Embodied energy in construction in India (especially in “formal’ residential buildings of the sort that are covered by the ENS code) can sometimes be of the order of magnitude of many decades of operating energy use9 and therefore is very significant to consider when such a code is being developed.
However, this was true for non-air-conditioned housing stock, and it seems likely that, like in the developed economies, increasing consumption of operating energy (e.g., for appliances, common area services, air-conditioning etc.) may cause the embodied energy to become less significant compared to operating energy. Still this is an important area to include in the code.
Embodied energy is also important because much of it is consumed in the form of primary energy (coal, oil, fuels) causing direct pollution and carbon emissions.
Embodied energy is the sum of all energy used in the construction process, i.e., in the product, transport and installation: from the extraction of raw materials, manufacture of materials and fabrication of products, to their transportation and installation in buildings. It is often measured in megajoules per square meter. But its units can also be kWh(th) (Thermal Kilowatt hours, with 1kWh(th) being equivalent of 3600 kJ) per sqm of built-up-area, making it more easily comparable with EPI of the ENS code.
Cement and steel are the major contributors of embodied energy in residential building construction in India. According to the study conducted by Jadavpur University10, 98% of the embodied energy is attributed to the embodied energy of the materials used and 2% is the contribution of actual erection of the building. Unfortunately, embodied energy is often “hidden” in industry for the manufacture and transport of materials, and the transportation of workers.
Institutes of technological research need to be tasked with creating standards for embodied energy benchmarks based on average and best practice. If necessary this research needs to attract funds from the building industry and foundations.
Embodied Energy measured in kWh(th)/sqm and Operating Energy measured in kWh(th)/sqm.year can be combined. In order to combine the (capital) embodied energy with the operating energy, it is necessary to merge the two to units equivalent of kWh(th)/sqm.year so that a single number can represent the energy performance of a project.
In a recent piece of research for Technology Information Forecasting and Assessment Council of India11, it was found that the best way to translate from kWh(th)/sqm (Embodied Energy) to
9 The Mud Village project, sponsored by HUDCO, entry by Studio Plus, 1987
10 Embodied Energy Analysis of Multi-storied Residential Buildings in Urban India, S Bardhan - WIT Transactions on Ecology and the Environment, 2011
11 Technology Vision 2035, Technology Information Forecasting and Assessment Council (TIFAC) 2014
Bureau of Energy Efficiency
kWh(th)/sqm.year (equivalent Operating Energy) would be to set up a notional or actual discount/ replacement rate of construction taking its nominal life, say, as:
50 years life leading to a 2% replacement rate of stock for mainstream buildings
20 years life leading to a 5% replacement rate of stock for temporary industrial materials (steel) buildings.
And so, on
According to a study by HUDCO12, affordable housing uses 4257 MJ/sqm of embodied energy and so at a rated life of 50 years (or 2% replacement rate), this is equivalent of 85 MJ/sqm.year or 23.6 kWh(th)/sqm.year which is substantial for a building without air-conditioning but low for a building with various mechanical systems using up substantial operating energy.
This can be codified along with other benchmarks in the ENS code after suitable characterisation, study, analysis of best practices, and benchmarking.