1 .0 General
In these Arunachal Pradesh Bye-Laws 2019, unless the context otherwise requires the definition given shall have the meaning indicated against each term.
All mandatory Master Plan/Zonal Plan regulations regarding use, land use, coverage, FAR, set- back, open space, height, number of stories, number of dwelling units, parking standards etc. for various categories of buildings including modification therein made from time to time shall be applicable mutatis mutandis in the Arunachal Pradesh Bye-Laws 2010 regulations under this clause. All amendments / modifications made in the aforesaid regulations shall automatically stand deemed to have been included as part of these Bye-laws.
1.1 Definitions
-
“Access" - A clear approach to a plot or a building.
-
“Act”- The Act means Arunachal Pradesh Municipal Act 2007 (Act No. 4 of 2008) and Arunachal Pradesh Urban and Country Planning Act 2007 (Act No. 3 of 2008).
-
“Addition and/or Alteration”- A change from one occupancy to another, or structural change including an addition to the area or change in height or the removal of part of building, or any change to the structure, such as the construction or removal or cutting into of any wall or part of a wall, partition, column, beam, joist, floor including a mezzanine floor or other support, or a change to or closing of any required means of access ingress or egress or a change to fixtures or equipment" as provided in these Bye-Laws.
-
“Advertising Sign”- Any surface or structure with characters, letters or illustrations applied thereto and displayed in any manner whatsoever outdoors for the purpose of advertising or giving information or to attract the public to any place, person, public performance, article, or merchandise, and which surface or structure is attached to, forms part of, or is connected with any building, or is fixed to a tree or to the ground or to any pole, screen, fence or hoarding or displayed in space, or in or over any water body included in the jurisdiction of the Authority.
-
“Air-conditioning”- The process of treating air so as to control simultaneously its temperature, humidity, purity, distribution and air movement and pressure to meet the requirements of the conditioned space.
-
“Amenity”- Includes roads, street, open spaces, parks, recreational grounds, playgrounds, gardens, water supply, electric supply, street lighting, sewerage, drainage, public works and other utilities, services and conveniences.
-
“Application”- An application made in such form as may be prescribed by the Authority from time to time.
-
“Approved”- As approved/sanctioned by the Authority under applicable Bye-Laws.
-
“Architect”- A person holding a graduate degree in Bachelor of Architecture from any institute recognized by the Council of Architecture (COA) and has his/her name entered in the register of COA for the time being, with a valid COA Registration number. (Please see Appendix “E”- Qualification and Competence of Technical Personnel for Preparation of Schemes for Building Permit and Supervision).
-
“Architect/Professional on record”- An architect/Competent professional who is brought on record to represent his/her client for a construction project, to act on their behalf regarding building permits and process of construction (as detailed at Section6.3.8 and competence given as per Appendix ‘E’). He/She may be registered with the Authority for the cause.
-
“Area”- In relation to a building means the superficies of a horizontal section thereof made at the plinth level inclusive of the external walls and of such portions of the party walls as belong to the building.
Department of Town Planning & ULBs, Govt. of Arunachal Pradesh| Arunachal Pradesh Building Byelaws 2019||
Chapter 1
[DEFINITIONS
-
“Authority”- The Authority which has been created by a statute for the purpose of administering and authorizes a committee or an official or an agency to act on its behalf; hereinafter called the Authority till an executing authority is notified”. The Director/Chief Town Planner of Town Planning & Urban Local Body, Government of Arunachal Pradesh shall be the administering authority referred to this matter.
-
“Balcony”- A horizontal projection, cantilevered or otherwise including a parapet "handrail, balustrade, to serve as a passage or sit out place.
-
“Barsati”- A habitable room/rooms on the roof of the building with or without toilet /kitchen.
-
“Basement or Cellar”-The lower storey of a building, below or partly below the ground level, with one or more than one level. Basement cannot be used as dwelling place or human habitation but incidental uses such as parking, servicing, storage, electrical equipment, etc
For slope areas, floors below road level can be treated as Basement. Dwelling or human habitation can be permitted, provided three sides of the building are open and maintain Fire Safety norms (including minimum specified staircase with Fire Exit Facility) and as mention in clause 4.26 & 4.27. FAR of such Basement shall be calculated.
