This Part of the Code covers the requirements of building materials and components, and criteria for accepting new or alternative building materials and components.
Part 5Building Materials
b) The list at the end of this part has been completely reclassified to make it more user friendly and updated to reflect the latest available Indian Standard and methods of test.
A reference to SP 21 ‘Summaries of Indian Standards for building materials’ may be useful. This publication gives the summaries of Indian Standards covering various building materials, fittings and components except standards relating to paints.
All standards cross-referred to in the main text of this Part, are subject to revision. The parties to agreement based on this section are encouraged to investigate the possibility of applying the most recent editions of the standards.
2Materials
Every material used in fulfilment of the requirements of this Part, unless otherwise specified in the Code or approved, shall conform to the relevant Indian Standards. A list of Indian Standards as the ‘accepted standards’ is given at the end of this Part of the Code. At the time of publication of the Code, the editions indicated were valid. All standards are subject to amendments and revisions. The Authority shall take cognizance of such amendments and revisions. The latest version of a standard shall, as far as possible, be adopted at the time of enforcement of this Part of the Code.
29Wire Ropes and Wire Products
ALUMINIUM AND OTHER LIGHT METALS AND THEIR ALLOYS
IS No.
Title
IS No.
Title
212 : 1983
Specification for crude coal tar for general use (second revision)
1218 : 1978
Determination of phenols (first revision)
215 : 1995
Specification for road tar (third revision)
1219 : 1978
Determination of naphthalene (first revision)
216 : 1961
Specification for coal tar pitch (first revision)
1220 : 1978
Determination of volatile matter content (first revision)
217 : 1988
Specification for cutback bitumen (second revision)
3117 : 2004
Specification for bitumen emulsion for roads (anionic type) (first revision)
218 : 1983
Specification for creosote oil for use as wood preservatives (second revision)
8887 : 2004
Specification for bitumen emulsion for roads (cationic type) (second revision)
454 : 1994
Specification for cutback bitumen from waxy crude (second revision)
702 : 1988
Specification for industrial bitumen (second revision)
9381 : 1979
Methods for testing tar and bituminous materials: Determination of FRAASS breaking point of bitumen
1201 to 1220
Methods for testing tar and bituminous materials
1201 : 1978
Sampling (first revision)
9382 : 1979
Methods for testing tar and bituminous materials: Determination of effect of heat and air by thin film oven test
1202 : 1978
Determination of specific gravity (first revision)
1203 : 1978
Determination of penetration (first revision)
10511 : 1983
Method for determination of asphaltenes in bitumen by precipitation with normal haptane
1204 : 1978
Determination of residue of specified penetration (first revision)
1205 : 1978
Determination of softening point (first revision)
10512 : 2003
Method for determination of wax content in bitumen (first revision)
1206 (Part 1) : 1978
Determination of viscosity: Industrial viscosity (first revision)
13758 (Part 1) : 1993
Coal tar pitch: Determination of matter insoluble in quinoline
(Part 2) : 1978
Absolute viscosity (first revision)
(Part 2) : 1993
Determination of coking value
(Part 3) : 1978
Kinematic viscosity (first revision)
15172 : 2002
Methods for testing tar and bituminous materials — Determination of curing index for cutback bitumens
1207 : 1978
Determination of equiviscous temperature (EVT) (first revision)
1208 : 1978
Determination of ductility (first revision)
15173 : 2002
Methods for testing tars and bituminous materials — Determination of breaking point for cationic bitumen emulsion
1209 : 1978
Determination of flash point and fire point (first revision)
1210 : 1978
Float test (first revision)
15174 : 2002
Methods for testing tar and bituminous material — Determination of breaking point for anionic bitumen emulsion
1211 : 1978
Determination of water content (Dean and Stark method) (first revision)
1212 : 1978
Determination of loss of heating (first revision)
15462 : 2004
Specification for polymer and rubber modified bitumen
1213 : 1978
Distillation test (first revision)
1215 : 1978
Determination of matter insoluble in toluene (first revision)
3. BUILDER'S HARDWARE
1216 : 1978
Determination of solubility in carbon disulphide or trichloroethylene (first revision)
204 (Part 1) : 1991
Specification for tower bolts: Ferrous metals (fifth revision)
(Part 2) : 1992
Non-ferrous metals (fifth revision)
1217 : 1978
Determination of mineral matter (ASH) (first revision)
205 : 1992
Specification for non-ferrous metal butt hinges (fourth revision)
IS No.
