In this Code, where reference is made to ‘accepted standards’ in relation to material specification, testing or other related information or where reference is made to ‘good practice’ in relation to design, constructional procedures or other related information, the Indian Standards listed at the end of the concerned Parts/Sections may be used to the interpretation of these terms.
At the time of publication, the editions indicated in the above Indian Standards were valid. All standards are subject to revision and parties to agreements based on the Parts/Sections are encouraged to investigate the possibility of applying the most recent editions of the standards.
In the list of standards given at the end of each Part/Section, the number appearing in the first column indicates the number of the reference in that Part/Section. For example:
a) accepted standard [3(1)] refers to the standard given at serial number 1 of the list of standards given at the end of Part 3, that is IS 8888 (Part 1) : 1993 ‘Guide for requirements of low income housing: Part 1 Urban area (first revision)’.
b) good practice [4(3)] refers to the standard given at serial number 3 of the list of standards given at the end of Part 4, that is IS 15394 : 2003 ‘Code of practice for fire safety in petroleum refinery and fertilizer plants’
c) accepted standard [4(11)] refers to the standard given at serial number 11 of the list of standards given at the end of Part 4, that is IS 11360 : 1985 ‘Specification for smoke detectors for use in automatic electrical fire alarm system’.
d) good practice [4(28)] refers to the standard given at serial number 28 of the list of standards given at the end of Part 4, that is IS 12456 : 1988 ‘Code of practice for fire protection of electronic data processing installations’
e) good practice [10-2(3)] refers to the standard given at serial number 3 of the list of standards given at the end of Section 2 of Part 10, that is IS 401 : 2001 ‘Code of practice for preservation of timber (fourth revision)’.
( xiii )
Information for the Users
For the convenience of the users, the National Building Code of India 2005 is available as a comprehensive volume as well as in the following five groups, each incorporating the related Parts/Sections dealing with particular area of building activity:
| Group 1 | For Development, Building Planning and Related Aspects | Part 0: | Integrated Approach — Prerequisite for Applying Provisions of the Code |
| Part 2: | Administration | ||
| Part 3: | Development Control Rules and General Building Requirements | ||
| Part 4: | Fire and Life Safety | ||
| Part 5: | Building Materials | ||
| Part 10: | Landscaping, Signs and Outdoor Display StructuresSection 1 Landscape Planning and DesignSection 2 Signs and Outdoor Display Structures | ||
| Group 2 | For Structural Design and Related Aspects | Part 0: | Integrated Approach — Prerequisite for Applying Provisions of the Code |
| Part 6: | Structural Design | ||
| Section 1 Loads, Forces and Effects | |||
| Section 2 Soils and Foundations | |||
| Section 3 Timber and Bamboo | |||
| 3A Timber | |||
| 3B Bamboo | |||
| Section 4 Masonry | |||
| Section 5 Concrete | |||
| 5A Plain and Reinforced Concrete | |||
| 5B Prestressed Concrete | |||
| Section 6 Steel | |||
| Section 7 Prefabrication, Systems Building and Mixed/Composite Construction | |||
| 7A Prefabricated Concrete | |||
| 7B Systems Building and Mixed/Composite Construction | |||
| Group 3 | For Construction Related Aspects including Safety | Part 0: | Integrated Approach — Prerequisite for Applying Provisions of the Code |
| Part 7: | Constructional Practices and Safety | ||
| Group 4 | For Aspects Relating to Building Services | Part 0: | Integrated Approach — Prerequisite for Applying Provisions of the Code |
| Part 8: | Building Services | ||
| Section 1 Lighting and Ventilation | |||
| Section 2 Electrical and Allied Installations | |||
| Section 3 Air conditioning, Heating and Mechanical Ventilation | |||
| Section 4 Acoustics, Sound Insulation and Noise Control | |||
| Section 5 Installation of Lifts and Escalators | |||
| Group 5 | For Aspects Relating to Plumbing Services including Solid Waste Management | Part 0: | Integrated Approach — Prerequisite for Applying Provisions of the Code |
| Part 9: | Plumbing Services | ||
| Section 1 Water Supply, Drainage and Sanitation (including Solid Waste Management) | |||
| Section 2 Gas Supply |
The information contained in different groups will essentially serve the concerned professionals dealing in the respective areas.