Apart from above ground level/road level, if there is road accessibility in lowest floor, such floor cannot be treated as basement when three sides are open and natural lit up. Further, height of the building shall be calculated from the approach road of the lowest floor/basement floor.
- “Building”- A structure constructed with any materials whatsoever for any purpose, whether used for human habitation or not, and includes:-
i) Foundation, plinth, walls, floors, roofs, chimneys, plumbing and building services, fixed platforms etc.
ii) Verandahs, balconies, cornices, projections etc.
iii) Parts of a building or anything affixed thereto;
iv) Any wall enclosing or intended to enclose any land or space, sign & outdoor display structures; etc.,
v) Tanks constructed or fixed for storage of chemicals or chemicals in liquid form and for storage of water, effluent, swimming pool, ponds etc.,
vi) All types of buildings as defined in (a) to (q) below, except tents, shamianas and tarpaulin shelters erected temporarily for temporary purposes and ceremonial occasions, shall be considered to be "buildings".
Types of Buildings based on use of premises or activity:
a. “Residential Building”- includes a building in which sleeping and living accommodation is provided for normal residential purposes, with cooking facilities and includes one or more family dwellings, apartment houses, flats, and private garages of such buildings.
b. “Educational Building”- Includes a building exclusively used for a school or college, recognized by the appropriate Board or University, or any other Competent Authority involving assembly for instruction, education or recreation incidental to educational use, and including a building for such other uses as research institution. It shall also include quarters for essential staff required to reside in the premises, and building used as a hostel captive to an educational institution whether situated in its campus or outside.
c. “Institutional Building”- Includes a building constructed by Government, Semi-Government Organizations or Registered Trusts and used for medical or other treatment, or for an auditorium or complex for cultural and allied activities or for an hospice, care of persons suffering from physical or mental illness, handicap, disease or infirmity, care of orphans, abandoned women, children and infants, convalescents, destitute or aged persons and for penal or correctional detention with restricted liberty of the inmates ordinarily providing sleeping accommodation and includes dharamshalas, hospitals, sanatoria, custodial and penal institutions such as jails, prisons, mental hospitals, houses of correction, detention and reformatories etc.
Chapter 1
[DEFINITIONS
d. “Assembly Building”- A building or part thereof, where groups of people (not < 50)congregate or gather for amusement, recreation, social, religious, patriotic, civil, travel and similar purposes and this includes buildings of drama and cinemas theatres, drive-in-theatres, assembly halls, city halls, town halls, auditoria, exhibition halls, museums, "mangal karyalayas", skating rinks, gymnasia, restaurants, eating or boarding houses, places of worship, dance halls, clubs, gymkhanas and road, railways, air, sea or other public transportation stations and recreation piers.
e. “Business Building”- Includes any building or part thereof used principally for transaction of business and/or keeping of accounts and records including offices, banks, professional establishments, court houses etc., if their principal function is transaction of business and/or keeping of books and records.
f. “Mercantile Building”- Includes a building or part thereof used as shops, stores or markets for display and sale of wholesale and or retail goods or merchandise, including office, storage and service facilities incidental thereto and located in the same building
g. “Industrial Building”- Includes a building or part thereof wherein products or material are fabricated, assembled or processed, such as assembly plants, laboratories, power plants, refineries, gas plants, mills, dairies and factories etc.,
h. “Storage Building”- A building or part thereof used primarily for storage or shelter of goods, wares, merchandise and includes a building used as a warehouse, cold storage, freight depot, transit shed, store house, public garage, hanger, truck terminal, grain elevator, barn and stables.
i. “Hazardous Building”- Includes a building or part thereof used for-
i. Storage, handling, manufacture of processing of radioactive substances or highly combustible or explosive materials or of products which are liable to burn with extreme rapidity and/or producing poisonous fumes or explosive emanations.
ii. Storage, handling, manufacture or processing of which involves highly corrosive, toxic or noxious alkalis, acids, or other liquids, gases or chemicals producing flame, fumes and explosive mixtures etc. or which result in division of matter into fine particles capable of spontaneous ignition
j. “Mixed Land Use Building”- A building partly used for non-residential activities and partly for residential purpose.
k. “Wholesale Establishment”- An establishment wholly or partly engaged in wholesale trade and manufacture, wholesale outlets, including related storage facilities, warehouses and establishments engaged in truck transport, including truck transport booking agencies.