Title
IS No.
Title
206 : 1992
Specification for tee and strap hinges (fourth revision)
4992 : 1975
Specification for door handles for mortice locks (vertical type) (first revision)
208 : 1996
Specification for door handles (fifth revision)
5187 : 1972
Specification for flush bolts (first revision)
281 : 1991
Specification for mild steel sliding door bolts for use with padlock (third revision)
5899 : 1970
Specification for bathroom latches
5930 : 1970
Specification for mortice latch (vertical type)
362 : 1991
Specification for parliament hinges (fifth revision)
6315 : 1992
Specification for floor springs (hydraulically regulated) for heavy doors (second revision)
363 : 1993
Specification for hasps and staples (fourth revision)
364 : 1993
Specification for fanlight catch (third revision)
6318 : 1971
Specification for plastic window stays and fasteners
452 : 1973
Specification for door springs, rat-tail type (second revision)
6343 : 1982
Specification for door closers (pneumatically regulated) for light door weighing up to 40 kg (first revision)
453 : 1993
Specification for double-acting spring hinges (third revision)
729 : 1979
Specification for drawer locks, cupboard locks and box locks (third revision)
6607 : 1972
Specification for rebated mortice locks (vertical type)
7196 : 1974
Specification for hold fast
1019 : 1974
Specification for rim latches (second revision)
7197 : 1974
Specification for double action floor springs (without oil check) for heavy doors
1341 : 1992
Specification for steel butt hinges (sixth revision)
7534 : 1985
Specification for sliding locking bolts for use with padlocks (first revision)
1823 : 1980
Specification for floor door stoppers (third revision)
1837 : 1966
Specification for fanlight pivots (first revision)
7540 : 1974
Specification for mortice dead locks
2209 : 1976
Specification for mortice locks (vertical type) (third revision)
(Part 2) : 1984 CNSL aldehyde resin and coconut pith 11433 Specification for one grade
(Part 1) : 1985 polysulphide based joint sealant: Part 1 General requirements
12118 Specification for two parts polysulphide based sealants:
(Part 2) : 1987 Methods of test
d) Adhesives
848 : 1974 Specification for synthetic resin adhesives for plywood (phenolic and aminoplastic) (first revision)
849 : 1994 Specification for cold setting case in glue for wood (first revision)
851 : 1978 Specification for synthetic resin adhesives for construction work (non-structural) in wood (first revision)
852 : 1994 Specification for animal glue for general wood-working purposes (second revision)
4835 : 1979 Specification for polyvinyl acetate dispersion-based adhesives for wood (first revision)
9188 : 1979 Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition
12830 : 1989 Rubber based adhesives for fixing PVC tiles to cement
12994 : 1990 Epoxy adhesives, room temperature curing general purpose
List of Standards
Following are the Indian Standards for various building materials and components, to be complied with in fulfillment of the requirements of the Code.
In the following list, while enlisting the Indian Standards, the materials have been categorized in such a way as to make the list user friendly. In the process, if so required, some of the standards have been included even in more than one category of products, such as in the category based on composition as well as on end application of the materials. The list has been arranged in alphabetical order of their principal category as given below:
IS No.
Title
733 : 1983
Specification for wrought aluminium and aluminium alloys, bars, rods and sections for general engineering purposes (third revision)
737 : 1986
Specification for wrought aluminium and aluminium alloys, sheet rods and strip for general engineering purposes (third revision)
1. ALUMINIUM AND OTHER LIGHT METALS AND THEIR ALLOYS
2. BITUMEN AND TAR PRODUCTS
3. BUILDER'S HARDWARES
738 : 1994
Specification for wrought aluminium and aluminium alloy drawn tube for general engineering purposes (third revision)
4. BUILDING CHEMICALS
5. BUILDING LIME AND PRODUCTS
6. BURNT CLAY PRODUCTS
7. CEMENT AND CONCRETE (including concrete reinforcement)
740 : 1977
Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (second revision)