Delhi is planned on a ring - radial pattern with a hierarchical road network. Broadly, the road network is designed for regional, intra - city and local traffic. The proposed roads are classified taking into account the land use pattern and road system hierarchy with recommended right of ways as follows:
1. National Highways
All National Highways (5 Nos.) are connected to the city’s Ring-Radial arterial road network system resulting in regional traffic passing through the city in absence of any bypass. National Highways Authority of India (NHAI) should incorporate the Street Design Regulations [Annexure-12.0 (I)] while designing the National highways in Delhi during strengthening/ redesigning/ widening/ upgrading of the National Highways in Delhi as per periodic maintenance by the road owning agency. The recommended Right of Way (ROW) is 90 meters, wherever possible. However, within the city it shall not be less than 60 meters. All the National Highways within the NCTD shall be access controlled upto the Delhi Border and follow regulations as per the Arterial roads.
2. Arterial Roads
Arterial Roads provide long distance mobility connecting one part of the city to another, carrying heavy volume of traffic of all modes. These include ROW above 30 m, and need to have multi-modal high-capacity Public transportation systems apart from private motor vehicular movement space, in addition to fully segregated space for pedestrians and NMT.
3. Collector Roads
Collector roads provide connections between neighbourhoods and also connect local streets to arterial roads. All roads with ROW above 12 m to 30 m may be considered as collector roads. However, the existing roads which are less than 30m yet functioning as Arterial Roads on ground may be continued in future also.
4. Local Streets
These are intended for neighbourhood (or local) use on which through traffic is to be discouraged. The suggested ROW is 9 to 12 m in the existing and proposed urban area. These roads should be made pedestrian and bicycle friendly by using modern traffic calming designs to keep the speeds within limits as per design. A special cell should be set up within Transport Department for developing standards and guidelines for traffic calming designs and for their implementation in the whole city in a phased manner.
As a matter of general policy, it is proposed that for all categories of roads, the full cross section should be developed in future and no encroachments will be permitted on the existing road network. Further, the development of roads should start from the extremes ends of the designated ROW.
The following definitions for various components of Roads may be considered for planning and enforcement purposes:
i) ‘Right of way’ (ROW) is a reserved space for movement of all modes of traffic which includes pedestrian, cycles, cycle rickshaws, buses, cars, scooter, taxis, autorickshaws, etc. ROWs are shown on the Zonal Plan and Master Plan of Delhi with designated widths. Space for services, underground / overground utilities, public conveniencies and amenities, vendors drinking water kiosks, etc, must be planned and reserved within the ROW, without encroaching on walking space or motor vehicle movement space, as per street design regulations.
ii) ‘Carriageway’ is a reserved space for movement of motorized vehicles only, in case segregated space is reserved for non-motorized vehicles within the ROW, and for mixed traffic in case segregated space is not reserved for NMT.
iii) NMV / Cycle Track – is a reserved space for movement of non-motorized vehicles like cycle, cycle rickshaws and hand pull carts.
iv) Cross-section of the road- shows the typical space reservation along the width of the ROW for all motorized vehicles (cars, scooter, buses etc.) non-motorized vehicles (cycle, cycle rickshaws etc.), pedestrians, medians, street furniture, utilities, etc. within the Right of Way (ROW).
| Arterial Roads | Collector Roads | Local Streets | |
|---|---|---|---|
| RIGHT OF WAY | > 30 M | >12 - 30 M | 9 - 12 M |
| SUGGESTED SPEED LIMIT | 40 - 50 km/hr | 20 - 30 km/hr | 10 - 20 km/hr |
| SPEED CONTROL | Enforcement and Traffic Calming required | Enforcement and Traffic calming required. | Enforcement and Traffic calming required |
| BUSWAYS | Segregated busways (3.5 M) per direction | Demarcated bus-lanes (3.3 M) per direction. | No segregated bus lanes required. |
| MOTORIZED LANES | 2 to 3 motorized lanes (min. 3.3 m wide each) per direction, excluding busways | 1 to 2 motorized lanes (min. 3.1 m wide each) per direction, excluding buslanes | No minimum lane width specification. |
| CYCLE/ NMV TRACKS | Segregated cycle tracks required; min. 2.5 m wide for two-way movement. | Traffic calming essential where segregated cycle lanes (min. 2.5 m) are not provided. | No special provision for cyclists |
| SERVICE LANES | Service lanes required. | No service lane required | No service lane required |
| MEDIANS AND JUNCTIONS | Continuous median; all openings and intersections accompanied by signals and traffic calming. | Intermittent or No median; openings/ intersections accompanied by signals and traffic calming. | No medians; traffic calmed crossings, or mini roundabouts |
12.3.1 Road Network and Connectivity
In the current scenario, only arterial roads are forming the network system of the city. There is complete absence of a secondary road network system resulting in restricted distribution of traffic over a network and concentration of even local traffic on arterial roads, resulting in congestion on these roads. Further, closure of medians all along arterial / sub-arterial roads to have signal-free corridors, have restricted movement of traffic / people between neighbourhoods on either side. Moreover, connections between colonies are also not planned to enable direct connectivity to local destinations, forcing people to come on to arterial roads to make even short local trips.
