b) The list at the end of this part has been completely reclassified to make it more user friendly and updated to reflect the latest available Indian Standard and methods of test.
A reference to SP 21 ‘Summaries of Indian Standards for building materials’ may be useful. This publication gives the summaries of Indian Standards covering various building materials, fittings and components except standards relating to paints.
All standards cross-referred to in the main text of this Part, are subject to revision. The parties to agreement based on this section are encouraged to investigate the possibility of applying the most recent editions of the standards.
2Materials
Every material used in fulfilment of the requirements of this Part, unless otherwise specified in the Code or approved, shall conform to the relevant Indian Standards. A list of Indian Standards as the ‘accepted standards’ is given at the end of this Part of the Code. At the time of publication of the Code, the editions indicated were valid. All standards are subject to amendments and revisions. The Authority shall take cognizance of such amendments and revisions. The latest version of a standard shall, as far as possible, be adopted at the time of enforcement of this Part of the Code.
1Scope
This Part of the Code covers the requirements of building materials and components, and criteria for accepting new or alternative building materials and components.
List of Standards
Following are the Indian Standards for various building materials and components, to be complied with in fulfillment of the requirements of the Code.
In the following list, while enlisting the Indian Standards, the materials have been categorized in such a way as to make the list user friendly. In the process, if so required, some of the standards have been included even in more than one category of products, such as in the category based on composition as well as on end application of the materials. The list has been arranged in alphabetical order of their principal category as given below:
IS No.
Title
733 : 1983
Specification for wrought aluminium and aluminium alloys, bars, rods and sections for general engineering purposes (third revision)
737 : 1986
Specification for wrought aluminium and aluminium alloys, sheet rods and strip for general engineering purposes (third revision)
1. ALUMINIUM AND OTHER LIGHT METALS AND THEIR ALLOYS
2. BITUMEN AND TAR PRODUCTS
3. BUILDER'S HARDWARES
738 : 1994
Specification for wrought aluminium and aluminium alloy drawn tube for general engineering purposes (third revision)
4. BUILDING CHEMICALS
5. BUILDING LIME AND PRODUCTS
6. BURNT CLAY PRODUCTS
7. CEMENT AND CONCRETE (including concrete reinforcement)
740 : 1977
Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (second revision)
(Part 2) : 1984 CNSL aldehyde resin and coconut pith 11433 Specification for one grade
(Part 1) : 1985 polysulphide based joint sealant: Part 1 General requirements
12118 Specification for two parts polysulphide based sealants:
(Part 2) : 1987 Methods of test
d) Adhesives
848 : 1974 Specification for synthetic resin adhesives for plywood (phenolic and aminoplastic) (first revision)
849 : 1994 Specification for cold setting case in glue for wood (first revision)
851 : 1978 Specification for synthetic resin adhesives for construction work (non-structural) in wood (first revision)
852 : 1994 Specification for animal glue for general wood-working purposes (second revision)
4835 : 1979 Specification for polyvinyl acetate dispersion-based adhesives for wood (first revision)
9188 : 1979 Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition
12830 : 1989 Rubber based adhesives for fixing PVC tiles to cement
12994 : 1990 Epoxy adhesives, room temperature curing general purpose
5Building Lime and Products
712 : 1984 Specification for building limes (third revision)
1624 : 1986 Method of field testing of building lime (first revision)
2686 : 1977 Specification for cinder as fine aggregates for use in lime concrete (first revision)
3068 : 1986 Specification for broken brick (burnt-clay) coarse aggregates for use in lime concrete (second revision)
3115 : 1992 Specification for lime based blocks (second revision)
3182 : 1986 Specification for broken bricks (burnt clay) fine aggregates for use in lime mortar (second revision)
4098 : 1983 Specification for lime-pozzolana mixture (first revision)
4139 : 1989 Specification for calcium silicate bricks (second revision)
6932 Method of tests for building limes: (Part 1) : 1973 Determination of insoluble residue, loss on ignition, insoluble matter, silicon dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide
(Part 2) : 1973 Determination of carbon dioxide content
(Part 3) : 1973 Determination of residue on slaking of quicklime
(Part 4) : 1973 Determination of fineness of hydrated lime
(Part 5) : 1973 Determination of unhydrated oxide
IS No.
Title
IS No.
