black lead free, acid, alkali, water and chlorine resisting | 2036 : 1995 | Specification for phenolic laminated sheets (second revision) |
| 9862 : 1981 | Specification for ready mixed paint, brushing, bituminous black lead free, acid, alkali, water and chlorine resisting | 2046 : 1995 | Specification for decorative thermosetting synthetics resin bonded laminated sheets (second revision) |
| 11883 : 1986 | Specification for ready mixed paint, brushing, red oxide, priming for metals | 2076 : 1981 | Specification for unsupported flexible vinyl film and sheeting (first revision) |
| 13183 : 1991 | Specification for aluminium paints, heat resistant | 2508 : 1984 | Specification for low density polyethylene films (second revision) |
| 13213 : 1991 | Specification for polyurethane full gloss enamel (two pack) | 2508 : 1984 | Specification for low density polyethylene films (second revision) |
| 13607 : 1992 | Specification for ready mixed paint, finishing, general purposes, synthetic | 6307 : 1971 | Specification for rigid PVC sheets |
| 13607 : 1992 | Specification for ready mixed paint, finishing, general purposes, synthetic | 9766 : 1992 | Specification for flexible PVC compound (first revision) |
| 13871 : 1993 | Specification for powder coatings | 10889 : 1984 | Specification for high density polyethylene films |
| c) Thinners and Solvents | c) Thinners and Solvents | c) Thinners and Solvents | c) Thinners and Solvents |
| 82 : 1992 | Methods of sampling and test for thinners and solvents for paints (first revision) | 12830 : 1989 | Specification for rubber based adhesives for fixing PVC tiles to cement |
| 324 : 1959 | Specification for ordinary denatured spirit (revised) | 13162 | Methods of test for geotextiles: |
| 324 : 1959 | Specification for ordinary denatured spirit (revised) | (Part 2) : 1991 | Determination of resistance to exposure of ultra-violet light and water (Xenon arc type apparatus) |
| 533 : 1998 | Specification for gum spirit of turpentine (oil of turpentine) (second revision) | (Part 3) : 1992 | Determination of thickness at specified pressure |
| 14314 : 1995 | Specification for thinner general purposes for synthetic paints and varnishes | (Part 4) : 1992 | Determination of puncture resistance by falling cone method |
| 14314 : 1995 | Specification for thinner general purposes for synthetic paints and varnishes | (Part 5) : 1992 | Determination of tensile properties using a wide width strip |
| d) Varnishes and Lacquers | d) Varnishes and Lacquers | d) Varnishes and Lacquers | d) Varnishes and Lacquers |
| 337 : 1975 | Specification for varnish, finishing, interior (first revision) | 13262 : 1992 | Specification for pressure sensitive adhesive tapes with plastic base |
| 347 : 1975 | Specification for varnish, shellac, for general purposes (first revision) | 13325 : 1992 | Method of test for the determination to tensile properties of extruded polymer geogrids using the wide strip |
| 348 : 1968 | Specification for French polish (first revision) | 13326 (Part 1) : 1992 | Method of test for the evaluation of interface friction between geosynthetics and soil: Part 1 Modified direct shear technique |
| 524 : 1983 | Specification for varnish, finishing, exterior, synthetic (second revision) | 13326 (Part 1) : 1992 | Method of test for the evaluation of interface friction between geosynthetics and soil: Part 1 Modified direct shear technique |
| 525 : 1968 | Specification for varnish, finishing, exterior and general purposes (first revision) | 14182 : 1994 | Specification for solvent cement for use with unplasticized polyvinylchloride plastic pipe and fittings |
| 642 : 1963 | Specification for varnish medium for aluminium paint (revised) | 14182 : 1994 | Specification for solvent cement for use with unplasticized polyvinylchloride plastic pipe and fittings |
| 15060 : 2001 | Tensile test for joints/seams by wide width method of geotextiles | 407 : 1981 | Specification for brass tubes for general purposes (third revision) |
| 15060 : 2001 | Tensile test for joints/seams by wide width method of geotextiles | 2501 : 1995 | Specification for solid drawn copper tubes for general engineering purposes (third revision) |
