This Part of the Code covers the requirements of building materials and components, and criteria for accepting new or alternative building materials and components.
b) The list at the end of this part has been completely reclassified to make it more user friendly and updated to reflect the latest available Indian Standard and methods of test.
A reference to SP 21 ‘Summaries of Indian Standards for building materials’ may be useful. This publication gives the summaries of Indian Standards covering various building materials, fittings and components except standards relating to paints.
All standards cross-referred to in the main text of this Part, are subject to revision. The parties to agreement based on this section are encouraged to investigate the possibility of applying the most recent editions of the standards.
Following are the Indian Standards for various building materials and components, to be complied with in fulfillment of the requirements of the Code.
| In the following list, while enlisting the Indian Standards, the materials have been categorized in such a way as to make the list user friendly. In the process, if so required, some of the standards have been included even in more than one category of products, such as in the category based on composition as well as on end application of the materials. The list has been arranged in alphabetical order of their principal category as given below: | IS No. | Title |
| 733 : 1983 | Specification for wrought aluminium and aluminium alloys, bars, rods and sections for general engineering purposes (third revision) | |
| 737 : 1986 | Specification for wrought aluminium and aluminium alloys, sheet rods and strip for general engineering purposes (third revision) | |
| 1. ALUMINIUM AND OTHER LIGHT METALS AND THEIR ALLOYS | ||
| 2. BITUMEN AND TAR PRODUCTS | ||
| 3. BUILDER'S HARDWARES | 738 : 1994 | Specification for wrought aluminium and aluminium alloy drawn tube for general engineering purposes (third revision) |
| 4. BUILDING CHEMICALS | ||
| 5. BUILDING LIME AND PRODUCTS | ||
| 6. BURNT CLAY PRODUCTS | ||
| 7. CEMENT AND CONCRETE (including concrete reinforcement) | 740 : 1977 | Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (second revision) |
| 8. COMPOSITE MATRIX PRODUCTS (including cement matrix products) | ||
| 9. CONDUCTORS AND CABLES | 1254 : 1991 | Specification for corrugated aluminium sheet (third revision) |
| 10. DOORS, WINDOWS AND VENTILATORS | ||
| 11. ELECTRICAL WIRING, FITTINGS AND ACCESSORIES | 1284 : 1975 | Wrought aluminium alloy bolt and screw stock for general engineering purposes (second revision) |
| 12. FILLERS, STOPPERS AND PUTTIES | ||
| 13. FLOOR COVERING, ROOFING AND OTHER FINISHES | 1285 : 2002 | Specification for wrought aluminium and aluminium alloys, extruded round tube and hollow sections for general engineering purposes (third revision) |
| 14. GLASS | ||
| 15. GYPSUM BASED MATERIALS | ||
| 16. LIGNOCELLULOSIC BUILDING MATERIALS (including timber, bamboo and products thereof) | 2479 : 1981 | Colour code for the identification of aluminium and aluminium alloys for general engineering purposes (second revision) |
| 17. PAINTS AND ALLIED PRODUCTS | ||
| 18. POLYMERS, PLASTICS AND GEOSYNTHETICS/GEOTEXTILES | 2676 : 1981 | Dimensions for wrought aluminium and aluminium alloy sheet and strip |
| 19. SANITARY APPLIANCES AND WATER FITTINGS | ||
| 20. SOIL-BASED PRODUCTS | 2677 : 1979 | Dimensions for wrought aluminium and aluminium alloys, plates and hot rolled sheets |
| 21. STEEL AND ITS ALLOYS | ||
| 22. STONES | ||
| 23. STRUCTURAL SECTIONS | 14712 : 1999 | Wrought aluminium and its alloys — Chequered/tread sheets for general engineering purposes — Specification |
| 24. THERMAL INSULATION MATERIALS | ||
| 25. THREADED FASTENERS AND RIVETS | ||
| 26. UNIT WEIGHTS OF BUILDING MATERIALS | ||
| 27. WATERPROOFING AND DAMP-PROOFING MATERIALS | 2. BITUMEN AND TAR PRODUCTS | |
| 73 : 1992 | Specification for paving bitumen (second revision) | |
| 28. WELDING ELECTRODES AND WIRES | ||
1003 Specification for timber panelled and glazed shutters:
(Part 1) : 2003 Door shutters (fourth revision)
(Part 2) : 1994 Window and ventilator shutters (third revision)
1826 : 1961 Specification for venetian blinds for windows
(Part 1) : 1983 Plywood face panels (fourth revision)
(Part 2) : 1983 Particle board face panels and hardboard face panels (third revision) 2202 Specification for wooden flush door shutters (solid core type):
(Part 1) : 1991 Plywood face panels (fifth revision)
(Part 2) : 1983 Particle board face panels and hardboard face panels (third revision)
4020 Method of tests for door shutters:
(Part 1) : 1998 General (third revision)
(Part 2) : 1998 Measurement of dimensions and squareness (third revision)
(Part 3) : 1998 Measurement of general flatness (third revision)
(Part 4) : 1998 Local planeness test (third revision)
(Part 5) : 1998 Impact indentation test (third revision)
IS No. Title
(Part 6) : 1998 Flexure test (third revision)
(Part 7) : 1998 Edge loading test (third revision)
(Part 8) : 1998 Shock resistance test (third revision)
(Part 9) : 1998 Buckling resistance test (third revision)
(Part 10) : 1998 Slamming test (third revision)
(Part 11) : 1998 Misuse test (third revision)
(Part 12) : 1998 Varying humidity test (third revision)
(Part 13) : 1998 End immersion test (third revision)
(Part 14) : 1998 Knife test (third revision)
(Part 15) : 1998 Glue adhesion test (third revision)
(Part 16) : 1998 Screw withdrawal resistance test (third revision)
4021 : 1995 Specification for timber door, window and ventilator frames
4962 : 1968 Specification for wooden side sliding doors
6198 : 1992 Specification for ledged, braced and battened timber shutters (second revision)
