Previous generations of cellular infrastructure can no longer keep pace with the growing demand for communication (data transmission) bandwidth and throughput. The macro towers that have been serving Fourth-Generation Long-Term Evolution (4G LTE) networks cannot connect to the rapidly growing number of devices that users are simultaneously utilizing. The next generation of cellular technology, 5G, represents a paradigm shift for cellular infrastructure.
As the roll-out of 5G continues, more and more radios need to be deployed and networks will need to be densified. The Macro radios provide excellent coverage and high capacity. However, in some cases, for example dense-urban locations dominated by tall buildings, providing the necessary coverage can be challenging. Similarly, where there are high numbers of mobile-users, such as busy city-centers and transportation hubs, providing enough capacity needs from a single radio can also be challenging. In these cases, outdoor small cells are ideal solutions for improved coverage. These solutions include micro remote radio heads and high-capacity 5G millimeter wave radios. Around 80% of mobile broadband traffic originates from mobile users located indoors. However, ensuring good indoor coverage can also be a challenge, especially as the higher frequencies used by 5G are more prone to signal propagation limitations than previous generations of mobile technology. To help overcome this, it is essential to consider indoor small cells as a deployment option.
Mobile operators will look to small cell deployment technology to add data capacity in areas of traffic congestion. This dense small cell network increases both the radios per subscriber and provides subscribers improved signal quality for more efficient data transfer. The shorter distance between radio sites also helps overcome the short signal reach of higher frequency 5G radio spectrum. As a result, small cells are becoming the leading solution in growing the data capacity of the network.
Small cells are therefore required in the 5G network due to the following reasons:
- Offloading: The Macro site of the area is getting congested and is unable to serve the entire community of the area.
• Capacity Enhancement: The macro site serving the building/ area is unable to meet the capacity requirements of some parts of the building/ spot.
- Low Coverage of Signal: Higher spectrum band.
- Indoor Coverage: In building solutions are essential for indoor coverage including basements, underground metro tunnels etc.
Various small cell product types exist generally depending on, among other attributes, their targeted coverage range (transmit power) and provided capacity. These small cell variants include (but are not limited to) femtocells, picocells and microcells/metrocells – broadly increasing in cell range from femtocells (the smallest) to metrocells (the largest) as summarized below:
- Femtocells: A low-power, short range, self-contained small cells. Initially used to describe consumer small cell units intended for residential homes, the term has expanded to encompass higher capacity units for enterprise, and metropolitan areas.
- Picocells: Typically used to describe low power compact base stations, used in enterprise or public indoor areas, the term is sometimes used to encompass outdoor small cells as well.
- Microcells: Typically used to describe an outdoor short-range base station aimed at enhancing coverage for both indoor and outdoor users where macro coverage is insufficient. Occasionally installed indoors to provide coverage and capacity in areas above the scope of a picocells.
- Metrocells: A recent term used to describe small cell technologies designed for high-capacity metropolitan areas. Such devices are typically installed on building walls or street furniture (e.g., lampposts). This category can include technologies such as femtocells, picocells and microcells where they meet
these deployment criteria.