In order to reduce congestion on the existing roads, it is proposed to identify additional/ alternative links and access corridors to augment the current network, with the following measures:
Augmentation of road network to distribute high traffic volume over multiple roads, instead of stand-alone corridor / junction capacity improvement strategies.
ii. Road networks to be planned with a vehicular route network of approximately 250 m c/c, as also specified in the NMSH parameters, 2011. Additional pedestrian/ NMT thoroughfares should be provided as required.
iii. Road networks/ alignments need to be planned with minimum disruption of existing settlements/ structures and environmentally significant areas sensitive to such development.
iv. All roads to be cleared from impediments and developed as per street design regulations [Annexure-12.0 (I)].
v. Area level parking management should be taken up as part of network improvement for effective utilization of the capacity of roads to augment the network.
vi. In urban extension, alignment of all right-of-ways should be based on ground realities to minimise disruption to existing settlements. The right-of-ways of Zonal Plan roads may be reconsidered as required, if network augmentation as per above criteria is achieved through a greater number of roads with smaller ROWs.
vii. All UERs to be designed and implemented with a mass transit system such as a Metro, LRT, BRT etc.
12.3.2 Road Maintenance and Management
Factors like achieving good level of service and removal of impediments go a long way in providing safety and usability and all vulnerable road users. Therefore, the institutional mechanism for long term, regular maintenance and management of roads needs to be strengthened by all road owning and maintaining agencies. Maintenance of road and transport infrastructure should be part of construction and retrofitting projects by all road owning agencies.
12.3.3 Intersections and Crossings
Intersections and crossings are the most crucial components of a road network system as they allow directional traffic to move through the junctions, resulting in complex movements and conflict points for MV, NMV and pedestrian traffic. Intersections must be designed to reduce delays and increase safety for all road users, with a priority to non-motorized and public transport modes. The design of intersections with proper signalization and signage, markings etc. is very important for regulated and safe movement of all modes. Road owning agencies concerned shall be responsible for installing the appropriate road signages and markings, and maintaining them on regular basis.
In Delhi the average distance of signalized intersections allowing movement of all modes, is very large. This creates barriers to movement of pedestrians, cyclists and public transport users for crossing the road or interchanging between modes or accessing destinations. To facilitate easy interchange between modes and allow local trips to be made on NMT or foot, mid-block crossings need to be provided at approximately every 250 metres or less.
In addition, pedestrians including children, women, elderly and the differentially-abled, must be given the shortest possible direct route to cross the street, therefore the most preferred crossing for them is “atgrade” with signalization, both at intersections and mid-block crossings.
Pedestrian signals should be synchronized with the nearest traffic signals, for smooth movement of traffic along with safe pedestrian/ NMT crossing.
Foot Over Bridges (FOBs) are to be considered as an exception, not the rule. They are to be provided only under circumstances where no atgrade crossings are feasible. For rapid transit corridors, grade separated crossings such as FOBs may be considered in case no other solution is possible at grade.
Grade separators may also be provided at junctions as per codes, where thoroughfare traffic may be in high volume. Care must be taken that
local level connectivity at the ground level and safe at-grade crossings are provided for all modes as per the criteria of this Section. In any case, grade separator should not be implemented as a stand-alone project but as part of a comprehensive network plan with traffic circulation system and traffic management measures for an influence area around the junction.
12.3.4 Regional Network & Connectivity
The primary function of the regional road network is to provide strategic regional linkages for safe and efficient movement of both passengers and goods between the NCT and other regional centres. While this is essential, it is equally critical to ensure the mobility and safety needs of local communities and neighborhoods are not compromised.
In this regard, Regional Plan-2021 for NCR has proposed regional road connectivity and transportation connectivity like Regional Rapid Transit System (RRTS) which have been incorporated in the ‘Sub Regional Transport Network Plan for Delhi’ at [Annexure-12.0 (II)] for providing strong linkages between Delhi and its neighbouring states, with an efficient transportation links for performing work and other trips in a regular manner. The following strategies may be adopted:
i) Discourage vehicular trips external to Delhi to go through the NCT.
ii) All national highways within the NCT boundary to be treated as urban arterial roads and retrofit as per street design regulations [Annexure-12.0 (I)].
iii) To segregate passengers and goods movements to improve safety and efficiency.