b) Metal Doors, Windows Frames and Ventilators
1038 : 1983 Specification for steel doors, windows and ventilators (third revision)
1361 : 1978 Specification for steel windows for industrial buildings (first revision)
1948 : 1961 Specification for aluminium doors, windows and ventilators
1949 : 1961 Specification for aluminium windows for industrial buildings
4351 : 2003 Specification for steel door frames (second revision)
6248 : 1979 Specification for metal rolling shutters and rolling grills (first revision)
7452 : 1990 Specification for hot rolled steel sections for doors, windows and ventilators (second revision)
10451 : 1983 Specification for steel sliding shutters (top hung type)
10521 : 1983 Specification for collapsible gates
14856 : 2000 Specification for glass fibre reinforced (GRP) panel type door shutters for internal use
| IS No. | Title | IS No. | Title |
| 15380 : 2003 | Specification for moulded raised high density fibre (HDF) panel doors | 2215 : 1983 | Specification for starters for fluorescent lamps (third revision) |
| 2412 : 1975 | Specification for link clips for electrical wiring (first revision) | ||
| 11. ELECTRICAL WIRING FITTINGS AND ACCESSORIES | 2418 | Specification for tubular fluorescent lamps for general lighting services: | |
| 371 : 1999 | Specification for ceiling roses (third revision) | (Part 1) : 1977 | Requirements and tests (first revision) |
| 374 : 1979 | Specification for electric ceiling type fans and regulators (third revision) | (Part 2) : 1977 | Standard lamp data sheets (first revision) |
| 418 : 1978 | Specification for tungsten filament general service electric lamps (third revision) | (Part 3) : 1977 | Dimensions of G-5 and G-13 bi-pin caps (first revision) |
| 1258 : 1987 | Specification for bayonet lamp holders (third revision) | (Part 4) : 1977 | Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision) |
| 1293 : 1988 | Specification for plugs and socket-outlets rated voltage up to and including 250 V and rated current up to and including 16 amperes (second revision) | 2667 : 1988 | Specification for fittings for rigid steel conduits for electrical wiring (second revision) |
| 1534 (Part 1) : 1977 | Specification for ballasts for fluorescent lamps: Part 1 For switch start circuits (second revision) | 2675 : 1983 | Specification for enclosed distribution fuseboards and cutouts for voltages not exceeding 1 000 V (second revision) |
| 1554 (Part 1) : 1988 | PVC insulated (heavy duty) electric cables: For working voltages upto and including 1 100 V (third revision) | 3287 : 1965 | Specification for industrial lighting fittings with plastic reflectors |
| (Part 2) : 1988 | For working voltages from 3.3 kV upto and including 11 kV (second revision) | 3324 : 1982 | Specification for bi-pin lamp holders for tubular fluorescent lamps (first revision) |
| 1777 : 1978 | Specification for industrial luminaire with metal reflectors (first revision) | ||
1237 : 1980 Specification for cement concrete flooring tiles (first revision)
13801 : 1993 Specification for chequered cement concrete tiles
657 : 1982 Specification for materials for use in the manufacture of magnesium oxychloride flooring compositions (second revision)
9162 : 1979 Methods of tests for epoxy resin, hardeners and epoxy resin composition for floor topping
9197 : 1979 Specification for epoxy resin, hardness and epoxy resin compositions for floor topping
10132 : 1982 Method of test for materials for use in the preparation of magnesium oxychloride flooring composition
653 : 1992 Specification for linoleum sheets and tiles (third revision)
9704 : 1980 Methods of tests for linoleum sheets and tiles
809 : 1992 Specification for rubber flooring materials for general purposes (second revision)
1195 : 2002 Specification for bitumen mastic for flooring (third revision)
8374 : 1977 Specification for bitumen mastic, anti-static and electrically conducting grade
9510 : 1980 Specification for bitumen mastic acid resisting grade
13026 : 1991 Specification for bitumen mastic for flooring for industries handling LPG and other light hydrocarbon products
15194 : 2002 Specification for pitch-mastic flooring for industries handling
IS No. Title heavy hydrocarbon products like kerosene, diesel and furnace oil
3461 : 1980 Specification for PVC asbestos floor tiles (first revision)
3462 : 1986 Specification for unbacked flexible PVC flooring (second revision)
3464 : 1986 Methods of test for plastic flooring and wall tiles (second revision)
2333 : 1992 Specification for plaster of Paris for ceramic industry (second revision)
4457 : 1982 Specification for ceramic unglazed vitreous acid resisting tile (first revision) 13630 Method of test for ceramic tiles:
(Part 1) : 1993 Determination of dimensions and surface quality
(Part 2) : 1992 Determination of water absorption
(Part 3) : 1992 Determination of moisture expansion using boiling water — Unglazed tiles
(Part 4) : 1992 Determination of linear thermal expansion
(Part 5) : 1992 Determination of resistance to thermal shock
(Part 6) : 1993 Determination of modulus of rupture
(Part 7) : 1993 Determination of chemical resistance — Unglazed tiles
(Part 8) : 1993 Determination of chemical resistance — Glazed tiles
(Part 9) : 1993 Determination of crazing resistance — Glazed tiles
(Part 10) : 1993 Determination of frost resistance
(Part 11) : 1993 Determination of resistance to surface abrasion — Glazed tiles
(Part 12) : 1993 Determination of resistance to deep abrasion — Unglazed tiles
(Part 13) : 1993 Determination of scratch hardness of surface according to Mohs
13711 : 1993 Sampling and basis for acceptance of ceramic tiles
13753 : 1993 Specification for dust pressed ceramic tiles with water absorption of E > 10% Group (B III)
