60.1 All buildings shall comply with the standards as mentioned below:
Structural Design: The structural design of foundation, elements of masonry, timber, plain concrete, reinforced concrete, prestressed concrete and structural steel shall be carried out in accordance with Part-6 of Group-2 structural design and related aspects, section-I loads, forces and effects] section-2 soils and foundations, section-3 Timber and bamboo, 3A timber, 3B bamboo, section-4 masonry, section-5 concrete, 5A plain and reinforced concrete, 5B pre stressed concrete and section-6 steel, section-7 prefabrication, systems building and mixed/composite construction, 7A prefabricated concrete, 7B systems building and mixed/composite construction of National Building Code of India, 2005 taking into consideration all relevant Indian Standards prescribed by Bureau of Indian Standards including the Indian Standard as given below for structural safety. In case of High Rise Buildings a Certificate of Under Taking for Hazard Safety Requirement shall be submitted in Form-XIV.
60.2 For General Structural Safety
-
IS: 456:2000 "Code of Practice for Plain and Reinforced Concrete
-
IS: 800-1984 "Code of Practice for General construction in Steel
-
IS: 801-1975 "Code of Practice for Use of Cold Formal Light Gauge Steel Structural Members in General Building Construction
-
IS 875 (Part 2): 1987 Design loads (other than earthquake) for buildings and structures Part 2 Imposed Loads
-
IS 875 (Part 3): 1987 Design loads (other than earthquake) for buildings and structures Part 3 Wind Loads
-
IS 875 (Part 4): 1987 Design loads (other than earthquake) for buildings and structures Part 4 Snow Loads
-
IS 875 (Part 5): 1987 Design loads (other than earthquake) for buildings and structures Part 5 special loads and load combination
-
IS: 883:1966 "Code of Practice for Design of Structural Timber in Building
-
IS: 1904:1987 "Code of Practice for Structural safety of Buildings: Foundation"
-
IS 1905:1987 "Code of Practice for Structural Safety of Buildings: Masonry Wall
-
IS 2911 (Part 1): Section 1: 1979 "Code of Practice for Design and Construction of Pile Foundation Section 1


60.3 For Earthquake Protection
-
IS: 1893-2002 "Criteria for Earthquake Resistant Design of Structures (Fifth Revision)"
-
Is: 13920-1993 "Ductile Detailing of Reinforced concrete Structures subjected to Seismic Forces - Code of Practice"
-
IS:4326-1993 "Earthquake Resistant Design and Construction of Buildings- Code of Practice (Second Revision)"
-
IS: 13828-1993 "Improving Earthquake Resistance of Low Strength Masonry Buildings - Guidelines"
-
IS:13827-1993 "Improving Earthquake Resistance of Earthen Buildings - Guidelines",
-
IS: 13935-1993 “Repair and Seismic Strengthening of Buildings - Guidelines”
Quality of ‘Materials and Workmanship’: All material and workmanship shall be of good quality conforming generally to the accepted standards of Public Works Department and Indian standard specification and codes as included in Part-5 of Group-i Building Materials and Part-7 of Group-3 Construction practices and safety of National Building Code of India.
60.5 Alternative Materials, Methods of Design and Construction' and Tests: The provisions of these bye laws are not intended to prevent the use of any material or method of design or construction not specifically prescribed by these bye laws provided any such alternative has been approved. The building materials approved by B.I.S. or any statutory body will form part of the approved building material and technology as part of the bye laws.
60.6 Building Services
60.6.1 The Planning design and 'installation of electrical installations, air conditioning installation of lifts and escalators can' be carried out in accordance with Part-8 of Group-4 Building Services, section 1-Lighting and Ventilation, section-2 Electrical and Allied Installations, section-3, Air conditioning and heating, section-4 acoustics, sound insulation and noise control, section-S installation of lifts and escalators of National Building Code of India, 2005.
60.6.2 The requirements of electric sub-station and the provision of electric sub-station shall also require approval from the concerned Authority.
laser ∞.
60.7 Plumbing Services
The planning, design, construction and installation of water supply, drainage and sanitation and gas supply system shall be in accordance with Part-9 of Group-5, Plumbing Services, section-i water supply, drainage and sanitation (including solid waste management) section-2 gas supply of National Building Code of India 2005.
nimo h###