( xiv )
The National Building Code of India consists of the following Parts and Sections:
- PART 0 INTEGRATED APPROACH — PREREQUISITE FOR APPLYING PROVISIONS OF THE CODE ... 12
- PART 1 DEFINITIONS ... 16
- PART 2 ADMINISTRATION ... 24
- PART 3 DEVELOPMENT CONTROL RULES AND GENERAL BUILDING REQUIREMENTS ... 64
- PART 4 FIRE AND LIFE SAFETY ... 88
- PART 5 BUILDING MATERIALS ... 40
- PART 6 STRUCTURAL DESIGN
- Section 1 Loads, Forces and Effects ... 104
- Section 2 Soils and Foundations ... 48
- Section 3 Timber and Bamboo
- 3A Timber ... 50
- 3B Bamboo ... 24
- Section 4 Masonry ... 44
- Section 5 Concrete
- 5A Plain and Reinforced Concrete ... 90
- 5B Prestressed Concrete ... 6
- Section 6 Steel ... 8
- Section 7 Prefabrication, Systems Building and Mixed/Composite Construction
- 7A Prefabricated Concrete ... 22
- 7B Systems Building and Mixed/Composite Construction ... 12
- PART 7 CONSTRUCTIONAL PRACTICES AND SAFETY ... 70
- PART 8 BUILDING SERVICES
- Section 1 Lighting and Ventilation ... 48
- Section 2 Electrical and Allied Installations ... 68
- Section 3 Air Conditioning, Heating and Mechanical Ventilation ... 48
- Section 4 Acoustics, Sound Insulation and Noise Control ... 44
- Section 5 Installation of Lifts and Escalators ... 42
- PART 9 PLUMBING SERVICES
- Section 1 Water Supply, Drainage and Sanitation (including Solid Waste Management) ... 90
- Section 2 Gas Supply ... 14
- PART 10 LANDSCAPING, SIGNS AND OUTDOOR DISPLAY STRUCTURES
- Section 1 Landscape Planning and Design ... 30
- Section 2 Signs and Outdoor Display Structures ... 24
( xv )
PART 0 INTEGRATED APPROACH — PREREQUISITE FOR APPLYING PROVISIONS OF THE CODE
BUREAU OF INDIAN STANDARDS
- FOREWORD
- ... 3
- 1 SCOPE
- ... 5
- 2 TERMINOLOGY
- ... 5
- 3 GENERAL
- ... 5
- 4 TEAM APPROACH
- ... 5
- 5 PLANNING, DESIGNING AND DEVELOPMENT
- ... 6
- 6 CONSTRUCTION/EXECUTION (ACTUALIZATION)
- ... 7
- 7 OPERATION AND MAINTENANCE
- ... 8
- ANNEX A BRIEF DETAILS OF THE COVERAGE OF VARIOUS PROVISIONS ... 9
- UNDER DIFFERENT OTHER PARTS/SECTIONS OF THIS CODE
National Building Code Sectional Committee, CED 46
In order to provide safe and healthy habitat, careful consideration needs to be paid to the building construction activity. Building planning, designing and construction activities have developed over the centuries. Large number of ancient monuments and historical buildings all over the world bear testimony to the growth of civilization from the prehistoric era with the extensive use of manual labour and simple systems as appropriate to those ages to the present day mechanized and electronically controlled operations for designing and constructing buildings and for operating and maintaining systems and services. In those days those buildings were conceptualized and built by master builders with high levels of artisan skills. Technological and socio-economic developments in recent times have led to remarkable increase in demand for more and more sophistication in buildings resulting in ever increasing complexities. These perforce demand high levels of inputs from professionals of different disciplines such as architecture, civil engineering, structural engineering, functional and life safety services including special aspects relating to utilities, landscaping, etc in conceptualization, spatial planning, design and construction of buildings of various material and technology streams, with due regard to various services including operation, maintenance, repairs and rehabilitation aspects throughout the service life of the building.
This Code, besides prescribing the various provisions, also allows freedom of action to adopt appropriate practices and provides for building planning, designing and construction for absorbing traditional practices as well as latest developments in knowledge in the various disciplines as relevant to a building including computer aided and/or other modern sensors aided activities in the various stages of conceptualization, planning, designing, constructing, maintaining and repairing the buildings. India being a large country with substantial variations from region to region, this Code has endeavoured to meet the requirements of different regions of the country, both urban and rural, by taking into consideration factors, such as, climatic and environmental conditions, geographical terrain, proneness to natural disasters, ecologically appropriate practices, use of eco-friendly materials, reduction of pollution, protection and improvement of local environment and also socio-economic considerations, towards the creation of sustainable human settlements.
This Part of the Code dealing with ‘integrated approach’ is being included for the first time. It gives an overall direction for practical applications of the provisions of different specialized aspects of spatial planning, designing and construction of buildings, creation of services, and proposes an integrated approach for utilizing appropriate knowledge and experience of qualified professionals right from the conceptualization through construction and completion stages of a building project and indeed during the entire life cycle. The ‘integrated approach’ should not only take care of functional, aesthetic and safety aspects, but also the operational and maintenance requirements. Also, cost optimization has to be achieved through proper selection of materials, techniques, equipment installations, etc. Further, value engineering and appropriate management techniques should be applied to achieve the aim set forth for the purpose of construction of a building fully meeting the specified and implied needs of spatial functions, safety and durability aspects, life and health safety, comfort, services, etc in the building
The aim of the ‘integrated approach’ is to get the maximum benefit from the building and its services in terms of quality, timely completion and cost-effectiveness. In the team approach which is an essential pre-requisite for integrated approach, the aim clearly is to maximize the efficiency of the total system through appropriate optimization of each of its sub-systems. In other words, in the team, the inputs from each of the professional disciplines have to be so optimized that the total system’s efficiency becomes the maximum. It may be reemphasized that maximizing the efficiencies of each sub-system may not necessarily assure the maximization of the efficiency of the total system. It need hardly to be stated that specified or implied safety will always get precedence over functional efficiency and economy. Further, progressive approach such as that relating to the concept of intelligent buildings would be best taken care of by the ‘integrated approach’ as laid down in this Part
Quality systems approach and certification thereunder covering the various dimensions brought out above may go a long way in achieving the above goal of real integrated approach.