3.1 The provisions of this Part are not intended to prevent the use of any material not specifically prescribed under 2. Any such material may be approved by the Authority or an agency appointed by them for the purpose, provided it is established that the material is satisfactory for the purpose intended and the equivalent of that required in this Part or any other specification issued or approved by the Authority. The Authority or an agency appointed by them shall take into account the following parameters, as applicable to the concerned new or alternative building material:
a) Requirements of the material specified/ expected in terms of the provisions given in the standards on its usage, including its applicability in geo-climatic condition;
b) General appearance;
c) Dimension and dimensional stability;
d) Structural stability including strength properties;
e) Fire safety;
f) Durability;
g) Thermal properties;
h) Mechanical properties;
j) Acoustical properties;
k) Optical properties;
m) Biological effect;
n) Environmental aspects;
p) Working characteristics;
q) Ease of handling; and
r) Consistency and workability.
5
For establishing the performance of the material/
component, laboratory/field tests, and field trials, as required, and study of historical data are recommended.
3.2 Approval in writing of the Authority or an agent appointed by them for the purpose of approval of material, shall be obtained by the owner or his agent before any new, alternative or equivalent material is used. The Authority or their agent shall base such approval on the principle set forth in 3.1 and shall require that tests be made (see 7.1) or sufficient evidence or proof be submitted, at the expense of the owner or his agent, to substantiate any claim for the proposed material.
NOTE — For interpretation of the term ‘Authority’ (see also 7.1), the definition of ‘Authority having jurisdiction’ given in Part 2 ‘Administration’ shall apply.