Types of buildings based on design and height:
a. “Detached Building”- Includes a building with walls and roofs independent of any other building and with open spaces on all sides within the same plot.
b. “Multi-Storeyed Building or High Rise Building”- A building above 4 stories, and/or a building exceeding 15 meters or more in height (without stilt) and 17.5M (including stilt).
c. “Semi-detached Building”- A building detached on three sides with open space as specified in these regulations.
Types of buildings based on other features:
a. “Special Building”- Includes all buildings like assembly, industrial, buildings used for wholesale establishments, hotels, hostels, residential apartment, hazardous, mixed occupancies, with any of the aforesaid occupancies and centrally air conditioned buildings having total built up area exceeding 500 sqm.
b. “Multi Level Car parking”- A building partly below ground level having two or more basements or above ground level, primarily to be used for parking of cars, scooters or any other type of light motorized vehicle.
Types of buildings based on safety due to use/ maintenance level:
Chapter 1
[DEFINITIONS
a. “Slum” – Buildings that are in poor condition of maintenance or have compromised habitability due to poor ventilation, sanitation or otherwise are termed slums. These are generally declared or notified as slums under relevant legislation by competent authority
b. “Unsafe Building”- Includes a building which:
i) Is structurally unsafe, or
ii) Is insanitary, or
iii) Is not provided with adequate means of ingress or egress or
iv) Constitutes a fire hazard or
v) Is dangerous to human life or
vi) In relation to its existing use, constitutes a hazard to safety or health or public welfare by maintenance, dilapidation or abandonment.
Note: All unsafe buildings /structure will require to be restored by repairs, demolition or dealt with as directed by the Authority. The relevant provisions of the Act shall apply for procedure to be followed by the Authority in taking action against such buildings.
- “Building Height”- The vertical distance measured: -
i) In the case of flat roofs from the average level of the front road and continuance to the highest point of the building.
ii) In case of pitched roofs upto the point where the external surface of the outer wall intersects the finished surface of the sloping roof and
iii) In the case of gables facing the road midpoint between the eaves level and the ridge. Architectural features serving no other function except that of decoration shall be excluded for the purpose of measuring heights.
iv) The height of the building shall be taken from lowest basement floor and continuance upto highest point of building.
-
“Building Envelope” - The horizontal spatial limits up to which a building may be permitted to be constructed on a plot.
-
“Building Line”- The line upto which the plinth of building adjoining a street or an extension of a street or on a future street may lawfully extends and includes the lines prescribed, if any, in any scheme and/or development plan. The building line may change from time-to-time as decided by the Authority.
-
“Cabin”- A non-residential enclosure constructed of non-load bearing partitions.
-
“Canopy”- shall mean a cantilevered projection from the face of the wall over an entry to the building at the lintel or slab level provided that:
I. It shall not project beyond the plot line.
II. It shall not be lower than 2.4 m. or 7’- 6” when measured from the ground.
III. There shall be no structure on it and the top shall remain open to sky.
-
“Carpet Area” - The covered area of the usable rooms of a dwelling unit / at any floor (excluding the area of the walls).
-
“Chajja”- A sloping or horizontal structural overhang provided over openings on external walls for protection from the weather.
-
“Chimney”- A construction by means of which a flue is formed for the purpose of carrying products of combustion to the open air and includes a chimneystack and flue pipe.
-
"Construction" - Any erection of a structure or a building, including any addition or extension thereto either vertically or horizontally, but does not include, any reconstruction, repair and renovation of an existing structure or building, or, construction, maintenance and cleansing of drains and drainage works and of public latrines, urinals and similar conveniences, or, the construction and maintenance of works meant for providing supply of water for public, or, the construction or maintenance, extension,
Chapter 1
[DEFINITIONS
management for supply and distribution of electricity to the public; or provision for similar facilities for publicity.
-
“Conversion”- The change from one occupancy to other occupancy or any change in building structure or part thereof resulting in a change of space and use requiring additional occupancy certificate.
