To ensure availability of minimum capabilities (regarding monitoring, control, user-interface, data sharing and grid connectivity) and to successfully deliver basic smart home experience to user, a minimum set of smart home devices should to be installed in a home. Table indicating the minimum device/capability requirement for each functionality of SHEMS is provided below:
23 A case study of barriers and solutions – Smart Home by Connected Device Alliance (CDA), which is a network of more than 350 government and industry participants that have come together to work on the energy efficiency opportunities provided by networked devices. Further information on the CDA is available at: https://cda.iea-4e.org
Bureau of Energy Efficiency
| Functionality Monitoring | Smart home device and/or solution Home level phase-wise energy and load monitoring Two 15A outlets for energy use monitoring of two appliances One temperature and humidity sensor One occupancy sensor |
|---|---|
| Control* | One AC Controller to control set point, mode of operations, ON/OFF with provision of receiving control signals One Geyser Controller for ON/OFF, with provision of receiving control signals One Controllable light with provision of receiving control signal |
| User interface | Common user interface (app, voice or gesture based), to connect smart home devices over single software package for energy use monitoring and control |
| Grid connectivity | Able to participate in utility demand response program |
| Data sharing | Typical daily indoor conditions, and device-wise energy consumption, and hours of usage to be reported once a month in anonymous way |