13754 : 1993 Specification for dust pressed ceramic tiles with water absorption of 6% < E < 10% Group (B II b)
IS No. Title
13755 : 1993 Specification for dust pressed ceramic tiles with water absorption of 3% < E < 6% Group (B II a)
13756 : 1993 Specification for dust pressed ceramic tiles with water absorption of E < 3% Group B I
4456 Methods of test for chemical resistant mortars:
(Part 1) : 1967 Silicate type and resin type
(Part 2) : 1967 Sulphur type
4457 : 1982 Specification for ceramic unglazed vitreous acid resisting tile (first revision)
4832 Specification for chemical resistant mortars:
(Part 1) : 1969 Silicate type
(Part 2) : 1969 Resin type
(Part 3) : 1968 Sulphur type
4860 : 1968 Specification for acid resistant bricks
277 : 1992 Specification for galvanized steel sheets (plain and corrugated (fifth revision)
459 : 1992 Specification for corrugated and semi-corrugated asbestos cement sheets (third revision)
654 : 1992 Specification for clay roofing tiles, Mangalore pattern (third revision)
1464 : 1992 Specification for clay ridge and ceiling tiles (second revision)
2690 Specification for burnt clay flat terracing tiles:
(Part 1) : 1993 Machine made (second revision)
(Part 2) : 1992 Hand-made (second revision) 3951 Specification for hollow clay tiles for floor and roofs:
(Part 1) : 1975 Filler type (first revision)
(Part 2) : 1975 Structural type (first revision)
10388 : 1982 Specification for corrugated coir wood wool cement roofing sheets
12583 : 1988 Specification for corrugated bitumen roofing sheets
12866 : 1989 Specification for plastic translucent sheets made from thermosetting polyester resin (glass fibre reinforced)
IS No. Title
13317 : 1992 Specification for clay roofing camty tiles, half round and flat tiles
1542 : 1992 Specification for sand for plaster (second revision)
4456 Methods of test for chemical resistant mortars:
(Part 1) : 1967 Silicate type and resin type
(Part 2) : 1967 Sulphur type 4832 Specification for chemical resistant mortars:
(Part 1) : 1969 Silicate type
(Part 2) : 1969 Resin type
(Part 3) : 1968 Sulphur type
15418 : 2003 Specification for finished wall papers, wall vinyls and plastic wall coverings in roll form
2553 Specification for safety glass: (Part 1) : 1990 Part 1 General purpose (third revision)
2835 : 1987 Specification for flat transparent sheet glass (third revision)
3438 : 1994 Specification for silvered glass mirrors for general purposes (second revision)
5437 : 1994 Specification for figured rolled and wired glass (first revision)
14900 : 2000 Specification for transparent float glass
712 : 1984 Specification for building limes (third revision)
1624 : 1986 Method of field testing of building lime (first revision)
2686 : 1977 Specification for cinder as fine aggregates for use in lime concrete (first revision)
3068 : 1986 Specification for broken brick (burnt-clay) coarse aggregates for use in lime concrete (second revision)
3115 : 1992 Specification for lime based blocks (second revision)
3182 : 1986 Specification for broken bricks (burnt clay) fine aggregates for use in lime mortar (second revision)
4098 : 1983 Specification for lime-pozzolana mixture (first revision)
4139 : 1989 Specification for calcium silicate bricks (second revision)
6932 Method of tests for building limes: (Part 1) : 1973 Determination of insoluble residue, loss on ignition, insoluble matter, silicon dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide
(Part 2) : 1973 Determination of carbon dioxide content
(Part 3) : 1973 Determination of residue on slaking of quicklime
(Part 4) : 1973 Determination of fineness of hydrated lime
(Part 5) : 1973 Determination of unhydrated oxide
| IS No. | Title | IS No. | Title |
| (Part 6):1973 | Determination of volume yield of quicklime | 6165:1992 | Dimensions for special shapes of clay bricks (first revision) |
| (Part 7):1973 | Determination of compressive and transverse strength | 11650:1991 | Guide for manufacture of common burnt clay building bricks by semi-mechanized process (first revision) |
| (Part 8):1973 | Determination of workability | ||
| (Part 9):1973 | Determination of soundness | 13757:1993 | Specification for burnt clay fly ash building bricks |
| (Part 10):1973 | Determination of popping and pitting of hydrated lime | d) Jallies | |
| (Part 11):1984 | Determination of setting time of hydrated lime | 7556:1988 | Specification for burnt clay jallies (first revision) |
| 10360:1982 | Specification for lime pozzolana concrete blocks for paving | e) Tiles | |
| 10772:1983 | Specification for quick setting lime pozzolana mixture | 654:1992 | Specification for clay roofing tiles, Mangalore pattern (third revision) |
| 12894:2002 | Specification for pulverized fuel ash lime bricks (first revision) | 1464:1992 | Specification for clay ridge and ceiling tiles (second revision) |
| 6. BURNT CLAY PRODUCTS | 6. BURNT CLAY PRODUCTS | 1478:1992 | Specification for clay flooring tiles (second revision) |
| a) Blocks | 2690 | Specification for burnt clay flat terracing tiles: | |
| 3952:1988 | Specification for burnt hollow bricks for walls and partitions (second revision) | (Part 1):1993 | Machine made (second revision) |
| 3952:1988 | Specification for burnt hollow bricks for walls and partitions (second revision) | (Part 2):1992 | Handmade (second revision) |
| b) Soil-Based Products | b) Soil-Based Products | 3367:1993 | Specification for burnt clay tiles for use in lining irrigation and drainage works (second revision) |
| 1725:1982 | Specification for soil-based blocks used in general building construction | 3951 | Specification for hollow clay tiles for floor and roofs: |
| c) Bricks | |||
| 1077:1992 | Specification for common burnt clay building bricks (fifth revision) | (Part 1):1975 | Filler type (first revision) |