Title
(Part 6):1973
Determination of volume yield of quicklime
6165:1992
Dimensions for special shapes of clay bricks (first revision)
(Part 7):1973
Determination of compressive and transverse strength
11650:1991
Guide for manufacture of common burnt clay building bricks by semi-mechanized process (first revision)
(Part 8):1973
Determination of workability
(Part 9):1973
Determination of soundness
13757:1993
Specification for burnt clay fly ash building bricks
(Part 10):1973
Determination of popping and pitting of hydrated lime
d) Jallies
(Part 11):1984
Determination of setting time of hydrated lime
7556:1988
Specification for burnt clay jallies (first revision)
10360:1982
Specification for lime pozzolana concrete blocks for paving
e) Tiles
10772:1983
Specification for quick setting lime pozzolana mixture
654:1992
Specification for clay roofing tiles, Mangalore pattern (third revision)
12894:2002
Specification for pulverized fuel ash lime bricks (first revision)
1464:1992
Specification for clay ridge and ceiling tiles (second revision)
6. BURNT CLAY PRODUCTS
6. BURNT CLAY PRODUCTS
1478:1992
Specification for clay flooring tiles (second revision)
a) Blocks
2690
Specification for burnt clay flat terracing tiles:
3952:1988
Specification for burnt hollow bricks for walls and partitions (second revision)
(Part 1):1993
Machine made (second revision)
3952:1988
Specification for burnt hollow bricks for walls and partitions (second revision)
(Part 2):1992
Handmade (second revision)
b) Soil-Based Products
b) Soil-Based Products
3367:1993
Specification for burnt clay tiles for use in lining irrigation and drainage works (second revision)
1725:1982
Specification for soil-based blocks used in general building construction
3951
Specification for hollow clay tiles for floor and roofs:
c) Bricks
1077:1992
Specification for common burnt clay building bricks (fifth revision)
(Part 1):1975
Filler type (first revision)
1077:1992
Specification for common burnt clay building bricks (fifth revision)
(Part 2):1975
Structural type (first revision)
2117:1991
Guide for manufacture of hand-made-common burnt clay building bricks (third revision)
13317:1992
Specification for clay roofing camty tiles, half round and flat tiles
2180:1988
Specification for heavy duty burnt clay building bricks (third revision)
7. CEMENT AND CONCRETE (including concrete reinforcement)
7. CEMENT AND CONCRETE (including concrete reinforcement)
2222:1991
Specification for burnt clay perforated building bricks (fourth revision)
a) Aggregates
2691:1988
Specification for burnt clay facing bricks (second revision)
383:1970
Specification for coarse and fine aggregates from natural sources for concrete (second revision)
3495(Parts 1 to 4):1992
Methods of test of burnt clay building bricks (third revision)
1542:1992
Specification for sand for plaster (second revision)
3583:1988
Specification for burnt clay paving bricks (second revision)
2116:1980
Specification for sand for masonry mortars (first revision)
4885:1988
Specification for sewer bricks (first revision)
2386
Methods of test for aggregates for concrete:
5454:1978
Methods for sampling of clay building bricks
(Part 1):1963
Particle size and shape
5779:1986
Specification for burnt clay soling bricks (first revision)
(Part 2):1963
Estimation of deleterious materials and organic impurities
(Part 3):1963
Specific gravity, density, voids, absorption and bulking
IS No.
Title
IS No.
Title
(Part 4):1963
Mechanical properties
3812
Specification for pulverized fuel ash:
(Part 5):1963
Soundness
Specification for pulverized fuel ash:
(Part 6):1963
Measuring mortar making properties of fine aggregates
(Part 1):2003
For use as pozzolana in cement, cement mortar and concrete (second revision)
(Part 7):1963
Alkali aggregate reactivity
For use as pozzolana in cement, cement mortar and concrete (second revision)
(Part 8):1963
Petrographic examination
(Part 2):2003
For use as admixture in cement mortar and concrete (second revision)
2430:1986
Methods of sampling of aggregates of concrete (first revision)
For use as admixture in cement mortar and concrete (second revision)
6579:1981
Specification for coarse aggregate for water bound macadam (first revision)
6491:1972
Method of sampling of flyash
6579:1981
Specification for coarse aggregate for water bound macadam (first revision)
6925:1973
Methods of test for determination of water soluble chlorides in concrete admixtures
9142:1979
Specification for artificial lightweight aggregates for concrete masonry units
9103:1999
Specification for admixtures for concrete (first revision)
b) Cement
12089:1987
Specification for granulated slag for manufacture of Portland slag cement
269:1989
Specification for ordinary portland cement, 33 Grade (fourth revision)
Specification for granulated slag for manufacture of Portland slag cement
455:1989
Specification for Portland slag cement (fourth revision)
12870:1989
Methods of sampling calcined clay pozzolana
1489
Specification for Portland pozzolana cement:
15388:2003
Specification for silica fume
1489
Specification for Portland pozzolana cement:
d) Concrete
(Part 1):1991
Flyash based (third revision)
456:2000
Code of practice for plain and reinforced concrete (fourth revision)
(Part 2):1991
Calcined clay based (third revision)
Code of practice for plain and reinforced concrete (fourth revision)
3466:1988
Specification for masonry cement (second revision)
1343:1980
Code of practice for prestressed concrete (first revision)
6452:1989
Specification for high alumina cement for structural use (first revision)
4926:2003
Code of practice for ready-mixed concrete (third revision)
6909:1990
Specification for supersulphated cement
e) Cement and Concrete Sampling and Methods of Test
8041:1990
Specification for rapid hardening Portland cement (second revision)
516:1959
Methods of test for strength of concrete
8042:1989
Specification for white Portland cement (second revision)
1199:1959
Methods of sampling and analysis of concrete
8043:1991
Specification for hydrophobic Portland cement (second revision)
2770
Methods of testing bond in reinforced concrete: Part 1 Pullout test
8112:1989
Specification for 43 grade ordinary Portland cement (first revision)
(Part 1):1967
Methods of testing bond in reinforced concrete: Part 1 Pullout test
12269:1987
Specification for 53 grade ordinary Portland cement
3085:1965
Methods of test for permeability of cement mortar and concrete
12330:1988
Specification for sulphate resisting Portland cement
3535:1986
Methods of sampling hydraulic cement (first revision)
12600:1989
Specification for low heat Portland cement
4031
Methods of physical tests for hydraulic cement:
c) Mineral/Chemical Admixtures and Pozzolanas
c) Mineral/Chemical Admixtures and Pozzolanas
(Part 1):1996
Determination of fineness by dry sieving (second revision)
1344:1981
Specification for calcined clay pozzolana (second revision)
(Part 2):1999
Determination of fineness by specific surface by Blaine air permeability method (second revision)
1727:1967
Methods of test for pozzolanic materials (first revision)
Determination of fineness by specific surface by Blaine air permeability method (second revision)
IS No. Title
(Part 3) : 1988 Determination of soundness (first revision)
(Part 4) : 1988 Determination of consistency of standard cement paste (first revision)
(Part 5) : 1988 Determination of initial and final setting times (first revision)
(Part 6) : 1988 Determination of compressive strength of hydraulic cement (other than masonry cement) (first revision)
(Part 7) : 1988 Determination of compressive strength of masonry cement (first revision)
(Part 8) : 1988 Determination of transverse and compressive strength of plastic mortar using prism (first revision)
(Part 9) : 1988 Determination of heat of hydration (first revision)
(Part 10) : 1988 Determination of drying shrinkage (first revision)
(Part 11) : 1988 Determination of density (first revision)
(Part 12) : 1988 Determination of air content of hydraulic cement mortar (first revision)
(Part 14) : 1989 Determination of false set
(Part 15) : 1991 Determination of fineness by wet sieving
4032 : 1985 Methods of chemical analysis for hydraulic cement (first revision)
5816 : 1999 Method of test for splitting tensile strength of concrete (first revision)
8142 : 1976 Methods of test for determining setting time of concrete by penetration resistance
9013 : 1978 Method of making, curing and determining compressive strength of accelerated cured concrete test specimens
9284 : 1979 Method of test for abrasion resistance of concrete
12423 : 1988 Methods for colorometric analysis of hydraulic cement
12803 : 1989 Methods of analysis of hydraulic cement by X-ray fluorescence spectrometer
IS No. Title
12813 : 1989 Method of analysis of hydraulic cement by atomic absorption spectrophotometer
13311 Methods of non-destructive testing of concrete:
(Part 1) : 1992 Ultrasonic pulse velocity
(Part 2) : 1992 Rebound hammer
f) Treatment of Concrete Joints
1834 : 1984 Specification for hot applied sealing compound for joint in concrete (first revision)
1838 Specification for preformed fillers for expansion joint in concrete pavements and structures (non-extruding and resilient type):
(Part 2) : 1984 CNSL aldehyde resin and coconut pith
10566 : 1983 Methods of test for preformed fillers for expansion joints in concrete paving and structural construction
11433 Specification for one grade polysulphide based joint sealant:
(Part 1) : 1985 General requirements
(Part 2) : 1986 Methods of test
12118 Specification for two parts polysulphide based sealants:
(Part 1) : 1987 General requirements
(Part 2) : 1987 Methods of test
g) Concrete Reinforcement
432 Specification for mild steel and medium tensile steel bars and hard drawn steel wire for concrete reinforcement:
(Part 1) : 1982 Mild steel and medium tensile steel bars (third revision)
(Part 2) : 1982 Hard drawn steel wire (third revision)
1566 : 1982 Specification for hard drawn steel wire fabric for concrete reinforcement (second revision)
1608 : 1995 Mechanical testing of materials — Tensile testing
1785 Specification for plain hard drawn steel wire for prestressed concrete:
IS No.