| 19. SANITARY Fittings | APPLIANCES AND WATER |
| a) General | ii) Cast Iron Pipes and Fittings | ii) Cast Iron Pipes and Fittings |
| 775 : 1970 | Specification for cast iron brackets and supports for wash basins and sinks (second revision) | 1536 : 2001 | Specification for centrifugally cast (spun) iron pressure pipes for water, gas and sewage (fourth revision) |
| 782 : 1978 | Specification for caulking lead (third revision) | 1537 : 1976 | Specification for vertically cast iron pressure pipes for water, gas and sewage (first revision) |
| 804 : 1967 | Specification for rectangular pressed steel tanks (first revision) | 1538 : 1993 | Specification for cast iron fittings for pressure pipes for water, gas and sewage (third revision) |
| 1700 : 1973 | Specification for drinking fountains (first revision) | 1729 : 2002 | Specification for sand cast iron spigot and socket soil, waste and ventilating pipes, fittings and accessories (second revision) |
| 2963 : 1979 | Specification for copper alloy waste fittings for wash-basins and sinks (first revision) |
| 3489 : 1985 | Specification for enamelled steel bath tubs (first revision) |
| IS No. | Title | IS No. | Title |
| 1879 : 1987 | Specification for malleable cast iron pipe fittings (second revision) | 12988 : 1991 | Rubber sealing rings for CID joints for light duty AC pipes — Dimensional requirements |
| 3486 : 1966 | Specification for cast iron spigot and socket drain pipes | 13382 : 1992 | Cast iron specials for mechanical and push on flexible joints for pressure pipelines for water, gas and sewage |
| 3989 : 1984 | Specification for centrifugally cast (spun) iron spigot and socket soil, waste and ventilating pipes, fittings and accessories (second revision) |
| 5531 : 1988 | Specification for cast iron specials for asbestos cement pressure pipes for water, gas and sewage (second revision) | 404 (Part 1) : 1993 | Specification for lead pipes: Part 1 For other than chemical purpose (third revision) |
| 6163 : 1978 | Specification for centrifugally cast (spun) iron low pressure pipes for water, gas and sewage (first revision) | iv) Fibre Pipes and Fittings | iv) Fibre Pipes and Fittings |
| 6163 : 1978 | Specification for centrifugally cast (spun) iron low pressure pipes for water, gas and sewage (first revision) | 11925 : 1986 | Specification for pitch-impregnated fibre pipes and fittings for drainage purposes |
| 6418 : 1971 | Specification for cast iron and malleable cast iron flanges for general engineering purposes | v) Plastic Pipes and Fittings | v) Plastic Pipes and Fittings |
| 6418 : 1971 | Specification for cast iron and malleable cast iron flanges for general engineering purposes | 3076 : 1985 | Specification for low density polyethylene pipes for potable water supplies (second revision) |
| 7181 : 1986 | Specification for horizontally cast iron double flanged pipes for water, gas and sewage (first revision) | 4984 : 1995 | Specification for high density polyethylene pipes for water supply (fourth revision) |
| 8329 : 2000 | Specification for centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage (third revision) | 4985 : 2000 | Specification for unplasticized PVC pipes for potable water supplies (third revision) |
| 8794 : 1988 | Specification for cast iron detachable joints for use with asbestos cement pressure pipes (first revision) | 7834 | Specification for injection moulded PVC socket fittings with solvent cement joints for water supplies: |
| 9523 : 1980 | Specification for ductile iron fittings for pressure pipes for water, gas and sewage | (Part 1) : 1987 | General requirements (first revision) |
| 9523 : 1980 | Specification for ductile iron fittings for pressure pipes for water, gas and sewage | (Part 2) : 1987 | Specific requirements for 45° elbows (first revision) |
| 10292 : 1988 | Dimensional requirements for rubber sealing rings for CID joints in asbestos cement piping (first revision) | (Part 3) : 1987 | Specific requirements for 90° elbows (first revision) |
