10.1 Procedure for Determining Fenestration Product U-factor and Solar Heat Gain Coefficient
§ 4.2.1.1 and § 4.2.1.2 require that U-factors and solar heat gain coefficients (SHGC) be determined for the overall fenestration product (including the sash and frame) in accordance with ISO 15099. The building envelope trade-off option in § 4.3.5 requires the use of visible light transmittance (VLT).
In several cases, ISO 15099 suggests that individual national standards will need to be more specific and in other cases the ISO document gives users the choice of two options. This section clarifies these specific issues as they are to be implemented for this code:
a) § 4.1 of ISO 15099: For calculating the overall U-factor, ISO 15099 offers a choice between the linear thermal transmittance (4.1.2) and the area weighted method (4.1.3). The area weighted method (4.1.3) shall be used.
b) § 4.2.2 of ISO 15099: Frame and divider SHGC’s shall be calculated in accordance with § 4.2.2. The alternate approach in § 8.6 shall not be used.
c) § 6.4 of ISO 15099 refers the issue of material properties to national standards. Material conductivities and emissivity shall be determined in accordance with Indian standards.
d) § 7 of ISO 15099 on shading systems is currently excluded.
e) § 8.2 of ISO 15099 addresses environmental conditions. The following are defined for India:
For U-factor calculations:
T in = 2 4 ° C
Tout = 32 °C
V = 3. 3 5 m/s
T r m, out = T out
T r m, i n = T i n
I s = 0 W / m ²
For SHGC calculations:
T in = 2 4 ° C
T out = 3 2 ° C
V = 2. 7 5 m/s
T r m, o u t = T o u t
T r m, i n = T i n
Is = 783 W/m²
f) § 8.3 of ISO 15099 addresses convective film coefficients on the interior and exterior of the window product. In § 8.3.1 of ISO 15099, simulations shall use the heat transfer coefficient based on the center of glass temperature and the entire window height; this film coefficient shall be used on all indoor surfaces, including frame sections. In § 8.3.2 of ISO 15099, the formula from this section shall be applied to all outdoor exposed surfaces.
g) § 8.4.2 of ISO 15099 presents two possible approaches for incorporating the impacts of self-viewing surfaces on interior radiative heat transfer calculations. Products shall use the method in § 8.4.2.1 of ISO 15099 (Two-Dimensional Element to Element View Factor Based Radiation Heat Transfer Calculation). The alternate approach in § 8.4.3 of ISO 15099 shall not be used.