Title
IS No.
Title
(Part 1): 1983
Cold drawn stress-relieved wire (second revision)
6073: 1971
Specification for autoclaved reinforced cellular concrete floor and roof slabs
(Part 2): 1983
As drawn wire (first revision)
1786: 1985
Specification for high strength deformed steel bars and wires for concrete reinforcement (third revision)
6441
Methods of test for autoclaved cellular concrete products:
(Part 1): 1972
Determination of unit weight or bulk density and moisture content
2090: 1983
Specification for high tensile steel bars used in prestressed concrete (first revision)
(Part 2): 1972
Determination of drying shrinkage
(Part 4): 1972
Corrosion protection of steel reinforcement in autoclaved cellular concrete
6003: 1983
Specification for indented wire for prestressed concrete (first revision)
(Part 5): 1972
Determination of compressive strength
6006: 1983
Specification for uncoated stress-relieved strand for prestressed concrete (first revision)
(Part 6): 1973
Strength, deformation and cracking of flexural members subject to bending-short duration loading test
10790
Methods of sampling of steel for prestressed and reinforced concrete:
(Part 7): 1973
Strength, deformation and cracking of flexural members subject to bending-sustained loading test
(Part 1): 1984
Prestressing steel
(Part 8): 1973
Loading tests for flexural members in diagonal tension
(Part 2): 1984
Reinforcing steel
13620: 1993
Specification for fusion bonded epoxy coated reinforcing bars
(Part 9): 1973
Jointing of autoclaved cellular concrete elements
iii) Other Fibre Cement Products
14862 : 2000 Specification for fibre cement flat sheets
14871 : 2000 Specification for products in fibre reinforced cement long corrugated or asymmetrical section sheets and fittings for roofing and cladding
iv) Concrete Pipes and Pipes Lined/Coated with Concrete or Mortar
458 : 2003 Specification for precast concrete pipes (with and without reinforcement) (fourth revision)
1003 Specification for timber panelled and glazed shutters:
(Part 1) : 2003 Door shutters (fourth revision)
(Part 2) : 1994 Window and ventilator shutters (third revision)
1826 : 1961 Specification for venetian blinds for windows
(Part 1) : 1983 Plywood face panels (fourth revision)
(Part 2) : 1983 Particle board face panels and hardboard face panels (third revision) 2202 Specification for wooden flush door shutters (solid core type):
(Part 1) : 1991 Plywood face panels (fifth revision)
(Part 2) : 1983 Particle board face panels and hardboard face panels (third revision)
4020 Method of tests for door shutters:
(Part 1) : 1998 General (third revision)
(Part 2) : 1998 Measurement of dimensions and squareness (third revision)
(Part 3) : 1998 Measurement of general flatness (third revision)
(Part 4) : 1998 Local planeness test (third revision)
(Part 5) : 1998 Impact indentation test (third revision)
IS No. Title
(Part 6) : 1998 Flexure test (third revision)
(Part 7) : 1998 Edge loading test (third revision)
(Part 8) : 1998 Shock resistance test (third revision)
(Part 9) : 1998 Buckling resistance test (third revision)
(Part 10) : 1998 Slamming test (third revision)
(Part 11) : 1998 Misuse test (third revision)
(Part 12) : 1998 Varying humidity test (third revision)
(Part 13) : 1998 End immersion test (third revision)
(Part 14) : 1998 Knife test (third revision)
(Part 15) : 1998 Glue adhesion test (third revision)
(Part 16) : 1998 Screw withdrawal resistance test (third revision)
4021 : 1995 Specification for timber door, window and ventilator frames
4962 : 1968 Specification for wooden side sliding doors
6198 : 1992 Specification for ledged, braced and battened timber shutters (second revision)
b) Metal Doors, Windows Frames and Ventilators
1038 : 1983 Specification for steel doors, windows and ventilators (third revision)
1361 : 1978 Specification for steel windows for industrial buildings (first revision)
1948 : 1961 Specification for aluminium doors, windows and ventilators
1949 : 1961 Specification for aluminium windows for industrial buildings
4351 : 2003 Specification for steel door frames (second revision)
6248 : 1979 Specification for metal rolling shutters and rolling grills (first revision)
7452 : 1990 Specification for hot rolled steel sections for doors, windows and ventilators (second revision)