| 1077:1992 | Specification for common burnt clay building bricks (fifth revision) | (Part 2):1975 | Structural type (first revision) |
| 2117:1991 | Guide for manufacture of hand-made-common burnt clay building bricks (third revision) | 13317:1992 | Specification for clay roofing camty tiles, half round and flat tiles |
| 2180:1988 | Specification for heavy duty burnt clay building bricks (third revision) | 7. CEMENT AND CONCRETE (including concrete reinforcement) | 7. CEMENT AND CONCRETE (including concrete reinforcement) |
| 2222:1991 | Specification for burnt clay perforated building bricks (fourth revision) | a) Aggregates | |
| 2691:1988 | Specification for burnt clay facing bricks (second revision) | 383:1970 | Specification for coarse and fine aggregates from natural sources for concrete (second revision) |
| 3495(Parts 1 to 4):1992 | Methods of test of burnt clay building bricks (third revision) | 1542:1992 | Specification for sand for plaster (second revision) |
| 3583:1988 | Specification for burnt clay paving bricks (second revision) | 2116:1980 | Specification for sand for masonry mortars (first revision) |
| 4885:1988 | Specification for sewer bricks (first revision) | 2386 | Methods of test for aggregates for concrete: |
| 5454:1978 | Methods for sampling of clay building bricks | (Part 1):1963 | Particle size and shape |
| 5779:1986 | Specification for burnt clay soling bricks (first revision) | (Part 2):1963 | Estimation of deleterious materials and organic impurities |
| (Part 3):1963 | Specific gravity, density, voids, absorption and bulking | ||
| IS No. | Title | IS No. | Title |
| (Part 4):1963 | Mechanical properties | 3812 | Specification for pulverized fuel ash: |
| (Part 5):1963 | Soundness | Specification for pulverized fuel ash: | |
| (Part 6):1963 | Measuring mortar making properties of fine aggregates | (Part 1):2003 | For use as pozzolana in cement, cement mortar and concrete (second revision) |
| (Part 7):1963 | Alkali aggregate reactivity | For use as pozzolana in cement, cement mortar and concrete (second revision) | |
| (Part 8):1963 | Petrographic examination | (Part 2):2003 | For use as admixture in cement mortar and concrete (second revision) |
| 2430:1986 | Methods of sampling of aggregates of concrete (first revision) | For use as admixture in cement mortar and concrete (second revision) | |
| 6579:1981 | Specification for coarse aggregate for water bound macadam (first revision) | 6491:1972 | Method of sampling of flyash |
| 6579:1981 | Specification for coarse aggregate for water bound macadam (first revision) | 6925:1973 | Methods of test for determination of water soluble chlorides in concrete admixtures |
| 9142:1979 | Specification for artificial lightweight aggregates for concrete masonry units | 9103:1999 | Specification for admixtures for concrete (first revision) |
| b) Cement | 12089:1987 | Specification for granulated slag for manufacture of Portland slag cement | |
| 269:1989 | Specification for ordinary portland cement, 33 Grade (fourth revision) | Specification for granulated slag for manufacture of Portland slag cement | |
| 455:1989 | Specification for Portland slag cement (fourth revision) | 12870:1989 | Methods of sampling calcined clay pozzolana |
| 1489 | Specification for Portland pozzolana cement: | 15388:2003 | Specification for silica fume |
| 1489 | Specification for Portland pozzolana cement: | d) Concrete | |
| (Part 1):1991 | Flyash based (third revision) | 456:2000 | Code of practice for plain and reinforced concrete (fourth revision) |
| (Part 2):1991 | Calcined clay based (third revision) | Code of practice for plain and reinforced concrete (fourth revision) | |
| 3466:1988 | Specification for masonry cement (second revision) | 1343:1980 | Code of practice for prestressed concrete (first revision) |
| 6452:1989 | Specification for high alumina cement for structural use (first revision) | 4926:2003 | Code of practice for ready-mixed concrete (third revision) |
| 6909:1990 | Specification for supersulphated cement | e) Cement and Concrete Sampling and Methods of Test | |
| 8041:1990 | Specification for rapid hardening Portland cement (second revision) | 516:1959 | Methods of test for strength of concrete |
| 8042:1989 | Specification for white Portland cement (second revision) | 1199:1959 | Methods of sampling and analysis of concrete |
| 8043:1991 | Specification for hydrophobic Portland cement (second revision) | 2770 | Methods of testing bond in reinforced concrete: Part 1 Pullout test |
| 8112:1989 | Specification for 43 grade ordinary Portland cement (first revision) | (Part 1):1967 | Methods of testing bond in reinforced concrete: Part 1 Pullout test |
| 12269:1987 | Specification for 53 grade ordinary Portland cement | 3085:1965 | Methods of test for permeability of cement mortar and concrete |
| 12330:1988 | Specification for sulphate resisting Portland cement | 3535:1986 | Methods of sampling hydraulic cement (first revision) |
| 12600:1989 | Specification for low heat Portland cement | 4031 | Methods of physical tests for hydraulic cement: |
| c) Mineral/Chemical Admixtures and Pozzolanas | c) Mineral/Chemical Admixtures and Pozzolanas | (Part 1):1996 | Determination of fineness by dry sieving (second revision) |
| 1344:1981 | Specification for calcined clay pozzolana (second revision) | (Part 2):1999 | Determination of fineness by specific surface by Blaine air permeability method (second revision) |
| 1727:1967 | Methods of test for pozzolanic materials (first revision) | Determination of fineness by specific surface by Blaine air permeability method (second revision) |
IS No. Title
(Part 3) : 1988 Determination of soundness (first revision)
(Part 4) : 1988 Determination of consistency of standard cement paste (first revision)