-
“Cornice”- means a sloping or horizontal structural overhang usually provided over openings or external walls to provide protection from sun and rain.
-
“Courtyard”- A space permanently open to sky, enclosed fully or partially by buildings and may be at ground level or any other level within or adjacent to a building.
-
“Covered Area”- The Ground area covered immediately above the plinth level covered by the building but does not include the space covered by:
a. Garden, rockery, well and well structures, plant nursery, water pool, swimming pool (if uncovered), platform round a tree, tank, fountain, bench, chabutra with open top and unenclosed on sides by walls and the like;
b. Drainage culvert, conduit, catch-pit, gully-pit, chamber, gutter and the like;
c. Compound wall, gate, slide/ swing door, canopy, and areas covered by chajja or similar projections and staircases which are uncovered and open at least on three sides and also open to sky.
-
“Damp Proof Course”- A course consisting of some appropriate water proofing material provided to prevent penetration of dampness or moisture.
-
“Density”- The residential density expressed in terms of the number of dwelling units per hectare.
Note: Where such densities are expressed exclusive of community facilities and provision of open spaces and major roads (excluding incidental open spaces), these will be net residential densities. Where these densities are expressed taking into consideration the required open space provision and community facilities and major roads, these would be gross residential densities at neighborhood level, sector level or town level, as the case may be. The provision of open spaces and community facilities will depend on the size of the residential community. Incidental open spaces are mainly open spaces required to be left around and in between two buildings to provide lighting and ventilation.
-
“Development” - ‘Development’ with grammatical variations means the carrying out of building, engineering, mining or other operations, in, or over, or under land or water, on the making of any material change, in any building or land, or in the use of any building, land, and includes re-development and layout and subdivision of any land and ‘to develop’ shall be construed accordingly.
-
“Development Plan”- See “Master Plan”
-
“Deviation”–A difference created in building construction or plan with the specified rules/norms.
-
“Drain”- A conduit or channel for the carriage of storm water, sewage, waste water or other waterborne wastes in a building drainage system.
-
“Drainage system” - A system or a line of pipes, with their fittings and accessories, such as manholes, inspection chambers, traps, gullies, floor traps used for drainage of building or yards appurtenant to the buildings within the same cartilage; and includes an open channel for conveying surface water or a system for the removal of any waste water.
-
“Dwelling”- A building or a portion thereof which is designed or used wholly or principally for residential purposes for one family.
-
“Empaneled Architect”- Qualified Architect registered in the Competent Authority for designing/drawing of building plans as per rules under the approved byelaws as unauthorized profession to designing/drawing of building plans.
-
“Encroachment”- means an act to enter into the possession or rights either of permanent or temporary nature on a land or built up property of local body or state/ central Government.
Chapter 1
[DEFINITIONS
-
“Enclosed Staircase”- means a staircase separated by fire resistant walls and doors from the rest of the building.
-
“Existing Building”- A building or structure existing authorisedly with the approval of the Authority before the commencement of these Bye-Laws.
-
“Existing Use”- Use of a building or structure existing authorisedly with the approval of the Authority before the commencement of these Bye-Laws.
-
“Exit”- A passage channel or means of egress from the building, its storey or floor to a street or, other open space of safety; whether horizontal, outside and vertical exits meaning as under:-
i) Horizontal exit means an exit, which is a protected opening through or around a fire well or bridge connecting two or more buildings.
ii) Outside exit means an exit from building to a public way to an open area leading to a public way or to an enclosed fire resistant passage leading to a public way.
iii) Vertical exit means an exit used for ascending or descending between two or more levels including stairway, fire towers, ramps and fire escapes.
-
“External Wall”- An outer wall of a building not being a party wall even though adjoining to a wall of another building and also means a wall abutting on an interior open space of any building.
-
“Floor”- The lower surface in a storey on which one normally walks in a building, and does not include a mezzanine floor. The floor at ground level with direct access to a street or open space shall be called the ground floor; the floor above it shall be termed as floor- 1, with the next higher floor being termed as floor-2, and so on upwards.
-
“Floor Area Ratio (FAR)”- The quotient obtained by dividing the combined covered area (plinth area) of all floors, excepting areas specifically exempted under these regulations, by the total area of the plot, viz.: -