3.1.1Additional FAR
Additional FAR, as provided in the Master Plan may also be examined with a view to provide flexibility and also to utilize the scarce urban land optimally. Flexible range of FAR on a site may be based upon its Additional FAR Factor which is a product of ‘creativity’ and ‘context’. Creativity can be defined by design parameters such as urban form, parking provision, pedestrian safety, concern for the poor through induced informal activities, and provisions for evacuation during an emergency due to disaster (for example, Delhi falls in the Zone 5). It also includes the impact of the design on essential services and environment. As a principle, the additional FAR should not result in a negative impact on the essential services and environment.
Locational attributes, of the site being assigned additional FAR, refer to its location with respect to land use as given in the approved Master/Zonal/Layout Plan (as the case may be), accessibility, level of congestion on the approach road and nearness to a heritage building if any.
Additional FAR Factor
= Creativity x context
= Design parameters x Locational attributes
= (a+b+c+d+e) m.n.o.p.
x + y
Where, a = Parking provision value
b = Disaster emergency provision value
c = Urban Form value
Chapter 3
Development Codes
d = Pedestrian Safety value
e = Induced informal activities value
x = Impact on essential services value
y = Impact on environment value
m = Land Use value
n = Accessibility (Right of way of the approach road) value
o = Congestion (Mobility index in terms of travel speed) value
p = Heritage Value
3.1.2 Purchasable FAR
Provision of purchasable FAR in Group Housing, Commercial, Institutional, and Industrial, Sport and amusement complex, recreational greens and Low Density Sports plot may be considered, where:
(i) The Plots exist on ’24 meters and above’ wide road.
(ii) The construction has not started, or
(iii) The allottee wants to construct a new additional building within the limits of permissible ground coverage, or
(iv) The allottee wants to construct new building on the vacant plot, or
(v) The allottee has already constructed building within purchasable FAR limits, or
(vi) Purchasable FAR may be allowed on minimum 18.00meters road width and above road width for institutional and industrial use.
Explanation: The Purchasable FAR shall be allowed up to the maximum limit of the applicable FAR in the Building Regulations.
Purchasable may FAR be allowed with the following provision/ conditions:
(i) No construction shall be allowed beyond the limit of maximum permissible ground Coverage.
(ii) Parking facilities shall be provided within the plot as per the provisions of the building bylaws.
(iii) No objection certificate from the Airport Authority of India/ Competent Authority shall be obtained for the height of the building.
(iv) Structure design duly checked and verified by the I.I.T/ N.I.T./Government Engineering College shall be submitted along with the proposal in case where additional floors are being proposed.
(v) No objection certificate for Fire Safety and Environmental Clearance shall be obtained from the Competent Authorities.
(vi) Purchasable FAR shall be applicable only on the basis of assessment of planned and available physical infrastructure.
(vii) Use of purchasable FAR shall be governed by the terms and conditions of lease deed.
(viii) In case where purchasable FAR is allowed, the Authority shall permit increase in the height of building as per requirement.
(ix) Additional proportionate residential units shall be allowed on purchasable FAR for Group Housing.
(i) Purchasable FAR is an enabling provision. It shall not be allowed to any Allottee as a matter of right.
(ii) With the consideration of Traffic density, conditions of approach road, availability of physical infrastructure, distance from the protected area and heritage sites or in the light of planning the Authority may identify the zones/ areas where purchasable FAR shall not be allowed.
(iii) In case of mixed land use permitted in any pocket/plot:
Permissible FAR for various uses shall be as applicable for respective use including the purchasable FAR. The total FAR in the pocket/plot shall be subject to the overall permissible FAR for the pocket/plot. Purchasable FAR shall be calculated on the basis of the FAR of the individual uses within that pocket/plot.
Chapter 3
Development Codes
3.1.3 Floating FAR
The Authority shall allow development by restricting / regulating height of the building width of abutting road and plot sizes. This method is based on the carrying capacity analysis of the infrastructure planned. In keeping with the norm in the provision of infrastructure adjusted to the percentage, plot owners shall be permitted to use the additional FAR on payment basis.
Basis for increasing FAR: Carrying Capacity analysis tool is useful to rationalize fixation of FAR including increase in given FAR. Two major determining factors should be considered:
1. V/C (V= volume, C= capacity)
V/C: optimum level is 0.8; it can be relaxed upto 0.9. Above 0.9 is dysfunctional and 1.0 is not desirable.
2. LPCD of piped water supply
The planned LPCD should be as per the minimum of norm i.e. 135 liters. However, the density is to be capped by the Development/ Master Plan as per the threshold.
Note: Assignment of Values for flexible FAR and other calculations may be referred from URDPFI Guidelines, 2014
3.2Development norms and standards for hill towns
The suggested norms and standards are only indicative and can be suitably modified depending upon the local conditions both physical and environment. In hill areas, the space standards are affected by the topography and environment and therefore the following factors shall be considered while setting norms in such areas:
i) Exposure to sunlight
ii) Degree of slopes and accessibility in the form of distance traveled.
iii) Basic needs of the people
iv) The conservation principle.
v) Alternative modes of transportation Communication network.
vi) Mobile facilities and emergency facilities.
3.3Parking standard
Parking space shall be provided for different types of development as per norms given in Master Plan/Development Plan or as given below:
3.3.1 The following Table 3.1 may be referred to for deciding the parking norms for different use zone/activities only minimum required value of ECS and NOT a range should be specified in the development plan. It can be changed in subsequent plan depending upon need based upon local vehicle ownership, mass transportation and consequent parking needs.
| S.No. | Land use | Parking Standards | Remark |
| 1 | Residential | ||
| Residential Plot-Plotted Housing | 1.5ECS in plot size 100-300 sqm 2.5 ECS in plot size 300-500 sqm& Additional 1ECS for every per 100 sqm. | ||
3.3.2 Multi Storeyed parking
Special permission shall be sought for development of buildings specifically for parking. Permission shall be granted based on width of road, requirement for parking space, FAR available and other parameters as specified by the competent authority.
Minimum Area of plot: 2000 sqm
Hilly Area 1000 sqm
Minimum number of car parking spaces: 50.00 sqm
Development of such parking lots may be undertaken by offering tradable FAR to the developer in lieu of development of parking lots which may be surrendered to competent authority on completion.
28
3.3.3 Stilt Parking
Mandatory stilt floor construction for residential apartment, mixed building, coaching institute, training center, Nursing Home, Poly Clinic, Hotels, Hostels, Paying Guest, Assembly Buildings and other related buildings to accommodate parking requirement as per parking standard given at Table 3.1.