(Part 5) : 1988 Determination of initial and final setting times (first revision)
(Part 6) : 1988 Determination of compressive strength of hydraulic cement (other than masonry cement) (first revision)
(Part 7) : 1988 Determination of compressive strength of masonry cement (first revision)
(Part 8) : 1988 Determination of transverse and compressive strength of plastic mortar using prism (first revision)
(Part 9) : 1988 Determination of heat of hydration (first revision)
(Part 10) : 1988 Determination of drying shrinkage (first revision)
(Part 11) : 1988 Determination of density (first revision)
(Part 12) : 1988 Determination of air content of hydraulic cement mortar (first revision)
(Part 14) : 1989 Determination of false set
(Part 15) : 1991 Determination of fineness by wet sieving
4032 : 1985 Methods of chemical analysis for hydraulic cement (first revision)
5816 : 1999 Method of test for splitting tensile strength of concrete (first revision)
8142 : 1976 Methods of test for determining setting time of concrete by penetration resistance
9013 : 1978 Method of making, curing and determining compressive strength of accelerated cured concrete test specimens
9284 : 1979 Method of test for abrasion resistance of concrete
12423 : 1988 Methods for colorometric analysis of hydraulic cement
12803 : 1989 Methods of analysis of hydraulic cement by X-ray fluorescence spectrometer
IS No. Title
12813 : 1989 Method of analysis of hydraulic cement by atomic absorption spectrophotometer
13311 Methods of non-destructive testing of concrete:
(Part 1) : 1992 Ultrasonic pulse velocity
(Part 2) : 1992 Rebound hammer
1834 : 1984 Specification for hot applied sealing compound for joint in concrete (first revision)
1838 Specification for preformed fillers for expansion joint in concrete pavements and structures (non-extruding and resilient type):
(Part 1) : 1983 Bitumen impregnated fibre (first revision)
(Part 2) : 1984 CNSL aldehyde resin and coconut pith
10566 : 1983 Methods of test for preformed fillers for expansion joints in concrete paving and structural construction
11433 Specification for one grade polysulphide based joint sealant:
(Part 1) : 1985 General requirements
(Part 2) : 1986 Methods of test
12118 Specification for two parts polysulphide based sealants:
(Part 1) : 1987 General requirements
(Part 2) : 1987 Methods of test
432 Specification for mild steel and medium tensile steel bars and hard drawn steel wire for concrete reinforcement:
(Part 1) : 1982 Mild steel and medium tensile steel bars (third revision)
(Part 2) : 1982 Hard drawn steel wire (third revision)
1566 : 1982 Specification for hard drawn steel wire fabric for concrete reinforcement (second revision)
1608 : 1995 Mechanical testing of materials — Tensile testing
1785 Specification for plain hard drawn steel wire for prestressed concrete:
| IS No. | Title | IS No. | Title |
| (Part 1): 1983 | Cold drawn stress-relieved wire (second revision) | 6073: 1971 | Specification for autoclaved reinforced cellular concrete floor and roof slabs |
| (Part 2): 1983 | As drawn wire (first revision) | ||
| 1786: 1985 | Specification for high strength deformed steel bars and wires for concrete reinforcement (third revision) | 6441 | Methods of test for autoclaved cellular concrete products: |
| (Part 1): 1972 | Determination of unit weight or bulk density and moisture content | ||
| 2090: 1983 | Specification for high tensile steel bars used in prestressed concrete (first revision) | (Part 2): 1972 | Determination of drying shrinkage |
| (Part 4): 1972 | Corrosion protection of steel reinforcement in autoclaved cellular concrete | ||
| 6003: 1983 | Specification for indented wire for prestressed concrete (first revision) | (Part 5): 1972 | Determination of compressive strength |
| 6006: 1983 | Specification for uncoated stress-relieved strand for prestressed concrete (first revision) | (Part 6): 1973 | Strength, deformation and cracking of flexural members subject to bending-short duration loading test |
| 10790 | Methods of sampling of steel for prestressed and reinforced concrete: | (Part 7): 1973 | Strength, deformation and cracking of flexural members subject to bending-sustained loading test |
| (Part 1): 1984 | Prestressing steel | (Part 8): 1973 | Loading tests for flexural members in diagonal tension |
| (Part 2): 1984 | Reinforcing steel | ||
| 13620: 1993 | Specification for fusion bonded epoxy coated reinforcing bars | (Part 9): 1973 | Jointing of autoclaved cellular concrete elements |
14862 : 2000 Specification for fibre cement flat sheets
14871 : 2000 Specification for products in fibre reinforced cement long corrugated or asymmetrical section sheets and fittings for roofing and cladding
iv) Concrete Pipes and Pipes Lined/Coated with Concrete or Mortar
458 : 2003 Specification for precast concrete pipes (with and without reinforcement) (fourth revision)
784 : 2001 Specification for prestressed concrete pipes (including specials) (second revision)
1916 : 1989 Specification for steel cylinder pipe with concrete lining and coating (first revision)
3597 : 1998 Methods of test for concrete pipes (second revision)
4350 : 1967 Specification for concrete porous pipes for under drainage
7319 : 1974 Specification for perforated concrete pipes
7322 : 1985 Specification for specials for steel cylinder reinforced concrete pipes (first revision)
15155 : 2002 Specification for bar/wire wrapped steel cylinder pipe with mortar lining and coating
1998 : 1962 Methods of test for thermosetting synthetic resin bonded laminated sheets
2036 : 1995 Specification for phenolic laminated sheets (second revision)
2046 : 1995 Specification for decorative thermosetting synthetic resin bonded laminated sheets (second revision)