| 10292 : 1988 | Dimensional requirements for rubber sealing rings for CID joints in asbestos cement piping (first revision) | (Part 4) : 1987 | Specific requirements for 90° tees (first revision) |
| 10299 : 1982 | Cast iron saddle pieces for service connection from asbestos cement pressure pipes | (Part 5) : 1987 | Specific requirements for 45° tees (first revision) |
| 11606 : 1986 | Methods of sampling cast iron pipes and fittings | (Part 6) : 1987 | Specific requirements for sockets (first revision) |
| 12820 : 1989 | Dimensional requirements of rubber gaskets for mechanical joints and push on joints for use with cast iron pipes and fittings for carrying water, gas and sewage | (Part 7) : 1987 | Specific requirements for unions (first revision) |
| 12820 : 1989 | Dimensional requirements of rubber gaskets for mechanical joints and push on joints for use with cast iron pipes and fittings for carrying water, gas and sewage | (Part 8) : 1987 | Specific requirements for caps (first revision) |
| 12987 : 1991 | Cast iron detachable joints for use with asbestos cement pressure pipes (light duty) | 8008 | Specification for injection moulded high density polyethylene (HDPE) fittings for potable water supplies: |
| 12987 : 1991 | Cast iron detachable joints for use with asbestos cement pressure pipes (light duty) | (Part 1) : 2003 | General requirements |
| (Part 3): 1988 | Specific requirements of straight reducers (first revision) | 13592: 1992 | Specification for UPVC pipes for soil and waste discharge systems inside buildings including ventilation and rainwater system |
| (Part 4): 1988 | Specific requirements for caps (first revision) | 14333: 1996 | Specification for high density polyethylene pipes for sewerage |
| (Part 5): 1988 | Specific requirements for equal tees (first revision) | 14402: 1996 | Specification for GRP pipes, joints and fittings for use for sewerage, industrial waste and water (other than potable) |
| (Part 6): 1988 | Specific requirements for flanged tail piece with metallic flanges (first revision) |
| (Part 7): 1988 | Specific requirements for threaded adaptors (first revision) | 14735: 1999 | Specification for unplasticized polyvinyl chloride (UPVC) injection moulded fittings for soil and waste discharge system for inside buildings including ventilation and rain water system |
| (Part 8): 1988 | Specific requirements for 90° bends (first revision) |
| (Part 9): 1988 | Specific requirements for 60° bends (first revision) | 14885: 2001 | Specification for polyethylene pipe for supply of gaseous fuel |
| (Part 10): 1988 | Specific requirements for 45° bends (first revision) | 15225: 2002 | Specification for chlorinated polyvinyl chloride compounds used for pipes and fittings |
| (Part 11): 1988 | Specific requirements for 30° bends (first revision) |
| (Part 12): 1988 | Specific requirements for 221⁄2° bends (first revision) | 15328: 2003 | Specification for unplasticized non-pressure polyvinyl chloride (PVC-U) pipes for use in underground drainage and sewerage system |
| (Part 13): 1988 | Specific requirements for 111⁄4° bends (first revision) |
| 4038:1986 |
| Specification for foot valves for water works purposes (second revision) |
| (Part 15):1995 | Specific requirements of universal water closets (first revision) | 4346:1982 | Specification for washers for use with fittings for water services (first revision) |
| (Part 16):2002 | Specific requirements for wash down wall mounted water-closets |
| (Part 17):1995 | Specific requirements for wall mounted bidets | 5312 | Specification for swing check type reflux (non-return) valves: |
| 5961:1970 | Specification for cast iron gratings for drainage purposes | (Part 1):1984 | Single door pattern (first revision) |
| (Part 2):1986 | Multi-door pattern |
| 7231:1984 | Specification for plastic flushing cisterns for water-closets and urinals (second revision) | 8931:1993 | Specification for cast copper alloy fancy single tap combination tap and stop valves for water services (first revision) |
| 11246:1992 | Specification for glass fibre reinforced polyester resins (GRP) squatting pans (first revision) | 9338:1984 | Specification for cast iron screw-down stop valves and stop and check valves for water works purposes (first revision) |
