a) Nagpur Metro Rail Corridor (NMRC) - It is the area falling within 500 m. distance on either side of the Nagpur Metro Rail measured from its Centre line and also includes the area falling within 500 m. distance from the longitudinal end of the last Metro Railway Station. This regulation is also applicable for all the Planning Authorities from where the Metro Rail is passing through.
b) Base permissible FSI - It is the FSI that is otherwise permissible on any land with respect to zone shown as per the sanctioned development plan and the relevant provision of the Principal DCR excluding the TDR and the premium FSI, redevelopment incentive FSI that can be received.
c) Gross plot area - Gross Plot Area means total area of land after deducting area under reservation or deemed reservation like amenity space if any, area under D.P. Road and Road widening.
ii) Maximum Permissible FSI
The maximum permissible total FSI in NMRC shall be 4.00 including the basic permissible FSI, subject to condition that, the additional FSI over and above the basic permissible FSI shall be allowed within the overall limit of maximum permissible FSI, as given in the Table No 14 O below :-
| Table No. 14 O | |||
| Sr. No. | Minimum Road Width | Plot Area | Maximum Permissible FSI |
| 1 | 9.00 m. | Below 1000 Sq.m. | 2.00 |
| 2 | 9.00 m. | 1000 Sq.m. or above | 3.00 |
| 3 | 12.00 m. | 2000 Sq.m. or above | 3.50 |
| 4 | 15.00 m. | 2000 Sq.m. or above | 4.00 |
(#) Clarification issued Vide Letter No.CR 236/18 (Part 1), dt. 14th January, 2021.
(1) Inserted vide Notification u/s 37 (1AA)(C) & 20(4) No.CR 158/19, dt. 10th October, 2022
Explanation:-
-
The maximum permissible FSI as per the above Table shall be determined by satisfaction of both the criterias viz. Minimum Road width as well as plot area, simultaneously. However in case, both these criterias are not satisfied simultaneously, the maximum permissible FSI shall be the minimum of that permissible against each of these two criterias, as illustrated below ;
-
Land owner / Developer shall not have option to use TDR in NMRC.
Illustrations: -
| Table No. 14 P | ||||
| Plot Area | Road width | |||
| Less than 9m. | 9 m. & above | 12 m. & above | 15 m.&above | |
| below 1000 Sq.m. | As mentioned in Chapter 6 | 2 | 2 | 2 |
| 1000 Sq.m. up to 2000 sq. m. | As mentioned in Chapter 6 | 3 | 3.5 | 3.5 |
| Above 2000 Sq.m. | As mentioned in Chapter 6 | 3 | 3.5 | 4.0 |