| IS No. | Title | IS No. | Title |
| 212 : 1983 | Specification for crude coal tar for general use (second revision) | 1218 : 1978 | Determination of phenols (first revision) |
| 215 : 1995 | Specification for road tar (third revision) | 1219 : 1978 | Determination of naphthalene (first revision) |
| 216 : 1961 | Specification for coal tar pitch (first revision) | 1220 : 1978 | Determination of volatile matter content (first revision) |
| 217 : 1988 | Specification for cutback bitumen (second revision) | 3117 : 2004 | Specification for bitumen emulsion for roads (anionic type) (first revision) |
| 218 : 1983 | Specification for creosote oil for use as wood preservatives (second revision) | 8887 : 2004 | Specification for bitumen emulsion for roads (cationic type) (second revision) |
| 454 : 1994 | Specification for cutback bitumen from waxy crude (second revision) | ||
| 702 : 1988 | Specification for industrial bitumen (second revision) | 9381 : 1979 | Methods for testing tar and bituminous materials: Determination of FRAASS breaking point of bitumen |
| 1201 to 1220 | Methods for testing tar and bituminous materials | ||
| 1201 : 1978 | Sampling (first revision) | 9382 : 1979 | Methods for testing tar and bituminous materials: Determination of effect of heat and air by thin film oven test |
| 1202 : 1978 | Determination of specific gravity (first revision) | ||
| 1203 : 1978 | Determination of penetration (first revision) | 10511 : 1983 | Method for determination of asphaltenes in bitumen by precipitation with normal haptane |
| 1204 : 1978 | Determination of residue of specified penetration (first revision) | ||
| 1205 : 1978 | Determination of softening point (first revision) | 10512 : 2003 | Method for determination of wax content in bitumen (first revision) |
| 1206 (Part 1) : 1978 | Determination of viscosity: Industrial viscosity (first revision) | 13758 (Part 1) : 1993 | Coal tar pitch: Determination of matter insoluble in quinoline |
| (Part 2) : 1978 | Absolute viscosity (first revision) | (Part 2) : 1993 | Determination of coking value |
| (Part 3) : 1978 | Kinematic viscosity (first revision) | 15172 : 2002 | Methods for testing tar and bituminous materials — Determination of curing index for cutback bitumens |
| 1207 : 1978 | Determination of equiviscous temperature (EVT) (first revision) | ||
| 1208 : 1978 | Determination of ductility (first revision) | 15173 : 2002 | Methods for testing tars and bituminous materials — Determination of breaking point for cationic bitumen emulsion |
| 1209 : 1978 | Determination of flash point and fire point (first revision) | ||
| 1210 : 1978 | Float test (first revision) | 15174 : 2002 | Methods for testing tar and bituminous material — Determination of breaking point for anionic bitumen emulsion |
| 1211 : 1978 | Determination of water content (Dean and Stark method) (first revision) | ||
| 1212 : 1978 | Determination of loss of heating (first revision) | 15462 : 2004 | Specification for polymer and rubber modified bitumen |
| 1213 : 1978 | Distillation test (first revision) | ||
| 1215 : 1978 | Determination of matter insoluble in toluene (first revision) | 3. BUILDER'S HARDWARE | |
| 1216 : 1978 | Determination of solubility in carbon disulphide or trichloroethylene (first revision) | 204 (Part 1) : 1991 | Specification for tower bolts: Ferrous metals (fifth revision) |
| (Part 2) : 1992 | Non-ferrous metals (fifth revision) | ||
| 1217 : 1978 | Determination of mineral matter (ASH) (first revision) | 205 : 1992 | Specification for non-ferrous metal butt hinges (fourth revision) |
| IS No. | Title | IS No. | Title |
| 206 : 1992 | Specification for tee and strap hinges (fourth revision) | 4992 : 1975 | Specification for door handles for mortice locks (vertical type) (first revision) |
| 208 : 1996 | Specification for door handles (fifth revision) | 5187 : 1972 | Specification for flush bolts (first revision) |
| 281 : 1991 | Specification for mild steel sliding door bolts for use with padlock (third revision) | 5899 : 1970 | Specification for bathroom latches |
| 5930 : 1970 | Specification for mortice latch (vertical type) | ||
| 362 : 1991 | Specification for parliament hinges (fifth revision) | 6315 : 1992 | Specification for floor springs (hydraulically regulated) for heavy doors (second revision) |
| 363 : 1993 | Specification for hasps and staples (fourth revision) | ||
| 364 : 1993 | Specification for fanlight catch (third revision) | 6318 : 1971 | Specification for plastic window stays and fasteners |
| 452 : 1973 | Specification for door springs, rat-tail type (second revision) | 6343 : 1982 | Specification for door closers (pneumatically regulated) for light door weighing up to 40 kg (first revision) |
| 453 : 1993 | Specification for double-acting spring hinges (third revision) | ||
| 729 : 1979 | Specification for drawer locks, cupboard locks and box locks (third revision) | 6607 : 1972 | Specification for rebated mortice locks (vertical type) |
| 7196 : 1974 | Specification for hold fast | ||
| 1019 : 1974 | Specification for rim latches (second revision) | 7197 : 1974 | Specification for double action floor springs (without oil check) for heavy doors |
| 1341 : 1992 | Specification for steel butt hinges (sixth revision) | 7534 : 1985 | Specification for sliding locking bolts for use with padlocks (first revision) |
| 1823 : 1980 | Specification for floor door stoppers (third revision) | ||
| 1837 : 1966 | Specification for fanlight pivots (first revision) | 7540 : 1974 | Specification for mortice dead locks |
| 2209 : 1976 | Specification for mortice locks (vertical type) (third revision) | 8756 : 1978 |
IS No. Title
632 : 1978 Specification for gamma-BHC (lindane) emulsifiable concentrates (fourth revision)