| d) Valves and Fittings (Including Ferrules) |
| 778:1984 | Specification for copper alloy gate, globe, and check valves for water works purposes (fourth revision) | 9739:1981 | Specification for pressure reducing valves for domestic water supply systems |
| 781:1984 | Specification for cast copper alloy screw-down bib taps and stop valves for water services (third revision) | 9758:1981 | Specification for flush valves and fittings for water-closets and urinals |
| 9762:1994 | Specification for polyethylene floats (spherical) for float valves (first revision) |
| 1701:1960 | Specification for mixing valves for ablutionary and domestic purposes | 9763:2000 | Specification for plastic bib taps, pillar taps, angle valves, hot and cold water services (second revision) |
| 1703:2000 | Specification for copper alloy float valves (horizontal plunger type) for water supply fittings (third revision) | 12234:1988 | Specification for plastic equilibrium float valve for cold water services |
| 1711:1984 | Specification for self-closing taps for water supply purposes (second revision) | 13049:1991 | Specification for diaphragm type (plastic body) float operated valves for cold water services |
| 1795:1982 | Specification for pillar taps for water supply purposes (second revision) | 13114:1991 | Specification for forged brass gate, globe and check valves for water works purposes |
| 2692:1989 | Specification for ferrules for water services (second revision) | 14845:2000 | Specification for resilient seated cast iron air relief valves for water works purposes |
| 3004:1979 | Specification for plug cocks for water supply purposes (first revision) | 14846:2000 | Specification for sluice valves for water works purposes (50 to 1 200 mm) |
| 3042:1965 | Specification for single faced sluice gates (200 to 1 200 mm size) |
| 3311:1979 | Specification for waste plug and its accessories for sinks and washbasins (first revision) | e) Water Meters | Specification for water meters (domestic type) (sixth revision) |
IS No. Title
2104 : 1981 Specification for water meter boxes (domestic type) (first revision)
2373 : 1981 Specification for water meters (bulk type) (third revision)
6784 : 1996 Method for performance testing of water meters (domestic type) (second revision)
| 3502 : 1994 | Specification for steel chequered plates (second revision) | 1706 : 1972 | Method of determination of resistance to wear by abrasion of natural building stones (first revision) |
| f) Tubes and Tubulars |
| 1161 : 1998 | Specification for steel tubes for structural purposes (fourth revision) | 3316 : 1974 | Specification for structural granite (first revision) |
| 4516 : 1968 | Specification for elliptical mild steel tubes | 3620 : 1979 | Specification for laterite stone block for masonry (first revision) |
| 4923 : 1997 | Specification for hollow mild steel sections for structural use (first revision) | 3622 : 1977 | Specification for sand stone (slabs and tiles) (first revision) |
| g) Slotted Sections |
| 8081 : 1976 | Specification for slotted sections | 4122 : 1967 | Method of test for surface softening of natural building stones by exposure to acidic atmospheres |
| 22. STONES |
| 1121 | Methods of test for determination of strength properties of natural building stones: | 4348 : 1973 | Methods of test for determination of permeability of natural building stones (first revision) |
| (Part 1) : 1974 | Compressive strength (first revision) | 5218 : 1969 | Method of test for toughness of natural building stones |
| (Part 2) : 1974 | Transverse strength (first revision) | 5640 : 1970 | Method of test for determining the aggregate impact value of soft coarse aggregates |
| (Part 3) : 1974 | Tensile strength (first revision) |
| (Part 4) : 1974 | Shear strength (first revision) |
6250 : 1981 Specification for roofing slate tiles 1863 : 1979 Specification for hot rolled steel (first revision) bulb flats (first revision)
(Part 1/Sec 1) : Gujarat state, Section 1 Availability 1975 of stones
(Part 1/Sec 2) : Gujarat state, Section 2 Engineering 1975 properties of building stones