8944 : 1978 Specification for chlorpyrifos emulsifiable concentrates
2645 : 2003 Specification for integral waterproofing compounds for cement mortar and concrete (second revision)
6925 : 1973 Methods of test for determination of water soluble chlorides in concrete admixtures
9103 : 1999 Specification for concrete admixtures (first revision)
1834 : 1984 Specification for hot applied sealing compound for joint in concrete (first revision)
1838 Specification for preformed fillers for expansion joint in concrete pavements and structures (non-extruding and resilient type):
(Part 1) : 1983 Bitumen impregnated fibre (first revision)
(Part 2) : 1984 CNSL aldehyde resin and coconut pith 11433 Specification for one grade
(Part 1) : 1985 polysulphide based joint sealant: Part 1 General requirements
12118 Specification for two parts polysulphide based sealants:
(Part 2) : 1987 Methods of test
848 : 1974 Specification for synthetic resin adhesives for plywood (phenolic and aminoplastic) (first revision)
849 : 1994 Specification for cold setting case in glue for wood (first revision)
851 : 1978 Specification for synthetic resin adhesives for construction work (non-structural) in wood (first revision)
852 : 1994 Specification for animal glue for general wood-working purposes (second revision)
4835 : 1979 Specification for polyvinyl acetate dispersion-based adhesives for wood (first revision)
9188 : 1979 Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition
12830 : 1989 Rubber based adhesives for fixing PVC tiles to cement
12994 : 1990 Epoxy adhesives, room temperature curing general purpose
Every material used in fulfilment of the requirements of this Part, unless otherwise specified in the Code or approved, shall conform to the relevant Indian Standards. A list of Indian Standards as the ‘accepted standards’ is given at the end of this Part of the Code. At the time of publication of the Code, the editions indicated were valid. All standards are subject to amendments and revisions. The Authority shall take cognizance of such amendments and revisions. The latest version of a standard shall, as far as possible, be adopted at the time of enforcement of this Part of the Code.
| 3419 : 1989 |
| Specification for fittings for rigid non-metallic conduits (second revision) |
| 2086 : 1993 | Specification for carriers and bases used in re-wirable type electric fuses up to 650 V (third revision) | 3480 : 1966 | Specification for flexible steel conduits for electrical wiring |
| 2148 : 2004 | Specification for flameproof enclosures “d” for electrical apparatus for explosive gas atmospheres (third revision) | 3528 : 1966 | Specification for waterproof electric lighting fittings |
| 2206 | Specification for flameproof electric lighting fittings: Well glass and bulkhead types (first revision) | 3553 : 1966 | Specification for watertight electric lighting fittings |
| (Part 1) : 1984 | Fittings using glass tubes | 3837 : 1976 | Specification for accessories for rigid steel conduits for electrical wiring (first revision) |
| (Part 2) : 1976 | Fittings using fluorescent lamps and plastic covers | 3854 : 1997 | Specification for switches for domestic and similar purposes (second revision) |
| (Part 3) : 1989 | Fittings using fluorescent lamps and plastic covers | 4012 : 1967 | Specification for dust-proof electric lighting fittings |
| (Part 4) : 1987 | Portable flame-proof handlamps and approved flexible cables | 4013 : 1967 | Specification for dust-tight electric lighting fittings |
| IS No. | Title | IS No. | Title |
| 4160 : 1967 | Specification for interlocking switch socket outlet | (Part 5/Sec 5) : 1987 | Particular requirements, Section 5 Flood light |
| 4615 : 1968 | Specification for switch socket outlets (non-interlocking type) | 11037 : 1984 | Electronic type fan regulators |
| 13010 : 2002 | AC watt-hour meters, Class 0.5, 1 and 2 (first revision) | ||
| 4649 : 1968 | Specification for adaptors for flexible steel conduits | 13779 : 1999 | AC static watthour meters (Class 1 and 2) (first revision) |
| 5077 : 1969 | Specification for decorative lighting outfits | 13947 | Specification for low-voltage switchgear and controlgear: Part 3 Switches, disconnectors, switch disconnectors and fuse combination units |
| 6538 : 1971 | Specification for three-pin plugs made of resilient material | (Part 3) : 1993 | |
| 8030 : 1976 | Specification for luminaires for hospitals | ||
| 8828 : 1996 | Specification for circuit-breakers for over current protection for household and similar installation (second revision) | 14763 : 2000 | Conduit for electrical purposes, outside diameters of conduits for electrical installations and threads for conduits and fittings |
| 9537 | Specification for conduits for electrical installations: | 14768 | Conduit fittings for electrical installations: |
| (Part 1) : 1980 | General requirements | (Part 1) : 2000 | General requirements |
| (Part 2) : 1981 | Rigid steel conduits | (Part 2) : 2003 | Metal conduit fittings |
| (Part 3) : 1983 | Rigid plain conduits for insulating materials | 14772 : 2000 | Enclosures for accessories for household and similar fixed electrical installations |
| (Part 4) : 1983 | Pliable self-recovering conduits for insulating materials | 14927 | Cable trunking and ducting systems for electrical installations |
| (Part 5) : 2000 | Pliable conduits of insulating materials | (Part 1) : 2001 | General requirements |
| (Part 6) : 2000 | Pliable conduits of metal or composite materials | (Part 2) : 2001 | Cable trunking and ducting systems intended for mounting on walls or ceilings |
| (Part 8) : 2003 | Rigid non-threadable conduits of aluminium alloy | 14930 | Conduit systems for electrical installations: |
| 9926 : 1981 | Specification for fuse wires used in rewirable type electric fuses up to 650 V | (Part 1) : 2001 | General requirements |
| (Part 2) : 2001 | Particular requirements for conduit system buried underground | ||
| 10322 | Specification for luminaires: | 15368 : 2003 | Cable reels for household and similar purposes |
| (Part 1) : 1982 | General requirements | ||
| (Part 2) : 1982 | Constructional requirements | 12. FILLERS, STOPPERS AND PUTTIES | |
| (Part 3) : 1984 | Screw and screwless terminations | ||
| (Part 4) : 1984 | Methods of tests | 110 : 1983 | Specification for ready mixed paint, brushing, grey filler, for enamels, for use over primers (first revision) |
| (Part 5/Sec 1) : 1985 | Particular requirements, Section 1 General purpose luminaires | ||
| (Part 5/Sec 2) : 1985 | Particular requirements, Section 2 Recessed luminaires | 419 : 1967 | Specification for putty for use on window frames (first revision) |
| (Part 5/Sec 3) : 1987 | Particular requirements, Section 3 Luminaires for road and street lighting | 423 : 1961 | Specification for plastic wood, for joiner's filler (revised) |
| (Part 5/Sec 4) : 1987 | Particular requirements, Section 4 Portable general purpose luminaires | 3709 : 1966 | Specification for mastic cement for bedding of metal windows |
| 7164 : 1973 | Specification for stopper | ||
IS No. Title
13184 : 1991 Specification for mastic filler, epoxy based
| 14268: 1995 | Specification for uncoated stress relieved low relaxation seven ply strand for prestressed concrete | 6523: 1983 | Specification for precast reinforced concrete door and window frames (first revision) |
| 8. COMPOSITE MATRIX PRODUCTS | 9872: 1981 | Specification for precast concrete septic tanks | |
| a) Cement Matrix Products | 9893: 1981 | Specification for precast concrete blocks for lintels and sills | |
| i) Precast Concrete Products | |||
| 2185 | Specification for concrete masonry units: | 12440: 1988 | Specification for precast concrete stone masonry blocks |
| (Part 1): 1979 | Hollow and solid concrete blocks (second revision) | 12592: 2002 | Specification for precast concrete manhole covers and frames (first revision) |
| (Part 2): 1983 | Hollow and solid lightweight concrete blocks (first revision) | 13356: 1992 | Specification for precast ferrocement water tanks (250 to 10 000 litres capacity) |
| (Part 3): 1984 | Autoclaved cellular (aerated) concrete blocks (first revision) | 13990: 1994 | Specification for precast reinforced concrete planks and joists for flooring and roofing |
| 4996: 1984 | Specification for reinforced concrete fence posts (first revision) |
| 5751: 1984 | Specification for precast concrete coping blocks (first revision) | 14143: 1994 | Specification for prefabricated brick panel and partially precast concrete joist for flooring and roofing |
| 5758: 1984 | Specification for precast concrete kerbs (first revision) |
| 5820: 1970 | Specification for precast concrete cable covers | 14201: 1994 | Specification for precast reinforced concrete channel unit for construction of floors and roofs |
| 6072: 1971 | Specification for autoclaved reinforced cellular concrete wall slabs | 14241: !994 | Specification for precast L-Panel units for roofing |
IS No. Title
ii) Asbestos Fibre Cement Products
459 : 1992 Specification for corrugated and semi-corrugated asbestos cement sheets (third revision)
1592 : 2003 Specification for asbestos cement pressure pipes and joints (fourth revision)
1626 Specification for asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fittings:
(Part 1) : 1994 Pipes and pipe fittings (second revision)
(Part 2) : 1994 Gutters and gutter fittings (second revision)
(Part 3) : 1994 Roofing fittings (second revision)
2096 : 1992 Specification for asbestos cement flat sheets (first revision)
2098 : 1997 Specification for asbestos cement building boards (first revision)
5913 : 2003 Methods of test for asbestos cement products (second revision)
6908 : 1991 Specification for asbestos cement pipes and fittings for sewerage and drainage (first revision)
7639 : 1975 Method of sampling asbestos cement products
9627 : 1980 Specification for asbestos cement pressure pipes (light duty)
13000 : 1990 Silica-asbestos-cement flat sheets — Specification
13008 : 1990 Specification for shallow corrugated asbestos cement sheets
| Specification for ball catches for use in wooden almirah |
| 2681 : 1993 | Specification for non-ferrous metal sliding door bolts for use with padlocks (third revision) | 8760 : 1978 | Specification for mortice sliding door locks, with lever mechanism |
| 9106 : 1979 | Specification for rising butt hinges |
| 3564 : 1995 | Specification for door closers (hydraulically regulated) (second revision) | 9131 : 1979 | Specification for rim locks |
| 9460 : 1980 | Specification for flush drop handle for drawer |
| 3818 : 1992 | Specification for continuous (piano) hinges (third revision) | 9899 : 1981 | Specification for hat coat and wardrobe hooks |
| 3828 : 1966 | Specification for ventilator chains | 10019 : 1981 | Specification for mild steel stays and fasteners |
| 3843 : 1995 | Specification for steel backflap hinges (first revision) | 10090 : 1982 | Specification for numericals |
| 3847 : 1992 | Specification for mortice night latches (first revision) | 10342 : 1982 | Specification for curtain rail system |
| 12817 : 1997 | Specification for stainless steel butt hinges (first revision) |
| 4621 : 1975 | Specification for indicating bolts for use in public baths and lavatories (first revision) | 12867 : 1989 | Specification for PVC hand rails covers |
| 4948 : 2002 | Specification for welded steel wire fabric for general use (second revision) | 14912 : 2001 | Specification for door closers concealed type (hydraulically regulated) |